Massachusetts Refrigeration Test -prep
Questions and Answers Latest Version Top
Rated
Question 1
Secondary refrigerants are usually
Correct Answer
Water or brine
Question 2
A rule of thumb in air conditioning is: how many cfm per ton
Correct Answer
400cfm
Question 3
522 C.VIR 9.00 has adopted for reference. Ashrae standard ?
Correct Answer
15
Page 1 of 16
,Question 4
What device proves the pilot flame in a typical furnace?
Correct Answer
Thermocouple
Question 5
When the compressor is below the condenser
Correct Answer
Traps are needed on the discharge line
Question 6
The oil separator is located
Correct Answer
Between the compressor and condenser
Question 7
The purpose of a receiver is
Correct Answer
To increase the capacity that a system can hold
Page 2 of 16
, Question 8
Which is an organic refrigerant
Correct Answer
R-717
Question 9
The density of gas refers to
Correct Answer
pounds per cubic foot
Question 10
The process of converting liquid to vapor is
Correct Answer
Vaporization
Question 11
Which creates more of a heat load
Correct Answer
90% RH
Page 3 of 16
Questions and Answers Latest Version Top
Rated
Question 1
Secondary refrigerants are usually
Correct Answer
Water or brine
Question 2
A rule of thumb in air conditioning is: how many cfm per ton
Correct Answer
400cfm
Question 3
522 C.VIR 9.00 has adopted for reference. Ashrae standard ?
Correct Answer
15
Page 1 of 16
,Question 4
What device proves the pilot flame in a typical furnace?
Correct Answer
Thermocouple
Question 5
When the compressor is below the condenser
Correct Answer
Traps are needed on the discharge line
Question 6
The oil separator is located
Correct Answer
Between the compressor and condenser
Question 7
The purpose of a receiver is
Correct Answer
To increase the capacity that a system can hold
Page 2 of 16
, Question 8
Which is an organic refrigerant
Correct Answer
R-717
Question 9
The density of gas refers to
Correct Answer
pounds per cubic foot
Question 10
The process of converting liquid to vapor is
Correct Answer
Vaporization
Question 11
Which creates more of a heat load
Correct Answer
90% RH
Page 3 of 16