OSHA 510 EXAM NEWEST EXAM 2026 | COMPLETE QUESTIONS AND CORRECT
ANSWERS | GRADED A+ | LATEST EXAM | VERIFIED ANSWERS
Question 1
What does the acronym OSHA stand for?
A) Occupational Safety and Hazard Association
B) Organization for Safety and Health Administration
C) Occupational Safety and Health Administration
D) Office of Safety and Health Awareness
E) Occupational Standards for Health Association
Correct Answer: C) Occupational Safety and Health Administration
Rationale: OSHA is a federal agency under the United States Department of Labor,
established to ensure safe and healthful working conditions by setting and enforcing
standards and by providing training, outreach, education, and assistance.
Question 2
OSHA was signed into law by which U.S. President?
A) Lyndon B. Johnson
B) Gerald Ford
C) Jimmy Carter
D) Richard Nixon
E) Ronald Reagan
Correct Answer: D) Richard Nixon
Rationale: President Richard Nixon signed the Occupational Safety and Health Act on
December 29, 1970, which led to the official formation of OSHA in 1971.
Question 3
In what year was the OSHA Act signed into law?
A) 1935
B) 1960
C) 1970
D) 1982
E) 1991
Correct Answer: C) 1970
Rationale: OSHA was officially formed following the passage of the OSH Act of 1970 to
address the increasing rates of workplace injuries and illnesses.
Question 4
What is the primary mission of OSHA?
A) To collect taxes from corporations
B) To save lives and prevent injuries
C) To provide health insurance for all workers
D) To manage union negotiations
, 2
E) To promote offshore drilling safety only
Correct Answer: B) To save lives and prevent injuries
Rationale: The core purpose of OSHA is to ensure that employers provide a workplace free
from recognized hazards that cause or are likely to cause death or serious physical harm.
Question 5
What is OSHA’s primary method of enforcement of safety regulations?
A) Peer reviews
B) Voluntary compliance programs
C) Worksite inspections
D) Online webinars
E) Grant writing
Correct Answer: C) Worksite inspections
Rationale: OSHA enforces its standards through unannounced worksite inspections
conducted by Compliance Safety and Health Officers (CSHOs) to identify and penalize
safety violations.
Question 6
Which of the following is NOT one of OSHA’s "Focus Four" injuries?
A) Falls
B) Caught-in
C) Struck-by
D) Electrical
E) Repetitive Stress
Correct Answer: E) Repetitive Stress
Rationale: The "Focus Four" represent the most common causes of fatalities in
construction: Falls, Struck-by, Caught-in (or between), and Electrical hazards.
Question 7
According to OSHA's inspection priorities, which of the following is the highest priority?
A) Follow-up inspections
B) Worker complaints
C) Imminent danger
D) Fatality or hospitalization
E) Targeted inspections
Correct Answer: C) Imminent danger
Rationale: OSHA prioritizes situations where there is a reasonable certainty that a danger
exists that can be expected to cause death or serious physical harm immediately.
Question 8
What is the second highest priority for an OSHA inspection?
, 3
A) Targeted inspections
B) Worker referrals
C) Fatalities or hospitalizations
D) Planned inspections
E) Programmed inspections
Correct Answer: C) Fatalities or hospitalizations
Rationale: After imminent danger, OSHA prioritizes the investigation of accidents that lead
to a fatality or the hospitalization of one or more employees.
Question 9
OSHA standards are found in which title of the Code of Federal Regulations (CFR)?
A) Title 10
B) Title 21
C) Title 29
D) Title 40
E) Title 49
Correct Answer: C) Title 29
Rationale: All labor-related regulations, including OSHA standards, are housed under Title
29 of the CFR.
Question 10
Which part of the 29 CFR contains the standards for Record Keeping?
A) Part 1903
B) Part 1904
C) Part 1910
D) Part 1926
E) Part 1915
Correct Answer: B) Part 1904
Rationale: Part 1904 mandates how employers must record and report occupational injuries
and illnesses.
Question 11
Which part of the 29 CFR contains the standards for the Construction Industry?
A) Part 1910
B) Part 1915
C) Part 1926
D) Part 1928
E) Part 1904
Correct Answer: C) Part 1926
Rationale: Part 1926 is specifically dedicated to safety and health regulations for
construction work, which is the focus of the OSHA 510 course.
, 4
Question 12
Which part of the 29 CFR contains General Industry standards?
A) Part 1910
B) Part 1926
C) Part 1904
D) Part 1917
E) Part 1918
Correct Answer: A) Part 1910
Rationale: Part 1910 covers the vast majority of workplaces in the United States that are
not specifically covered by construction, maritime, or agricultural standards.
Question 13
What type of standard applies to all industries?
A) Vertical Standard
B) Lateral Standard
C) Horizontal Standard
D) Diagonal Standard
E) Universal Standard
Correct Answer: C) Horizontal Standard
Rationale: Horizontal standards are general and apply to any employer in any industry,
such as Hazard Communication or First Aid standards.
Question 14
What type of standard applies only to a specific industry or operation?
A) Vertical Standard
B) General Standard
C) Horizontal Standard
D) Industry-wide Standard
E) Cross-platform Standard
Correct Answer: A) Vertical Standard
Rationale: Vertical standards are specific to a particular industry, such as the construction
(1926) or maritime (1915) standards.
Question 15
A "Willful" violation can carry a fine up to what amount (based on the provided text)?
A) $13,494
B) $50,000
C) $134,937
D) $250,000
E)
ANSWERS | GRADED A+ | LATEST EXAM | VERIFIED ANSWERS
Question 1
What does the acronym OSHA stand for?
A) Occupational Safety and Hazard Association
B) Organization for Safety and Health Administration
C) Occupational Safety and Health Administration
D) Office of Safety and Health Awareness
E) Occupational Standards for Health Association
Correct Answer: C) Occupational Safety and Health Administration
Rationale: OSHA is a federal agency under the United States Department of Labor,
established to ensure safe and healthful working conditions by setting and enforcing
standards and by providing training, outreach, education, and assistance.
Question 2
OSHA was signed into law by which U.S. President?
A) Lyndon B. Johnson
B) Gerald Ford
C) Jimmy Carter
D) Richard Nixon
E) Ronald Reagan
Correct Answer: D) Richard Nixon
Rationale: President Richard Nixon signed the Occupational Safety and Health Act on
December 29, 1970, which led to the official formation of OSHA in 1971.
Question 3
In what year was the OSHA Act signed into law?
A) 1935
B) 1960
C) 1970
D) 1982
E) 1991
Correct Answer: C) 1970
Rationale: OSHA was officially formed following the passage of the OSH Act of 1970 to
address the increasing rates of workplace injuries and illnesses.
Question 4
What is the primary mission of OSHA?
A) To collect taxes from corporations
B) To save lives and prevent injuries
C) To provide health insurance for all workers
D) To manage union negotiations
, 2
E) To promote offshore drilling safety only
Correct Answer: B) To save lives and prevent injuries
Rationale: The core purpose of OSHA is to ensure that employers provide a workplace free
from recognized hazards that cause or are likely to cause death or serious physical harm.
Question 5
What is OSHA’s primary method of enforcement of safety regulations?
A) Peer reviews
B) Voluntary compliance programs
C) Worksite inspections
D) Online webinars
E) Grant writing
Correct Answer: C) Worksite inspections
Rationale: OSHA enforces its standards through unannounced worksite inspections
conducted by Compliance Safety and Health Officers (CSHOs) to identify and penalize
safety violations.
Question 6
Which of the following is NOT one of OSHA’s "Focus Four" injuries?
A) Falls
B) Caught-in
C) Struck-by
D) Electrical
E) Repetitive Stress
Correct Answer: E) Repetitive Stress
Rationale: The "Focus Four" represent the most common causes of fatalities in
construction: Falls, Struck-by, Caught-in (or between), and Electrical hazards.
Question 7
According to OSHA's inspection priorities, which of the following is the highest priority?
A) Follow-up inspections
B) Worker complaints
C) Imminent danger
D) Fatality or hospitalization
E) Targeted inspections
Correct Answer: C) Imminent danger
Rationale: OSHA prioritizes situations where there is a reasonable certainty that a danger
exists that can be expected to cause death or serious physical harm immediately.
Question 8
What is the second highest priority for an OSHA inspection?
, 3
A) Targeted inspections
B) Worker referrals
C) Fatalities or hospitalizations
D) Planned inspections
E) Programmed inspections
Correct Answer: C) Fatalities or hospitalizations
Rationale: After imminent danger, OSHA prioritizes the investigation of accidents that lead
to a fatality or the hospitalization of one or more employees.
Question 9
OSHA standards are found in which title of the Code of Federal Regulations (CFR)?
A) Title 10
B) Title 21
C) Title 29
D) Title 40
E) Title 49
Correct Answer: C) Title 29
Rationale: All labor-related regulations, including OSHA standards, are housed under Title
29 of the CFR.
Question 10
Which part of the 29 CFR contains the standards for Record Keeping?
A) Part 1903
B) Part 1904
C) Part 1910
D) Part 1926
E) Part 1915
Correct Answer: B) Part 1904
Rationale: Part 1904 mandates how employers must record and report occupational injuries
and illnesses.
Question 11
Which part of the 29 CFR contains the standards for the Construction Industry?
A) Part 1910
B) Part 1915
C) Part 1926
D) Part 1928
E) Part 1904
Correct Answer: C) Part 1926
Rationale: Part 1926 is specifically dedicated to safety and health regulations for
construction work, which is the focus of the OSHA 510 course.
, 4
Question 12
Which part of the 29 CFR contains General Industry standards?
A) Part 1910
B) Part 1926
C) Part 1904
D) Part 1917
E) Part 1918
Correct Answer: A) Part 1910
Rationale: Part 1910 covers the vast majority of workplaces in the United States that are
not specifically covered by construction, maritime, or agricultural standards.
Question 13
What type of standard applies to all industries?
A) Vertical Standard
B) Lateral Standard
C) Horizontal Standard
D) Diagonal Standard
E) Universal Standard
Correct Answer: C) Horizontal Standard
Rationale: Horizontal standards are general and apply to any employer in any industry,
such as Hazard Communication or First Aid standards.
Question 14
What type of standard applies only to a specific industry or operation?
A) Vertical Standard
B) General Standard
C) Horizontal Standard
D) Industry-wide Standard
E) Cross-platform Standard
Correct Answer: A) Vertical Standard
Rationale: Vertical standards are specific to a particular industry, such as the construction
(1926) or maritime (1915) standards.
Question 15
A "Willful" violation can carry a fine up to what amount (based on the provided text)?
A) $13,494
B) $50,000
C) $134,937
D) $250,000
E)
