Page 1 of 46
CERTIFIED ELECTRICAL SAFETY
COMPLIANCE PROFESSIONAL (CESCP) 2026
EXAM COMPLETE (100) CURRENT TESTING
QUESTIONS AND CORRECT ANSWERS WITH
DETAILED EXPLANATIONS|GUARANTEED
PASS.
CESCP
Prepare with confidence using this Certified Electrical Safety
Compliance Professional (CESCP) Exam, designed to assess
advanced knowledge of electrical safety standards and compliance
practices. It focuses on hazard identification, OSHA regulations,
NFPA 70E standards, risk assessment, lockout/tagout procedures,
and safe work practices. The exam strengthens understanding of
electrical safety management in industrial and commercial
environments. Suitable for electrical professionals and safety
officers preparing for CESCP certification.
MULTIPLE CHOICE.
1. According to NFPA 70E-2024, when must an Electrical Safety
Program (ESP) be documented?
• A) Only for systems operating at more than 600 V
• B) Only for contractors, not for host employers
• C) Always, regardless of voltage or risk level
, Page 2 of 46
• D) Only when specifically requested by OSHA
*Rationale: NFPA 70E-2024 Article 110.1(H)(1) requires the
Electrical Safety Program to be documented at all times,
irrespective of voltage or perceived risk level.*
2. What is the primary goal of an Electrical Safety Program as
stated in NFPA 70E-2024?
• A) Zero lost-time injuries
• B) Practical elimination of electrical hazards through
risk assessment and controls
• C) Full compliance with the National Electrical Code (NEC)
• D) Reduction of insurance premiums
Rationale: Article 110.1(A) explicitly states that the goal of the
ESP is the practical elimination of electrical hazards by means
of risk assessment and appropriate control measures.
3. Who bears ultimate responsibility for enforcing the Electrical
Safety Program?
• A) Each qualified person individually
• B) The safety manager only
• C) All employees collectively
• D) The employer (or a designated responsible person)
Rationale: 110.1(B) assigns final responsibility to the employer
or a specifically designated responsible person.
, Page 3 of 46
4. According to 110.1(H)(2), how often must the Electrical Safety
Program be audited?
• A) At intervals not to exceed 3 years
• B) Annually
• C) Only when an incident occurs
• D) At the discretion of the employer
Rationale: The ESP must be audited at regular intervals not
exceeding three years. The audit is performed by persons not
directly responsible for the day-to-day operation of the ESP.
5. According to NFPA 70E-2024, an "incident" is defined as:
• A) Any near-miss event
• B) An event resulting in death, injury, or damage to
property
• C) Any deviation from the safety program
• D) Any unplanned event
Rationale: Article 100 defines an incident as an event that
results in death, injury, or damage to property. "Near misses" are
events that could have resulted in an incident but did not.
6. Under 110.2, which of the following is required for "qualified
persons"?
• A) General safety training only
, Page 4 of 46
• B) Training specific to the task, voltage, and energy
exposure
• C) A 4-year engineering degree
• D) OSHA certification
Rationale: Article 110.2 requires that qualified persons be
trained and knowledgeable about the specific equipment and
hazards to which they will be exposed.
7. According to 110.2(F), how often must electrical safety
training be retrained?
• A) Annually
• B) At intervals not to exceed 3 years
• C) Only when equipment changes
• D) As determined solely by the employee
Rationale: Retraining must occur at intervals not to exceed three
years, or whenever employee performance indicates a need for
additional training.
8. The hierarchy of risk control methods, as referenced in 110.1,
places the highest priority on what control method?
• A) Elimination
• B) Substitution
• C) Engineering controls
• D) Personal Protective Equipment (PPE)
CERTIFIED ELECTRICAL SAFETY
COMPLIANCE PROFESSIONAL (CESCP) 2026
EXAM COMPLETE (100) CURRENT TESTING
QUESTIONS AND CORRECT ANSWERS WITH
DETAILED EXPLANATIONS|GUARANTEED
PASS.
CESCP
Prepare with confidence using this Certified Electrical Safety
Compliance Professional (CESCP) Exam, designed to assess
advanced knowledge of electrical safety standards and compliance
practices. It focuses on hazard identification, OSHA regulations,
NFPA 70E standards, risk assessment, lockout/tagout procedures,
and safe work practices. The exam strengthens understanding of
electrical safety management in industrial and commercial
environments. Suitable for electrical professionals and safety
officers preparing for CESCP certification.
MULTIPLE CHOICE.
1. According to NFPA 70E-2024, when must an Electrical Safety
Program (ESP) be documented?
• A) Only for systems operating at more than 600 V
• B) Only for contractors, not for host employers
• C) Always, regardless of voltage or risk level
, Page 2 of 46
• D) Only when specifically requested by OSHA
*Rationale: NFPA 70E-2024 Article 110.1(H)(1) requires the
Electrical Safety Program to be documented at all times,
irrespective of voltage or perceived risk level.*
2. What is the primary goal of an Electrical Safety Program as
stated in NFPA 70E-2024?
• A) Zero lost-time injuries
• B) Practical elimination of electrical hazards through
risk assessment and controls
• C) Full compliance with the National Electrical Code (NEC)
• D) Reduction of insurance premiums
Rationale: Article 110.1(A) explicitly states that the goal of the
ESP is the practical elimination of electrical hazards by means
of risk assessment and appropriate control measures.
3. Who bears ultimate responsibility for enforcing the Electrical
Safety Program?
• A) Each qualified person individually
• B) The safety manager only
• C) All employees collectively
• D) The employer (or a designated responsible person)
Rationale: 110.1(B) assigns final responsibility to the employer
or a specifically designated responsible person.
, Page 3 of 46
4. According to 110.1(H)(2), how often must the Electrical Safety
Program be audited?
• A) At intervals not to exceed 3 years
• B) Annually
• C) Only when an incident occurs
• D) At the discretion of the employer
Rationale: The ESP must be audited at regular intervals not
exceeding three years. The audit is performed by persons not
directly responsible for the day-to-day operation of the ESP.
5. According to NFPA 70E-2024, an "incident" is defined as:
• A) Any near-miss event
• B) An event resulting in death, injury, or damage to
property
• C) Any deviation from the safety program
• D) Any unplanned event
Rationale: Article 100 defines an incident as an event that
results in death, injury, or damage to property. "Near misses" are
events that could have resulted in an incident but did not.
6. Under 110.2, which of the following is required for "qualified
persons"?
• A) General safety training only
, Page 4 of 46
• B) Training specific to the task, voltage, and energy
exposure
• C) A 4-year engineering degree
• D) OSHA certification
Rationale: Article 110.2 requires that qualified persons be
trained and knowledgeable about the specific equipment and
hazards to which they will be exposed.
7. According to 110.2(F), how often must electrical safety
training be retrained?
• A) Annually
• B) At intervals not to exceed 3 years
• C) Only when equipment changes
• D) As determined solely by the employee
Rationale: Retraining must occur at intervals not to exceed three
years, or whenever employee performance indicates a need for
additional training.
8. The hierarchy of risk control methods, as referenced in 110.1,
places the highest priority on what control method?
• A) Elimination
• B) Substitution
• C) Engineering controls
• D) Personal Protective Equipment (PPE)
