NEIEP 800 Final Exam | Questions and Answers |
Verified Solutions | 2026 Edition | Pass
Guaranteed
Save
Practice questions for this set
Learn 1 /7 Study using Learn
pump belts
Choose an answer
1 Hydro elevators in low rise applications do not need an _____ _____ room.
If a hydraulic elevator trips its low oil timer what should you check if the oil level is
2
good?
As the oil temperature changes, the _____ will change as well and will effect the
3
performance, more specifically, the leveling and approach of the elevator.
When welding a joint, lay _____ inch tack welds _____ degrees apart, shift it 90 degrees and
4
lay two more 1 inch tack welds 180 degrees apart.
, Don't know?
Terms in this set (90)
Hydro elevators in low rise overhead machine
applications do not need an _____ _____
room.
Some advantages of hydros are ground, building structure
lower equipment and building
construction costs because the load
of a hydro is carried to the _____
where as the load of a traction car is
carried by the _____ _____.
When drilling the jack hole, the only Spider Bob
proper way to determine if the hole
is plumb is to remove the drill stem
and bit and use a _____ _____.
To plumb the hole, a spider bob is Hoistway
attached to a length of piano wire
suspended from as near as possible
to the top of the _____ or from a fixed
point on the drill rig.
When welding a joint, lay _____ inch 1, 180
tack welds _____ degrees apart, shift it
90 degrees and lay two more 1 inch
tack welds 180 degrees apart.
Verified Solutions | 2026 Edition | Pass
Guaranteed
Save
Practice questions for this set
Learn 1 /7 Study using Learn
pump belts
Choose an answer
1 Hydro elevators in low rise applications do not need an _____ _____ room.
If a hydraulic elevator trips its low oil timer what should you check if the oil level is
2
good?
As the oil temperature changes, the _____ will change as well and will effect the
3
performance, more specifically, the leveling and approach of the elevator.
When welding a joint, lay _____ inch tack welds _____ degrees apart, shift it 90 degrees and
4
lay two more 1 inch tack welds 180 degrees apart.
, Don't know?
Terms in this set (90)
Hydro elevators in low rise overhead machine
applications do not need an _____ _____
room.
Some advantages of hydros are ground, building structure
lower equipment and building
construction costs because the load
of a hydro is carried to the _____
where as the load of a traction car is
carried by the _____ _____.
When drilling the jack hole, the only Spider Bob
proper way to determine if the hole
is plumb is to remove the drill stem
and bit and use a _____ _____.
To plumb the hole, a spider bob is Hoistway
attached to a length of piano wire
suspended from as near as possible
to the top of the _____ or from a fixed
point on the drill rig.
When welding a joint, lay _____ inch 1, 180
tack welds _____ degrees apart, shift it
90 degrees and lay two more 1 inch
tack welds 180 degrees apart.
