NFPA 211: CH 10/12 || 100% Accurate Answers.
What type of metal pipe shall not pass through any attic, inside wall, concealed space, floor, or
ceiling? correct answers Single walled
When direct venting an appliance with an input of 10000 Btu/hr or less, how far shall the vent be
away from any building opening? correct answers 6"
If all combustible materials in the wall are cut away from the pipe a sufficient distance to provide
the clearance required by article 10.6.4.1, do you have to follow the requirements of 10.6.4.2?
correct answers NO
All vents shall terminate __________ the roof surface. correct answers Above
Vents installed with mechanical exhausters shall terminate not less than ______ in. above the
highest point where they pass through the roof surface. correct answers 12"
The bottom of a vent or air intake for a direct vent appliance shall be a minimum of _____ in.
above grade. correct answers 12"
In a structure that is 4 stories or less shall have a fire rating of ______ hrs. when the vent is
enclosed in a wall. correct answers 1 hr
The location of a solid fuel burning appliance shall be located with respect to building
construction and other equipment to allow __________ to the appliance. correct answers Access
Solid fuel-burning appliances shall not be installed in alcoves or enclosed spaces less than
______ cubic ft. correct answers 512
The space or room where the solid fuel-burning appliance is located shall be sized to allow for
___________ of heated air. correct answers circulation
Solid fuel burning appliances shall not be installed in any location where ____ or other ______
vapors or _______ are present. correct answers Gasoline, flammable, gases
Solid fuel-burning appliances shall not be installed where? correct answers In garages
Where buildings are so tight that normal infiltration does not provide the necessary air for
combustion, what shall be done? correct answers Introduction of outside air
_________ steel pipe shall not be used for solid fuel-burning appliances. correct answers
Galvanized
Can a residential type solid fuel appliance be set on a combustible floor? correct answers Yes,
and must meet requirements of the listing and conditions of approval.
What type of metal pipe shall not pass through any attic, inside wall, concealed space, floor, or
ceiling? correct answers Single walled
When direct venting an appliance with an input of 10000 Btu/hr or less, how far shall the vent be
away from any building opening? correct answers 6"
If all combustible materials in the wall are cut away from the pipe a sufficient distance to provide
the clearance required by article 10.6.4.1, do you have to follow the requirements of 10.6.4.2?
correct answers NO
All vents shall terminate __________ the roof surface. correct answers Above
Vents installed with mechanical exhausters shall terminate not less than ______ in. above the
highest point where they pass through the roof surface. correct answers 12"
The bottom of a vent or air intake for a direct vent appliance shall be a minimum of _____ in.
above grade. correct answers 12"
In a structure that is 4 stories or less shall have a fire rating of ______ hrs. when the vent is
enclosed in a wall. correct answers 1 hr
The location of a solid fuel burning appliance shall be located with respect to building
construction and other equipment to allow __________ to the appliance. correct answers Access
Solid fuel-burning appliances shall not be installed in alcoves or enclosed spaces less than
______ cubic ft. correct answers 512
The space or room where the solid fuel-burning appliance is located shall be sized to allow for
___________ of heated air. correct answers circulation
Solid fuel burning appliances shall not be installed in any location where ____ or other ______
vapors or _______ are present. correct answers Gasoline, flammable, gases
Solid fuel-burning appliances shall not be installed where? correct answers In garages
Where buildings are so tight that normal infiltration does not provide the necessary air for
combustion, what shall be done? correct answers Introduction of outside air
_________ steel pipe shall not be used for solid fuel-burning appliances. correct answers
Galvanized
Can a residential type solid fuel appliance be set on a combustible floor? correct answers Yes,
and must meet requirements of the listing and conditions of approval.
