Bolting Test #1 Questions With Correct
Answers
The special inspector shall furnish daily inspection reports to the
| | | | | | | | | |
_________ and ________ - CORRECT ANSWER✔✔-Building official and
| | | | | | | |
Registered design professional | |
According to the Specifications for Structural joints, how can high
| | | | | | | | | |
strength bolts and nuts be identified on a job site? - CORRECT
| | | | | | | | | | | |
ANSWER✔✔-Bolt and nut markings | | |
Who shall the special inspector demonstrate competence to? -
| | | | | | | | |
CORRECT ANSWER✔✔-Building Official
| |
Who is responsible for preparing the statement of special inspection? -
| | | | | | | | | | |
CORRECT ANSWER✔✔-Registered design professional
| | |
According to the Specifications for Structural Joints, where twist-off
| | | | | | | | |
tension control bolts are used, what field inspection is of primary
| | | | | | | | | | |
importance for joint strength? - CORRECT ANSWER✔✔-Bolt length
| | | | | | |
, The Special inspections required by this code are not required where
| | | | | | | | | | |
the work is done on the premises of a (an): - CORRECT ANSWER✔✔-
| | | | | | | | | | | |
Approved fabricator |
The type and extent of each special inspection shall be located in
| | | | | | | | | | | |
________ - CORRECT ANSWER✔✔-The statement of special inspection
| | | | | | |
When tension-control bolts are used, and F436 was her shall be used
| | | | | | | | | | | |
under the _______ - CORRECT ANSWER✔✔-Nut
| | | | |
Who can hire a special inspector? - CORRECT ANSWER✔✔-Owner's
| | | | | | | | |
agent
When discrepancies go uncorrected and a correction notice is issued,
| | | | | | | | | |
who must be notified? - CORRECT ANSWER✔✔-City inspector and
| | | | | | | | |
Registered design professional | |
Faying surfaces and surfaces adjacent to the bolt head and nut shall be
| | | | | | | | | | | | |
_____ - CORRECT ANSWER✔✔-Free of dirt and other foreign material
| | | | | | | | |
A bolted connection designed to resist movement by friction on the
| | | | | | | | | | |
faying surface of the connection under clamping forces of the bolts is
| | | | | | | | | | | |
what type of connection. - CORRECT ANSWER✔✔-Slip Critical
| | | | | | |
Answers
The special inspector shall furnish daily inspection reports to the
| | | | | | | | | |
_________ and ________ - CORRECT ANSWER✔✔-Building official and
| | | | | | | |
Registered design professional | |
According to the Specifications for Structural joints, how can high
| | | | | | | | | |
strength bolts and nuts be identified on a job site? - CORRECT
| | | | | | | | | | | |
ANSWER✔✔-Bolt and nut markings | | |
Who shall the special inspector demonstrate competence to? -
| | | | | | | | |
CORRECT ANSWER✔✔-Building Official
| |
Who is responsible for preparing the statement of special inspection? -
| | | | | | | | | | |
CORRECT ANSWER✔✔-Registered design professional
| | |
According to the Specifications for Structural Joints, where twist-off
| | | | | | | | |
tension control bolts are used, what field inspection is of primary
| | | | | | | | | | |
importance for joint strength? - CORRECT ANSWER✔✔-Bolt length
| | | | | | |
, The Special inspections required by this code are not required where
| | | | | | | | | | |
the work is done on the premises of a (an): - CORRECT ANSWER✔✔-
| | | | | | | | | | | |
Approved fabricator |
The type and extent of each special inspection shall be located in
| | | | | | | | | | | |
________ - CORRECT ANSWER✔✔-The statement of special inspection
| | | | | | |
When tension-control bolts are used, and F436 was her shall be used
| | | | | | | | | | | |
under the _______ - CORRECT ANSWER✔✔-Nut
| | | | |
Who can hire a special inspector? - CORRECT ANSWER✔✔-Owner's
| | | | | | | | |
agent
When discrepancies go uncorrected and a correction notice is issued,
| | | | | | | | | |
who must be notified? - CORRECT ANSWER✔✔-City inspector and
| | | | | | | | |
Registered design professional | |
Faying surfaces and surfaces adjacent to the bolt head and nut shall be
| | | | | | | | | | | | |
_____ - CORRECT ANSWER✔✔-Free of dirt and other foreign material
| | | | | | | | |
A bolted connection designed to resist movement by friction on the
| | | | | | | | | | |
faying surface of the connection under clamping forces of the bolts is
| | | | | | | | | | | |
what type of connection. - CORRECT ANSWER✔✔-Slip Critical
| | | | | | |
