TECHNICIAN CERTIFICATION (PCT)
EXAM | Q&A WITH RATIONALES
1. A Patient Care Technician is preparing to bathe a
patient who is unconscious. What is the most
important safety consideration?
A) Using warm water to keep the patient comfortable
B) Ensuring the bed is in the lowest position with side
rails up
C) Using soap that matches the patient's preference
D) Completing the bath as quickly as possible
Correct answer: B
Rationale: Patient safety is the priority. Keeping the
bed in the lowest position and side rails up prevents
falls. While comfort (A) is important, it is not the most
critical safety measure. Options C and D do not
address patient safety.
2. A PCT is measuring a patient's blood pressure and
obtains a reading of 148/92 mmHg. What is the most
appropriate action?
A) Document the reading and inform the supervising
nurse
,B) Recheck the blood pressure in the other arm
C) Ignore the reading and retake it in 30 minutes
D) Tell the patient to rest and take it again
immediately
Correct answer: A
Rationale: This reading is elevated (hypertension).
The PCT should document the finding and report it to
the supervising nurse. While rechecking (B) might be
done, the priority is to report the abnormal finding.
Ignoring (C) is inappropriate.
3. A patient is on strict intake and output (I&O)
monitoring. The PCT empties the patient's urinary
drainage bag and records 450 mL of urine. Where
should this be documented?
A) In the patient's personal journal
B) On the intake and output (I&O) flow sheet
C) On the patient's food tray ticket
D) By telling the nurse verbally without writing it
down
Correct answer: B
Rationale: All intake and output measurements must
be accurately documented on the I&O flow sheet or
electronic medical record (EMR). This provides a
,legal record and ensures continuity of care. Option D
is incorrect because verbal communication must be
supported by written documentation.
4. Which of the following is the correct method for
identifying a patient before performing a procedure?
A) Ask the patient, "Are you Mr. Smith?"
B) Check the name on the patient's door
C) Check the patient's identification (ID) bracelet and
ask the patient to state their name and date of birth
D) Look at the patient's chart and assume it is correct
Correct answer: C
Rationale: Patient identification requires using at
least two patient identifiers (e.g., name and date of
birth) and checking the ID bracelet. This is a
standard safety protocol to prevent errors.
5. A PCT is preparing to assist a patient with a meal.
The patient has dysphagia (difficulty swallowing).
What position should the patient be placed in?
A) Supine (lying flat on back)
B) High Fowler's position (sitting upright at 90
degrees)
C) Left side-lying position
, D) Prone (lying on stomach)
Correct answer: B
Rationale: Patients with dysphagia should be
positioned upright (High Fowler's) to reduce the risk
of aspiration during feeding.
6. A PCT is collecting a blood specimen for a
complete blood count (CBC). Which tube color is
typically used?
A) Light blue
B) Lavender (purple)
C) Green
D) Gray
Correct answer: B
Rationale: Lavender-top tubes contain EDTA, which
is the anticoagulant used for hematology studies
such as a CBC. Light blue (A) is for coagulation
studies, green (C) is for chemistry tests, and gray (D)
is for glucose testing.
7. A patient is on contact precautions. What personal
protective equipment (PPE) must the PCT wear when
entering the room?
A) Gloves only