ICA School Test | Questions with 100%
Correct Answers | Verified | Latest Update
2026/2027
Save
Terms in this set (100)
CCST is: Corrugated Stainless Steel Tubing
Continuous Structural Steel
Tubing
Copper Shielded Steel Tubing
Corrugated Stainless Steel
Tubing
Corrugated Shielded
Structural Tubing
,The Standards of Practice for Defines what is and what is not included
home inspections: in a standard home inspection
Defines optional services that
home inspectors may provide.
Provides a business model for
starting a home inspection
company.
Defines the curriculum for a
home inspection training
program.
Defines what is and what is not
included in a standard home
inspection.
The inspector is NOT required Operate main shut-off valves
to:
Operate all plumbing fixtures.
Observe functional flow.
Describe water heating
equipment.
Operate main shut-off valves.
,What is flashing? Material that covers exposed edges of
roofing where it meets chimneys or
Material that covers exposed sidewalls to prevent water intrusion
edges of roofing where it
meets chimneys or sidewalls to
prevent water intrusion.
Flames jumping back and forth
from the burners into the
combustion area of a furnace.
The material used to hold
bricks together.
Wiring that has been subject
to excessive heat.
What deficiency would cause Crack in the heat exchanger
the replacement of a forced-
air gas furnace?
Leak in the flue pipe.
Crack in the heat exchange.r
Failure to the blower motor.
Banging noise in the duct
work.
, Blisters and bubbles on a built- That there is moisture trapped between
up roof usually indicate: the felt-piles
That there is moisture trapped
between the felt-plies.
That the gravel needs to be
replaced.
Lack of proper ventilation in
the attic.
Chimney flashing problems.
The standards of practice: Help to limit the liability of a home
inspector
Help to limit the liability of a
home inspector.
Should always be followed to
the letter.
Refer to all properties and
property types.
Are revised according to the
needs of the client.
What is the minimum clearance 6"
from combustibles for a single
wall furnace vent?
18"
9"
6"
8"
Correct Answers | Verified | Latest Update
2026/2027
Save
Terms in this set (100)
CCST is: Corrugated Stainless Steel Tubing
Continuous Structural Steel
Tubing
Copper Shielded Steel Tubing
Corrugated Stainless Steel
Tubing
Corrugated Shielded
Structural Tubing
,The Standards of Practice for Defines what is and what is not included
home inspections: in a standard home inspection
Defines optional services that
home inspectors may provide.
Provides a business model for
starting a home inspection
company.
Defines the curriculum for a
home inspection training
program.
Defines what is and what is not
included in a standard home
inspection.
The inspector is NOT required Operate main shut-off valves
to:
Operate all plumbing fixtures.
Observe functional flow.
Describe water heating
equipment.
Operate main shut-off valves.
,What is flashing? Material that covers exposed edges of
roofing where it meets chimneys or
Material that covers exposed sidewalls to prevent water intrusion
edges of roofing where it
meets chimneys or sidewalls to
prevent water intrusion.
Flames jumping back and forth
from the burners into the
combustion area of a furnace.
The material used to hold
bricks together.
Wiring that has been subject
to excessive heat.
What deficiency would cause Crack in the heat exchanger
the replacement of a forced-
air gas furnace?
Leak in the flue pipe.
Crack in the heat exchange.r
Failure to the blower motor.
Banging noise in the duct
work.
, Blisters and bubbles on a built- That there is moisture trapped between
up roof usually indicate: the felt-piles
That there is moisture trapped
between the felt-plies.
That the gravel needs to be
replaced.
Lack of proper ventilation in
the attic.
Chimney flashing problems.
The standards of practice: Help to limit the liability of a home
inspector
Help to limit the liability of a
home inspector.
Should always be followed to
the letter.
Refer to all properties and
property types.
Are revised according to the
needs of the client.
What is the minimum clearance 6"
from combustibles for a single
wall furnace vent?
18"
9"
6"
8"
