2026 COMPLETE QUESTIONS AND
CORRECT ANSWERS GRADED A+
⩥ firing wire used in detonation systems is issued in what lengths.
Answer: 500 ft
⩥ what component in an electronically timed fuze replaces the arming
vanes used in.
Answer: electric charging assembly
⩥ which safety feature is designed to prevent movement of arming
heads, arming stems, and stickers while the fuze is being handled.
Answer: cotter pin
⩥ how do you change the firing delay times in a mechanically timed
M904 nose fue.
Answer: adjusting calibrated dial
⩥ what action must you take to set the Seconds to arm setting below 6
sec in a M904 fuze.
Answer: remove the stop screw from fuze body
,⩥ which adapter booster is used with the M904 fuze.
Answer: T45
⩥ which device Is used in place of arming wire with electrical fuzes.
Answer: battery firing device
⩥ when installed in the nose fuze how many FZU-2/B boosters are used
with the FMU-81/B.
Answer: 4
⩥ what component provides the electrical power needed to operate the
FMU-139A/B fuze.
Answer: FZU-48/B
⩥ which sensor is a radio freq radar ranging system used with the
suspension utility unit SUU-64/B, SUU-65/B and SUU-66/B dispenser.
Answer: FZU-39/B
⩥ Which proximity fuze has a height of burst setting of 15 FT above
ground level that is built into he fuze at the time of manufacture.
Answer: FMU-113/B
⩥ Which air inflatable retarder fin is used on the MK82 bomb.
, Answer: BSU-49/B
⩥ which bomb is not a penetrator.
Answer: BLU-126
⩥ Which 4,000 pound pen bomb is used as the warhead/ bomb body for
the GBU-28A/B.
Answer: BLU-113
⩥ Which bomb provides deeper penetration than the BLU-113 and is
used with the GBU- 28C/B.
Answer: BLU-122
⩥ the PDU-5/B uses which suspension utility unit.
Answer: SUU-76C/B
⩥ with the exception of the explosive filler, the BLU-126/B and BLU-
129/B are identical to the.
Answer: MK82 MOD 2 bomb
⩥ the BDU-33 series practice bomb weighs.
Answer: 25 pounds