OSHA 510 LATEST 2026 EXAMS TEST
QUESTIONS AND ANSWERS SURE A+
✔✔the least preferred way to control exposure is - ✔✔PPE
✔✔hazard + exposure = - ✔✔injury
✔✔incident rates allow for a comparative level of injuries between different ____,
_____, or _____ - ✔✔industries
organizations
operations
✔✔TRIR: - ✔✔Total Recordable Incident Rate
✔✔DART: - ✔✔Days Away Restricted Transferred
✔✔employers must provide fall protection when - ✔✔
✔✔OSHA considers the three types of conventional fall protection to be - ✔✔guardrails
personal fall arrest systems (PFAS)
safety nets
✔✔a guardrail consists of a: - ✔✔top rail
mid rail
, toe board
✔✔a guardrail consists of a top rail that must be ___ inches high +/- ___ and hold ____
lbs - ✔✔42
3
200
✔✔the guardrail consists of a mid rail that must be halfway and hold ____ lbs - ✔✔150
✔✔the guardrail consists of a toe board that must be ___ inches high and hold ____ lbs
- ✔✔4
50
✔✔a PFAS consists of: - ✔✔anchorage point
bosy harness
connector/lanyard
✔✔the PFAS consists of an anchorage point that can hold ____ lb per worker -
✔✔5,000
✔✔when stopping a fall, a personal fall arrest system shall bring an employee to a
complete stop and limit the maximum deceleration distance to ____ feet - ✔✔3 & 1/2
✔✔Personal fall arrest systems, when stopping a fall, shall be rigged such that an
employee cannot free fall more than ____ feet or contact any lower level. - ✔✔3 & 1/2
✔✔safety nets must be as ____ to the workers as possible and be ____ tested -
✔✔close as practicable
drop
✔✔when mechanical equipment is being used perpendicular to the roof edge, the
warning lines cannot be closer than ____ feet. - ✔✔10
✔✔OSHA requires that scaffolding being erected, moved, dismantled or altered be
supervised by a _____ person - ✔✔
✔✔on temporary stairs, handrails (to provide adequate handholds for employees
grasping to prevent falling) shall have a minimum clearance of ____ inches between the
handrail and walls. - ✔✔3
✔✔a controlled decking zone can only be used as fall protection up to a maximum
height of ____ feet. - ✔✔30
QUESTIONS AND ANSWERS SURE A+
✔✔the least preferred way to control exposure is - ✔✔PPE
✔✔hazard + exposure = - ✔✔injury
✔✔incident rates allow for a comparative level of injuries between different ____,
_____, or _____ - ✔✔industries
organizations
operations
✔✔TRIR: - ✔✔Total Recordable Incident Rate
✔✔DART: - ✔✔Days Away Restricted Transferred
✔✔employers must provide fall protection when - ✔✔
✔✔OSHA considers the three types of conventional fall protection to be - ✔✔guardrails
personal fall arrest systems (PFAS)
safety nets
✔✔a guardrail consists of a: - ✔✔top rail
mid rail
, toe board
✔✔a guardrail consists of a top rail that must be ___ inches high +/- ___ and hold ____
lbs - ✔✔42
3
200
✔✔the guardrail consists of a mid rail that must be halfway and hold ____ lbs - ✔✔150
✔✔the guardrail consists of a toe board that must be ___ inches high and hold ____ lbs
- ✔✔4
50
✔✔a PFAS consists of: - ✔✔anchorage point
bosy harness
connector/lanyard
✔✔the PFAS consists of an anchorage point that can hold ____ lb per worker -
✔✔5,000
✔✔when stopping a fall, a personal fall arrest system shall bring an employee to a
complete stop and limit the maximum deceleration distance to ____ feet - ✔✔3 & 1/2
✔✔Personal fall arrest systems, when stopping a fall, shall be rigged such that an
employee cannot free fall more than ____ feet or contact any lower level. - ✔✔3 & 1/2
✔✔safety nets must be as ____ to the workers as possible and be ____ tested -
✔✔close as practicable
drop
✔✔when mechanical equipment is being used perpendicular to the roof edge, the
warning lines cannot be closer than ____ feet. - ✔✔10
✔✔OSHA requires that scaffolding being erected, moved, dismantled or altered be
supervised by a _____ person - ✔✔
✔✔on temporary stairs, handrails (to provide adequate handholds for employees
grasping to prevent falling) shall have a minimum clearance of ____ inches between the
handrail and walls. - ✔✔3
✔✔a controlled decking zone can only be used as fall protection up to a maximum
height of ____ feet. - ✔✔30
