DANTE CERTIFICATION LEVEL 2 ACTUAL EXAM PAPER 2026 QUESTIONS WITH SOLUTIONS GRADED A+

DANTE CERTIFICATION LEVEL 2 ACTUAL
EXAM PAPER 2026 QUESTIONS WITH
SOLUTIONS GRADED A+

●● Can the Secondary (redundant) port on a Dante device be connected
to the Primary network to increase channel count?
Answer: No. This will cause the network to fail.


●● How does one setup Dante redundancy?
Answer: Connect a second set of cables and switches to create a network
that uses only the Secondary port of Dante devices


●● Can the Secondary (redundant) port be configured to daisy chain
devices?
Answer: Yes, but only on certain Dante devices. Always check.


●● When would you select the "Enable Sync to External" box for
devices on the DC Clock Status tab?
Answer: When a device is either a) connected to an external word clock,
or b) when using the internal clock of a device to drive a Dante option
card


●● Dante [ ... ] use unicast as the default mode of transmission.

, Answer: does


●● A unicast network connection is:
Answer: - Communication that is only between specific devices on a
network
- Default Dante behavior


●● A multicast network connection is:
Answer: - One to many
- Useful for solving "Fan out" conditions


●● A broadcast network connection is:
Answer: - One to everyone
- Not used by Dante for audio
- A common type of network traffic


●● A unicast Dante Flow can contain up to [ ... ] different Tx channels of
audio from the same device.
Answer: 4


●● How does Dante Controller inform you that multicast is
recommended?
Answer: With a "Fan out' warning.