ESSENTIALS OF FIRE FIGHTING 7TH
EDITION (CHAPTER 3) 2026/2027
ACTUAL QUESTIONS WITH VERIFIED
ANSWERS.
Building codes require that: - correct answer-glass doors are
made from tempered glass.
the open web of designed truss joint: - correct answer-permits
rapid fire spread in multiple directions.
Which safety hazard are firefighters most likely to find in the
space between the ceiling and the roof? - correct answer-
electrical wiring
Type V construction buildings may have a veneer of stucco,
brick, or stone that: - correct answer-provides little fire
protection.
,Which characteristic of Type IV construction buildings can
contribute to the intensity of a fire once it starts? - correct
answer-High concentration of wood
How are rolling steel shutters often used? - correct answer-
Protect openings in an industrial fire wall
What condition often found in Type III construction buildings is
likely to negatively influence fire behavior? - correct answer-
Void spaces between wall studs
When working on a roof, firefighters should be aware that roof
openings or penetrations: - correct answer-may be difficult to
access if they are locked or secured.
Which type of window has one or more top-hinged, outward-
swinging sashes that permit the window to be opened during
rain? - correct answer-Awning window
Why are sliding doors not allowed as part of the means of
egress? - correct answer-They slow travel of people through
the door opening
, Which construction classification includes buildings with
exterior load bearing walls composed entirely of wood and is
commonly referred to as wood frame construction? - correct
answer-type V
With regard to local building codes, firefighters should be aware
that: - correct answer-an AHJ can amend model building codes
to meet local needs.
In order to ensure firefighter safety in case of rapid egress,
window security bars and grilles: - correct answer-must be
removed or disabled when interior operations begin.
Type II construction buildings are composed of: - correct
answer-noncombustible materials that do not add to the fuel
load.
Which type of roofing material develops its design strength
when it is placed into forms and then hardens at the building
site? - correct answer-Cast-in-place concrete
EDITION (CHAPTER 3) 2026/2027
ACTUAL QUESTIONS WITH VERIFIED
ANSWERS.
Building codes require that: - correct answer-glass doors are
made from tempered glass.
the open web of designed truss joint: - correct answer-permits
rapid fire spread in multiple directions.
Which safety hazard are firefighters most likely to find in the
space between the ceiling and the roof? - correct answer-
electrical wiring
Type V construction buildings may have a veneer of stucco,
brick, or stone that: - correct answer-provides little fire
protection.
,Which characteristic of Type IV construction buildings can
contribute to the intensity of a fire once it starts? - correct
answer-High concentration of wood
How are rolling steel shutters often used? - correct answer-
Protect openings in an industrial fire wall
What condition often found in Type III construction buildings is
likely to negatively influence fire behavior? - correct answer-
Void spaces between wall studs
When working on a roof, firefighters should be aware that roof
openings or penetrations: - correct answer-may be difficult to
access if they are locked or secured.
Which type of window has one or more top-hinged, outward-
swinging sashes that permit the window to be opened during
rain? - correct answer-Awning window
Why are sliding doors not allowed as part of the means of
egress? - correct answer-They slow travel of people through
the door opening
, Which construction classification includes buildings with
exterior load bearing walls composed entirely of wood and is
commonly referred to as wood frame construction? - correct
answer-type V
With regard to local building codes, firefighters should be aware
that: - correct answer-an AHJ can amend model building codes
to meet local needs.
In order to ensure firefighter safety in case of rapid egress,
window security bars and grilles: - correct answer-must be
removed or disabled when interior operations begin.
Type II construction buildings are composed of: - correct
answer-noncombustible materials that do not add to the fuel
load.
Which type of roofing material develops its design strength
when it is placed into forms and then hardens at the building
site? - correct answer-Cast-in-place concrete
