Virginia (VA) Billboard Sign Contracting
(BSC) Practice Exam 2026/2027 | DPOR
Study Guide bundle
Question 1: Which Virginia agency regulates outdoor advertising signs along
interstate highways?
A) Virginia Department of Environmental Quality (DEQ)
B) Virginia Building Code Authority
C) Virginia Department of Transportation (VDOT)
D) Federal Communications Commission (FCC)
Correct ,,,answer,,,,: C. Virginia Department of Transportation (VDOT)
Rationale: VDOT regulates outdoor advertising along highways, including
billboards, under federal and state law, specifically 24 VAC 30-11.
Question 2: Under 24 VAC 30-11, what is the minimum spacing required between
off-premise signs on the same side of an interstate highway?
A) 500 feet
B) 1,000 feet
C) 1,500 feet
D) 2,500 feet
Correct ,,,answer,,,,: C. 1,500 feet
,Rationale: Virginia regulations require 1,500 feet spacing between off-premise
signs on interstates and primary highways.
Question 3: What is the minimum spacing required between billboards along a
Virginia interstate highway?
A) 250 feet
B) 500 feet
C) 1,000 feet
D) 2,000 feet
Correct ,,,answer,,,,: B. 500 feet
Rationale: Federal and Virginia guidelines mandate a minimum spacing of 500
feet between billboards along interstates.
Question 4: What is the minimum distance a billboard must be from another
billboard located outside any municipality in Virginia?
A) 500 feet
B) 800 feet
C) 1,000 feet
D) 1,500 feet
Correct ,,,answer,,,,: C. 1,000 feet
Rationale: The Virginia Outdoor Advertising Act mandates at least 1,000 feet
spacing for billboards located outside municipal boundaries.
,Question 5: What is the maximum sign area for an off-premise sign on an
interstate in Virginia?
A) 200 sq ft
B) 600 sq ft
C) 1,000 sq ft
D) 1,500 sq ft
Correct ,,,answer,,,,: B. 600 sq ft
Rationale: 24 VAC 30-11 establishes the maximum sign area at 600 square feet on
interstates and primary highways.
Question 6: What is the maximum sign face area for a standard single-sided
billboard along a Virginia interstate?
A) 200 sq ft
B) 300 sq ft
C) 400 sq ft
D) 672 sq ft
Correct ,,,answer,,,,: D. 672 sq ft
Rationale: The maximum allowed face area for a single-sided billboard along a
Virginia interstate is typically 672 square feet, in compliance with federal and state
rules.
, Question 7: Before erecting a new billboard, a contractor must obtain which of the
following?
A) A zoning permit from the local authority
B) A VDOT permit if within the right-of-way
C) Both A and B
D) Only a building permit
Correct ,,,answer,,,,: C. Both A and B
Rationale: Billboard installation requires local zoning approval and a VDOT
permit if it is located along a controlled highway.
Question 8: A sign contractor applies for a VDOT outdoor advertising permit for a
new billboard on an interstate. What is the minimum spacing required between off-
premise signs on the same side of the highway?
A) 500 ft
B) 1,000 ft
C) 1,500 ft
D) 2,500 ft
Correct ,,,answer,,,,: C. 1,500 ft
Rationale: 24 VAC 30-11 requires 1,500 ft spacing on interstates and primary
highways.
(BSC) Practice Exam 2026/2027 | DPOR
Study Guide bundle
Question 1: Which Virginia agency regulates outdoor advertising signs along
interstate highways?
A) Virginia Department of Environmental Quality (DEQ)
B) Virginia Building Code Authority
C) Virginia Department of Transportation (VDOT)
D) Federal Communications Commission (FCC)
Correct ,,,answer,,,,: C. Virginia Department of Transportation (VDOT)
Rationale: VDOT regulates outdoor advertising along highways, including
billboards, under federal and state law, specifically 24 VAC 30-11.
Question 2: Under 24 VAC 30-11, what is the minimum spacing required between
off-premise signs on the same side of an interstate highway?
A) 500 feet
B) 1,000 feet
C) 1,500 feet
D) 2,500 feet
Correct ,,,answer,,,,: C. 1,500 feet
,Rationale: Virginia regulations require 1,500 feet spacing between off-premise
signs on interstates and primary highways.
Question 3: What is the minimum spacing required between billboards along a
Virginia interstate highway?
A) 250 feet
B) 500 feet
C) 1,000 feet
D) 2,000 feet
Correct ,,,answer,,,,: B. 500 feet
Rationale: Federal and Virginia guidelines mandate a minimum spacing of 500
feet between billboards along interstates.
Question 4: What is the minimum distance a billboard must be from another
billboard located outside any municipality in Virginia?
A) 500 feet
B) 800 feet
C) 1,000 feet
D) 1,500 feet
Correct ,,,answer,,,,: C. 1,000 feet
Rationale: The Virginia Outdoor Advertising Act mandates at least 1,000 feet
spacing for billboards located outside municipal boundaries.
,Question 5: What is the maximum sign area for an off-premise sign on an
interstate in Virginia?
A) 200 sq ft
B) 600 sq ft
C) 1,000 sq ft
D) 1,500 sq ft
Correct ,,,answer,,,,: B. 600 sq ft
Rationale: 24 VAC 30-11 establishes the maximum sign area at 600 square feet on
interstates and primary highways.
Question 6: What is the maximum sign face area for a standard single-sided
billboard along a Virginia interstate?
A) 200 sq ft
B) 300 sq ft
C) 400 sq ft
D) 672 sq ft
Correct ,,,answer,,,,: D. 672 sq ft
Rationale: The maximum allowed face area for a single-sided billboard along a
Virginia interstate is typically 672 square feet, in compliance with federal and state
rules.
, Question 7: Before erecting a new billboard, a contractor must obtain which of the
following?
A) A zoning permit from the local authority
B) A VDOT permit if within the right-of-way
C) Both A and B
D) Only a building permit
Correct ,,,answer,,,,: C. Both A and B
Rationale: Billboard installation requires local zoning approval and a VDOT
permit if it is located along a controlled highway.
Question 8: A sign contractor applies for a VDOT outdoor advertising permit for a
new billboard on an interstate. What is the minimum spacing required between off-
premise signs on the same side of the highway?
A) 500 ft
B) 1,000 ft
C) 1,500 ft
D) 2,500 ft
Correct ,,,answer,,,,: C. 1,500 ft
Rationale: 24 VAC 30-11 requires 1,500 ft spacing on interstates and primary
highways.
