CCNA OSI & TCP(IP) MODEL
QUESTIONS & ACTUAL ANSWERS
RATED 100% CORRECT
Where does routing occur within the DoD TCP/IP reference model?
A. application
B. internet
C. network
D. transport - Correct Answer ✔✔ *Answer B
Refer to exhibit.
"Router#show running-config
Building configuration...
Current configuration : 659 bytes
!
version 12.4
no service timestamps log datetime msec
no service timestamps debug datetime msec
service password-encryption ! hostname Router
!
enable secret 5 $ $mERr$hx5rVt7rPNoS4wqbXKX7m0
!
interface FastEthernet0/0
ip address 192.168.1.1 255.255.255.0
ip access-group 101 in duplex auto speed auto
!
access-1ist 101 deny tcp any any eq 22
access-1ist 101 permit ip any any
!
line con 0 password 7 0822455D0A16
login
line vty 0 4 login
line vty 5 14 login
!
end"
A network administrator cannot establish a Telnet session with the indicated router.
What is the cause of this failure?
QUESTIONS & ACTUAL ANSWERS
RATED 100% CORRECT
Where does routing occur within the DoD TCP/IP reference model?
A. application
B. internet
C. network
D. transport - Correct Answer ✔✔ *Answer B
Refer to exhibit.
"Router#show running-config
Building configuration...
Current configuration : 659 bytes
!
version 12.4
no service timestamps log datetime msec
no service timestamps debug datetime msec
service password-encryption ! hostname Router
!
enable secret 5 $ $mERr$hx5rVt7rPNoS4wqbXKX7m0
!
interface FastEthernet0/0
ip address 192.168.1.1 255.255.255.0
ip access-group 101 in duplex auto speed auto
!
access-1ist 101 deny tcp any any eq 22
access-1ist 101 permit ip any any
!
line con 0 password 7 0822455D0A16
login
line vty 0 4 login
line vty 5 14 login
!
end"
A network administrator cannot establish a Telnet session with the indicated router.
What is the cause of this failure?
