WATER DISTRIBUTION 4 COMPLETE QUESTIONS AND
CORRECT ANSWERS | GRADED A+ | VERIFIED ANSWERS |
BRAND NEW VERSION!
How are valves checked to determine that they are holding properly?
Correct Answers by a pressure test
Who is ultimately responsible for being sure that your agency has a good
record keeping system? Correct Answers Supervisor
Which type of pipe is most likely to be damaged by corrosion? Correct
Answers Steel
What is the most important and all inclusive aspect of supervision?
Correct Answers proper utilization of all resources
The maxium flow to be expected through a standard 5/8 x 3/4 meter is
____ gpm. Correct Answers 20 gpm
What does not materially affect the friction loss in a given length of
pipe? Correct Answers hardness of water
Because of local climate conditions, a system may have a specific type
of fire hydrants installed, such as Correct Answers dry barrel or wet
barrel
, One opening has become available that would be an advancement to any
one of three qualified eager employee. How should this situation be
handled? Correct Answers Talk to all three as a group, explain the
situation, and make your selection. Then notify all personnel of the
change.
A decrease in the gallons of pumped a well per kilowatt hour of
electricity used indicates a... Correct Answers decrease in well
efficiency
Objectives for a preventive maintenance program include... Correct
Answers reduce emergency repairs and maintenance
Which one of the following ins unlikely to occur in the distribution
system? Correct Answers increase in dissolved gasses
To be sure a dry barrel hydrant is draining after the test is completed...
Correct Answers feel for a suction through the nozzle
Air tanks on storage tanks require... Correct Answers mesh screens to
prevent entry of animals or birds
In a parallel circuit, if one unit is burned out or disconnected, the other
units will... Correct Answers continue to function
Automation of a water system should provide... Correct Answers
constant pressure
CORRECT ANSWERS | GRADED A+ | VERIFIED ANSWERS |
BRAND NEW VERSION!
How are valves checked to determine that they are holding properly?
Correct Answers by a pressure test
Who is ultimately responsible for being sure that your agency has a good
record keeping system? Correct Answers Supervisor
Which type of pipe is most likely to be damaged by corrosion? Correct
Answers Steel
What is the most important and all inclusive aspect of supervision?
Correct Answers proper utilization of all resources
The maxium flow to be expected through a standard 5/8 x 3/4 meter is
____ gpm. Correct Answers 20 gpm
What does not materially affect the friction loss in a given length of
pipe? Correct Answers hardness of water
Because of local climate conditions, a system may have a specific type
of fire hydrants installed, such as Correct Answers dry barrel or wet
barrel
, One opening has become available that would be an advancement to any
one of three qualified eager employee. How should this situation be
handled? Correct Answers Talk to all three as a group, explain the
situation, and make your selection. Then notify all personnel of the
change.
A decrease in the gallons of pumped a well per kilowatt hour of
electricity used indicates a... Correct Answers decrease in well
efficiency
Objectives for a preventive maintenance program include... Correct
Answers reduce emergency repairs and maintenance
Which one of the following ins unlikely to occur in the distribution
system? Correct Answers increase in dissolved gasses
To be sure a dry barrel hydrant is draining after the test is completed...
Correct Answers feel for a suction through the nozzle
Air tanks on storage tanks require... Correct Answers mesh screens to
prevent entry of animals or birds
In a parallel circuit, if one unit is burned out or disconnected, the other
units will... Correct Answers continue to function
Automation of a water system should provide... Correct Answers
constant pressure
