Fusion 360 Certification Exam Review Guide
ACTUAL UPDATED QUESTIONS AND CORRECT
ANSWERS
Overall Mass Total weight of a body, component, or assembly.
Volume The amount of space occupied by a body,
component, or assembly.
Surface Area The total area that the surface of a body,
component, or assembly occupies.
Area The extent of a two-dimensional surface within a
boundary.
Perimeter The continuous line forming the boundary of a
closed geometric figure.
Sketching an angle Creating an angular representation in a sketch.
Geometric Constraints Rules that define the relationships between
geometric entities in a sketch.
Offset Plane A plane that is parallel to a reference plane and at
a specified distance from it.
, Parametric Design A design approach that allows for the updating of
model parameters.
Projected Geometry Geometry that is projected onto another geometry
in a sketch.
Fully Constrained Geometry Geometry that has all its degrees of freedom
restricted.
Construction Line A line used as a reference in sketching that does
not become part of the final model.
Unconstrained Geometry Geometry that has not been restricted and can
move freely.
Failed Projected Geometry Geometry that could not be successfully projected
onto another geometry.
Creating an Offset Plane The process of establishing a new plane at a
specified distance from an existing one.
Extruding a Sketch The process of extending a 2D sketch into a 3D
shape.
Revolving a Sketch Creating a 3D shape by rotating a 2D sketch
around an axis.
Creating a Sweep The process of creating a 3D shape by moving a
profile along a path.
Creating a Loft The process of creating a 3D shape by connecting
multiple profiles.
ACTUAL UPDATED QUESTIONS AND CORRECT
ANSWERS
Overall Mass Total weight of a body, component, or assembly.
Volume The amount of space occupied by a body,
component, or assembly.
Surface Area The total area that the surface of a body,
component, or assembly occupies.
Area The extent of a two-dimensional surface within a
boundary.
Perimeter The continuous line forming the boundary of a
closed geometric figure.
Sketching an angle Creating an angular representation in a sketch.
Geometric Constraints Rules that define the relationships between
geometric entities in a sketch.
Offset Plane A plane that is parallel to a reference plane and at
a specified distance from it.
, Parametric Design A design approach that allows for the updating of
model parameters.
Projected Geometry Geometry that is projected onto another geometry
in a sketch.
Fully Constrained Geometry Geometry that has all its degrees of freedom
restricted.
Construction Line A line used as a reference in sketching that does
not become part of the final model.
Unconstrained Geometry Geometry that has not been restricted and can
move freely.
Failed Projected Geometry Geometry that could not be successfully projected
onto another geometry.
Creating an Offset Plane The process of establishing a new plane at a
specified distance from an existing one.
Extruding a Sketch The process of extending a 2D sketch into a 3D
shape.
Revolving a Sketch Creating a 3D shape by rotating a 2D sketch
around an axis.
Creating a Sweep The process of creating a 3D shape by moving a
profile along a path.
Creating a Loft The process of creating a 3D shape by connecting
multiple profiles.
