SNSP Exam - Best Practices and other Basics |
85 Questions and Answers(A+ Solution guide)
Save
Terms in this set (85)
Which interfaces cannot be X0 and MGMT
configured as WAN interfaces
What is the default configuration of Static mode with IP of 0.0.0.0
X1
To avoid routing issues of X1 what It's assigned with a valid non-zero IP address or
should you ensure configuring for DHCP or PPPoE
True or False: It is recommended to True - Unassigned
disassociate the from the WAN
zone if not in use
, True or False: You should open False
HTTPS Mgmt up on the WAN
interface
True or False: Check the "Add rule False
to enable redirect from HTTP to
HTTPS" option when configuring
HTTPM management
What can result from incorrect Inconsistent Internet connection, slow
duplex settings on the WAN throughput, dropped packets, and inability to
negotiate to an ISP connection
What settings are default on the Link Speed to Auto Negotiate
advanced tab of a WAN interface User Default MAC address
Enable Flow Reporting
Fragment non-VPN outbound packets larger than
this Interfaces MTU
MTU stands for what Maximum Transmission Unit
On DSL and cable connections is Lower
the MTU size generally lower or
higher
How do you change the value of In increments of 8 bytes
MTU
True or False: Confirm that Ignore True
Don't Fragment DF bit is unchecked
85 Questions and Answers(A+ Solution guide)
Save
Terms in this set (85)
Which interfaces cannot be X0 and MGMT
configured as WAN interfaces
What is the default configuration of Static mode with IP of 0.0.0.0
X1
To avoid routing issues of X1 what It's assigned with a valid non-zero IP address or
should you ensure configuring for DHCP or PPPoE
True or False: It is recommended to True - Unassigned
disassociate the from the WAN
zone if not in use
, True or False: You should open False
HTTPS Mgmt up on the WAN
interface
True or False: Check the "Add rule False
to enable redirect from HTTP to
HTTPS" option when configuring
HTTPM management
What can result from incorrect Inconsistent Internet connection, slow
duplex settings on the WAN throughput, dropped packets, and inability to
negotiate to an ISP connection
What settings are default on the Link Speed to Auto Negotiate
advanced tab of a WAN interface User Default MAC address
Enable Flow Reporting
Fragment non-VPN outbound packets larger than
this Interfaces MTU
MTU stands for what Maximum Transmission Unit
On DSL and cable connections is Lower
the MTU size generally lower or
higher
How do you change the value of In increments of 8 bytes
MTU
True or False: Confirm that Ignore True
Don't Fragment DF bit is unchecked
