VA HIC License Updated Exam 2026 WITH Recent Newest
Verified And Well Analyzed Exam Questions (Actual Exam
2026-2027) Correct Detailed & Verified ANSWERS (100%
Accurate Solutions) ALREADY GRADED A+||NEWEST
VERSION Of The Exam Guarantee Pass!!
What would be mixed into a concrete mixture to control the wear resistance and stability
of concrete? -ANSWERS-Water
What is the typical height of a regular base kitchen cabinet? -ANSWERS-34-1/2"
A roll roofing strip should have at least how many inches overlapping at the eave? -
ANSWERS-1/4"
Of the species commonly used in house construction, the heartwood of bald cypress,
redwood, and various cedars is highest in _______ resistance. -ANSWERS-Decay
Protruding objects may not protrude more than ___ inches into the path of travel. -
ANSWERS-4"
In new buildings, thresholds at doorways should be no higher than ______. -
ANSWERS-1/2"
In a Type A unit, if measuring to the highest part of the rim or highest part of the
counter, what is the maximum height of the sink front above the floor? -ANSWERS-34"
,The height of handrails shall be ____ minimum and ____ maximum vertically above
stair nosings, ramp and walking surfaces. -ANSWERS-34" minimum, 38" maximum
A hallway more than 24 inches long must have a clear width of ____. -ANSWERS-36"
Enter and proceed" is presented as a _____ on the raised touchable surface on a
function key." -ANSWERS-Circle
Operable parts shall be operable with one hand and shall not require: -ANSWERS-Tight
grasping, pinching, or twisting of the wrist.
In existing buildings and facilities, the clear width of a walking surface shall be permitted
to be reduced to ____ minimum for a length of 24 inches maximum. -ANSWERS-32
inches
The clear width of an exterior accessible route located within seating areas shall be ___
minimum. -ANSWERS-36 inches
The running slope of walking surfaces shall not be steeper than: -ANSWERS-1:20
,What components shall not be part of an accessible route? -ANSWERS-Revolving
doors & Turnstiles
The maximum height of existing elevator call buttons shall be permitted to be located
___ above the floor. -ANSWERS-54"
The maximum knee clearance shall be permitted to extend ____ under an element that
is 9" above the floor. -ANSWERS-25"
The brightness of the elevator car landing sill, threshold, platform and controls are to be
no less than _____ foot candles. -ANSWERS-5
What is the least diameter of grab bars with circular cross sections? -ANSWERS-1-1/4"
All hardware such as handles, locks, or any other operable parts shall be ____
minimum above the floor. -ANSWERS-34"
In new construction, what is the maximum slope of a ramp? -ANSWERS-0.05
In existing buildings and facilities, the turning space shall be a circular space with a ___
minimum diameter. -ANSWERS-60-inch
What is the minimum diameter of a circular turnaround area in a new building? -
ANSWERS-60"
, Doorways shall have a clear opening width of 32 inches minimum. Projections into the
clear opening width between 34 inches and 80 inches above the floor shall not exceed:
-ANSWERS-4 inches
What is the first step to placing a bifold door? -ANSWERS-Install the top track first
Glulams are sometimes manufactured with a slight upward curve known as ____? -
ANSWERS-Camber
When using a splash block to direct water from a down spout, how long should it be to
carry away water from the foundation? -ANSWERS-3'
How many bundles are usually in a square of 3-tab shingles? -ANSWERS-3
Before concrete is placed, what is commonly used to secure the sides of foundation wall
forms to prevent spreading? -ANSWERS-Snap ties
On a blueprint, what do lines that end with arrows represent? -ANSWERS-Dimension
lines
What should be placed with every second course when you are building a stack bond
pattern block wall? -ANSWERS-Joint reinforcement
Verified And Well Analyzed Exam Questions (Actual Exam
2026-2027) Correct Detailed & Verified ANSWERS (100%
Accurate Solutions) ALREADY GRADED A+||NEWEST
VERSION Of The Exam Guarantee Pass!!
What would be mixed into a concrete mixture to control the wear resistance and stability
of concrete? -ANSWERS-Water
What is the typical height of a regular base kitchen cabinet? -ANSWERS-34-1/2"
A roll roofing strip should have at least how many inches overlapping at the eave? -
ANSWERS-1/4"
Of the species commonly used in house construction, the heartwood of bald cypress,
redwood, and various cedars is highest in _______ resistance. -ANSWERS-Decay
Protruding objects may not protrude more than ___ inches into the path of travel. -
ANSWERS-4"
In new buildings, thresholds at doorways should be no higher than ______. -
ANSWERS-1/2"
In a Type A unit, if measuring to the highest part of the rim or highest part of the
counter, what is the maximum height of the sink front above the floor? -ANSWERS-34"
,The height of handrails shall be ____ minimum and ____ maximum vertically above
stair nosings, ramp and walking surfaces. -ANSWERS-34" minimum, 38" maximum
A hallway more than 24 inches long must have a clear width of ____. -ANSWERS-36"
Enter and proceed" is presented as a _____ on the raised touchable surface on a
function key." -ANSWERS-Circle
Operable parts shall be operable with one hand and shall not require: -ANSWERS-Tight
grasping, pinching, or twisting of the wrist.
In existing buildings and facilities, the clear width of a walking surface shall be permitted
to be reduced to ____ minimum for a length of 24 inches maximum. -ANSWERS-32
inches
The clear width of an exterior accessible route located within seating areas shall be ___
minimum. -ANSWERS-36 inches
The running slope of walking surfaces shall not be steeper than: -ANSWERS-1:20
,What components shall not be part of an accessible route? -ANSWERS-Revolving
doors & Turnstiles
The maximum height of existing elevator call buttons shall be permitted to be located
___ above the floor. -ANSWERS-54"
The maximum knee clearance shall be permitted to extend ____ under an element that
is 9" above the floor. -ANSWERS-25"
The brightness of the elevator car landing sill, threshold, platform and controls are to be
no less than _____ foot candles. -ANSWERS-5
What is the least diameter of grab bars with circular cross sections? -ANSWERS-1-1/4"
All hardware such as handles, locks, or any other operable parts shall be ____
minimum above the floor. -ANSWERS-34"
In new construction, what is the maximum slope of a ramp? -ANSWERS-0.05
In existing buildings and facilities, the turning space shall be a circular space with a ___
minimum diameter. -ANSWERS-60-inch
What is the minimum diameter of a circular turnaround area in a new building? -
ANSWERS-60"
, Doorways shall have a clear opening width of 32 inches minimum. Projections into the
clear opening width between 34 inches and 80 inches above the floor shall not exceed:
-ANSWERS-4 inches
What is the first step to placing a bifold door? -ANSWERS-Install the top track first
Glulams are sometimes manufactured with a slight upward curve known as ____? -
ANSWERS-Camber
When using a splash block to direct water from a down spout, how long should it be to
carry away water from the foundation? -ANSWERS-3'
How many bundles are usually in a square of 3-tab shingles? -ANSWERS-3
Before concrete is placed, what is commonly used to secure the sides of foundation wall
forms to prevent spreading? -ANSWERS-Snap ties
On a blueprint, what do lines that end with arrows represent? -ANSWERS-Dimension
lines
What should be placed with every second course when you are building a stack bond
pattern block wall? -ANSWERS-Joint reinforcement
