ANSWERS SURE A+
✔✔What does the NFPA state about its official interpretations? - ✔✔Statements not
processed according to NFPA regulations are not considered official positions.
✔✔What is the consequence of using outdated NFPA Standards? - ✔✔Outdated
standards may not reflect current safety practices and knowledge.
✔✔What does the NFPA encourage regarding the development of its standards? -
✔✔Regular revisions and amendments based on current incidents and technologies.
✔✔What is the NFPA's approach to the inclusion of patents in its standards? -
✔✔NFPA adheres to ANSI's policy regarding patents and provides notices as required.
✔✔What does the NFPA not certify or inspect? - ✔✔Products, designs, or installations
for compliance with NFPA Standards.
✔✔What is the purpose of NFPA 70E? - ✔✔To provide standards for electrical safety in
the workplace.
✔✔When was the NFPA 70E 2024 edition issued? - ✔✔April 23, 2023
✔✔What is the effective date of the NFPA 70E 2024 edition? - ✔✔May 13, 2023
✔✔What major parts are included in the NFPA 70E standard? - ✔✔Installation Safety
Requirements, Safety-Related Work Practices, Safety-Related Maintenance
Requirements, Safety Requirements for Special Equipment.
✔✔What is meant by 'adoption by reference' in NFPA standards? - ✔✔Citing the title,
edition, and publishing information only, with any changes noted separately.
✔✔Which organization did NFPA assist in preparing electrical safety standards? -
✔✔OSHA (Occupational Safety and Health Administration)
✔✔What was the first edition of NFPA 70E published? - ✔✔1979
✔✔What significant change occurred in the 2004 edition of NFPA 70E? - ✔✔The title
was changed to 'Standard for Electrical Safety in the Workplace' and emphasized safe
work practices.
✔✔What is the role of the Technical Committee on Electrical Safety in the Workplace? -
✔✔To prepare and revise the NFPA 70E standard.
,✔✔What does the acronym PPE stand for in the context of NFPA 70E? - ✔✔Personal
Protective Equipment
✔✔What is the purpose of an energized electrical work permit? - ✔✔To establish
requirements for working on live electrical parts.
✔✔What does the term 'arc-rated' refer to in NFPA 70E? - ✔✔Clothing and equipment
designed to protect against arc flash hazards.
✔✔What was a major focus of the 2012 edition of NFPA 70E? - ✔✔Addressing
electrical hazards encountered by employees in current workplaces.
✔✔What is included in Annex F of NFPA 70E? - ✔✔Guidance on hazard identification
and risk assessment procedures.
✔✔What does the term 'hazard/risk category' refer to in NFPA 70E? - ✔✔A
classification system used to determine the necessary PPE based on risk assessment.
✔✔What significant revisions were made in the 2015 edition of NFPA 70E? - ✔✔A shift
in how stakeholders evaluate electrical risk.
✔✔Where can NFPA codes and standards be viewed at no cost? - ✔✔On the NFPA
website at www.nfpa.org/docinfo.
✔✔What should adopting authorities do when using NFPA standards? - ✔✔Notify
NFPA in writing of such use.
✔✔What is the significance of the 1995 edition of NFPA 70E? - ✔✔It included major
revisions to conform to the 1993 edition of the National Electrical Code (NEC).
✔✔What were the four major parts envisioned for the NFPA 70E standard? -
✔✔Installation Safety Requirements, Safety-Related Work Practices, Safety-Related
Maintenance Requirements, Safety Requirements for Special Equipment.
✔✔What is the main focus of Part II in NFPA 70E? - ✔✔Safety-Related Work Practices.
✔✔What is the purpose of the Standards Council in NFPA? - ✔✔To oversee the
development and issuance of NFPA standards.
✔✔What is the address of NFPA headquarters? - ✔✔1 Batterymarch Park, P.O. Box
9101, Quincy, MA 02269-9101.
✔✔What does the term 'limits of approach' refer to in NFPA 70E? - ✔✔The minimum
distance that must be maintained from live electrical parts.
, ✔✔What is the role of the Secretary of the Standards Council? - ✔✔To manage
communications and requests related to NFPA standards.
✔✔What major shift occurred in the 2015 edition of NFPA 70E? - ✔✔The term 'hazard
analysis' was changed to 'risk assessment' for clarity.
✔✔What must an electrical safety program consider according to NFPA 70E? - ✔✔The
condition of maintenance.
✔✔What new requirement was clarified regarding electric equipment operation? -
✔✔Where normal operation of electric equipment is permitted.
✔✔What did the new task-based table in the 2015 edition combine? - ✔✔The
previously separate ac and dc tables for determining arc flash PPE requirements.
✔✔What was introduced in the 2018 edition regarding risk assessment? - ✔✔Human
factors were included as part of the risk assessment.
✔✔What is the priority stated in NFPA 70E for electrical hazards? - ✔✔The elimination
of the electric hazard.
✔✔What was moved to informational notes in the 2018 edition? - ✔✔The tables and
text specifying PPE standards.
✔✔What does Article 120 of NFPA 70E address? - ✔✔Requirements for establishing an
electrically safe work condition.
✔✔What voltage thresholds were introduced in Article 320? - ✔✔50 Vac and 100 Vdc
for batteries and battery rooms.
✔✔What does Article 350 introduce? - ✔✔An electrical safety authority as a possible
authority having jurisdiction for laboratories.
✔✔What was revised in the 2021 edition regarding electrical safety-related work
programs? - ✔✔Incorporation of general requirements from other articles.
✔✔What specific requirements were added in Article 360? - ✔✔Safety-related
requirements for capacitors.
✔✔What does Annex D address? - ✔✔Incident Energy and Arc Flash Boundary
Calculation Methods.