Missouri Boating license Exam study guide COMPLETE EXAM Questions
anAnswers (Verified Answers) (Latest Update 2025) UPDATE!!
Bow - (ANSWER)Front of the vessel.
Stern - (ANSWER)Rear of the vessel.
Starboard - (ANSWER)Right side of the vessel.
Port - (ANSWER)Left side of the vessel.
Hull - (ANSWER)Body of the vessel.
Gunwale - (ANSWER)Upper edge of vessel's side.
Cleat - (ANSWER)Metal fitting on which a rope can be fastened.
Propeller - (ANSWER)Rotates and powers a boat forward or backward.
Beam - (ANSWER)Maximum width of a vessel.
Freeboard - (ANSWER)Distance from water to lowest point of the boat where water could come on
board.
Draft - (ANSWER)Depth of the water needed to float a vessel.
Keel - (ANSWER)Main centerline (backbone) of a vessel or the extension of hull that increases stability in
the water.
Hull - (ANSWER)Body of a vessel; basic structure or shell.
,Missouri Boating license Exam study guide COMPLETE EXAM Questions
anAnswers (Verified Answers) (Latest Update 2025) UPDATE!!
Personal watercraft - (ANSWER)A small vessel that uses an inboard jet drive as its primary source of
propulsion, and is designed to be operated by a person or persons sitting, standing, or kneeling on the
vessel rather than inside the vessel.
Displacement Mode - (ANSWER)A planing hull, when operated at very slow speeds, will cut through the
water like a displacement hull.
Plowing Mode - (ANSWER)As speed increases, a planing hull will have a raised bow, reducing the
operator's vision and throwing a very large wake. Avoid maintaining a speed that puts your boat in
plowing mode.
Planing Mode - (ANSWER)Your boat is in planing mode when enough power is applied so that the hull
glides on top of the water. Different boats reach planing mode at different speeds.
Bow - (ANSWER)Front of a vessel.
Length overall - (ANSWER)Length of the hull excluding any attachments.
Rudder - (ANSWER)Steering device, usually a vertical blade attached to a post at, or near, the stern of
the boat.
Stern - (ANSWER)Rear of a vessel
Flat Bottom Hull Advantages - (ANSWER)This planing hull has a shallow draft, which is good for fishing in
small lakes and rivers.
Deep Vee Hull Advantages - (ANSWER)This planing hull gives a smoother ride than a flat bottom hull in
rough water.
,Missouri Boating license Exam study guide COMPLETE EXAM Questions
anAnswers (Verified Answers) (Latest Update 2025) UPDATE!!
Round Bottom Hull Advantages - (ANSWER)This typical displacement hull moves easily through the
water even at slow speeds.
Multi Hull Advantages - (ANSWER)Another example of a displacement hull, the multi-hull has greater
stability because of its wide beam.
Flat Bottom Hull Disadvantages - (ANSWER)Rides roughly and choppy in the waters.
Deep Vee Hull Disadvantages - (ANSWER)Takes more power to move at the same speed as flat bottom
hulls. May roll or bank in sharp turns.
Round Bottom Hull Disadvantages - (ANSWER)Has a tendency to roll unless it has a deep keel or
stabilizers.
Multi Hull Disadvantages - (ANSWER)Needs a large area when turning.
Class A - (ANSWER)Less than 16 feet.
Class 1 - (ANSWER)16 feet less than 26 feet.
Class 2 - (ANSWER)26 feet less than 40 feet.
Class 3 - (ANSWER)40 feet to less than 65 feet.
Propeller - (ANSWER)Rotating device that turns and powers a boat forward or backward.
Tiller - (ANSWER)Lever used to turn a rudder to steer a boat.
, Missouri Boating license Exam study guide COMPLETE EXAM Questions
anAnswers (Verified Answers) (Latest Update 2025) UPDATE!!
Transform - (ANSWER)Vertical surface at the back of the hull.
Steering Control - (ANSWER)Means of controlling the steering nozzle.
Safety Lanyard - (ANSWER)Short cord for attaching the ignition safety switch to the operators wrist or
personal life vest.
Throttle - (ANSWER)Lever.
Starboard - (ANSWER)Right side.
Port - (ANSWER)Left side.
Fuel cap - (ANSWER)Where you put gas in on the left side of the seadoo.
Draft - (ANSWER)Depth of water needed to float a vessel.
Intake - (ANSWER)Opening in the hull that draws water toward the impeller.
Intake grate - (ANSWER)Screening cover over the intake, which prevents large debris from entering.
Drive shaft - (ANSWER)The long stem connection between the motor and the impeller.
Impeller - (ANSWER)Device used to pump and force water under pressure through a steering nozzle at
the rear of the vessel.
Steering nozzle - (ANSWER)Device used for directing the stream of water to the left or right at the stern
of the PWC, which steers the PWC
anAnswers (Verified Answers) (Latest Update 2025) UPDATE!!
Bow - (ANSWER)Front of the vessel.
Stern - (ANSWER)Rear of the vessel.
Starboard - (ANSWER)Right side of the vessel.
Port - (ANSWER)Left side of the vessel.
Hull - (ANSWER)Body of the vessel.
Gunwale - (ANSWER)Upper edge of vessel's side.
Cleat - (ANSWER)Metal fitting on which a rope can be fastened.
Propeller - (ANSWER)Rotates and powers a boat forward or backward.
Beam - (ANSWER)Maximum width of a vessel.
Freeboard - (ANSWER)Distance from water to lowest point of the boat where water could come on
board.
Draft - (ANSWER)Depth of the water needed to float a vessel.
Keel - (ANSWER)Main centerline (backbone) of a vessel or the extension of hull that increases stability in
the water.
Hull - (ANSWER)Body of a vessel; basic structure or shell.
,Missouri Boating license Exam study guide COMPLETE EXAM Questions
anAnswers (Verified Answers) (Latest Update 2025) UPDATE!!
Personal watercraft - (ANSWER)A small vessel that uses an inboard jet drive as its primary source of
propulsion, and is designed to be operated by a person or persons sitting, standing, or kneeling on the
vessel rather than inside the vessel.
Displacement Mode - (ANSWER)A planing hull, when operated at very slow speeds, will cut through the
water like a displacement hull.
Plowing Mode - (ANSWER)As speed increases, a planing hull will have a raised bow, reducing the
operator's vision and throwing a very large wake. Avoid maintaining a speed that puts your boat in
plowing mode.
Planing Mode - (ANSWER)Your boat is in planing mode when enough power is applied so that the hull
glides on top of the water. Different boats reach planing mode at different speeds.
Bow - (ANSWER)Front of a vessel.
Length overall - (ANSWER)Length of the hull excluding any attachments.
Rudder - (ANSWER)Steering device, usually a vertical blade attached to a post at, or near, the stern of
the boat.
Stern - (ANSWER)Rear of a vessel
Flat Bottom Hull Advantages - (ANSWER)This planing hull has a shallow draft, which is good for fishing in
small lakes and rivers.
Deep Vee Hull Advantages - (ANSWER)This planing hull gives a smoother ride than a flat bottom hull in
rough water.
,Missouri Boating license Exam study guide COMPLETE EXAM Questions
anAnswers (Verified Answers) (Latest Update 2025) UPDATE!!
Round Bottom Hull Advantages - (ANSWER)This typical displacement hull moves easily through the
water even at slow speeds.
Multi Hull Advantages - (ANSWER)Another example of a displacement hull, the multi-hull has greater
stability because of its wide beam.
Flat Bottom Hull Disadvantages - (ANSWER)Rides roughly and choppy in the waters.
Deep Vee Hull Disadvantages - (ANSWER)Takes more power to move at the same speed as flat bottom
hulls. May roll or bank in sharp turns.
Round Bottom Hull Disadvantages - (ANSWER)Has a tendency to roll unless it has a deep keel or
stabilizers.
Multi Hull Disadvantages - (ANSWER)Needs a large area when turning.
Class A - (ANSWER)Less than 16 feet.
Class 1 - (ANSWER)16 feet less than 26 feet.
Class 2 - (ANSWER)26 feet less than 40 feet.
Class 3 - (ANSWER)40 feet to less than 65 feet.
Propeller - (ANSWER)Rotating device that turns and powers a boat forward or backward.
Tiller - (ANSWER)Lever used to turn a rudder to steer a boat.
, Missouri Boating license Exam study guide COMPLETE EXAM Questions
anAnswers (Verified Answers) (Latest Update 2025) UPDATE!!
Transform - (ANSWER)Vertical surface at the back of the hull.
Steering Control - (ANSWER)Means of controlling the steering nozzle.
Safety Lanyard - (ANSWER)Short cord for attaching the ignition safety switch to the operators wrist or
personal life vest.
Throttle - (ANSWER)Lever.
Starboard - (ANSWER)Right side.
Port - (ANSWER)Left side.
Fuel cap - (ANSWER)Where you put gas in on the left side of the seadoo.
Draft - (ANSWER)Depth of water needed to float a vessel.
Intake - (ANSWER)Opening in the hull that draws water toward the impeller.
Intake grate - (ANSWER)Screening cover over the intake, which prevents large debris from entering.
Drive shaft - (ANSWER)The long stem connection between the motor and the impeller.
Impeller - (ANSWER)Device used to pump and force water under pressure through a steering nozzle at
the rear of the vessel.
Steering nozzle - (ANSWER)Device used for directing the stream of water to the left or right at the stern
of the PWC, which steers the PWC
