CWB 47.1 2026/2027 ACTUAL QUESTIONS WITH VERIFIED ANSWERS.

CWB 47.1 2026/2027 ACTUAL
QUESTIONS WITH VERIFIED
ANSWERS.

Welding on galvanized surfaces requires a separate
qualification.
True or false? - correct answer-True




Electrodes used for welding personnel qualification tests shall
be certified by the Canadian welding bureau as conforming to
the requirements of the latest edition of CSA Standard W48 or
the appropriate AWS A5 series of standards
True or false? - correct answer-True




What type of identification card is issued by the Canadian
welding bureau to welders who qualify for the vertical down
process of welding ?
A) transferable
B) nontransferable
C) letter
D) no card is issued because the welder did not qualify on a
standard test assembly - correct answer-A

, In what position must a welder be tested in order to qualify for
FW classification, class 0?
A) 1F
B) 1F, 2F
C) 2F, 3F, 4F
D) 1F, 2F, 3F, 4F - correct answer-C




What is the max fillet weld size that can be deposited on a FW
qualification test assembly?
A) 3 mm
B) 5 mm
C) 6 mm
D) 8 mm - correct answer-D




What portion of a standard SMAW welders test plate assembly
is radiographers if radiography is used to assess the welders
test?
A) all 150 mm (6 in) of weld
B) centre 75 mm (3 in) of weld
C) centre 115 mm (4-1/2 in) of weld