RTE 1401 CHAPTER 5 QUESTIONS AND ANSWERS 2026 100% CORRECT

RTE 1401 CHAPTER 5 QUESTIONS AND
ANSWERS 2026 100% CORRECT

An induction motor allows for? - ANSWER>the rotating of the anode in a vacuum without engineering a motor into


the vacuum




What is the induction motor speeds? - ANSWER>general purpose: 3,400 RPMs




speciality: 10,000 RPM's




Line focus Principal - ANSWER>By angling the face of the anode target, a large actual focal spot size can be


maintained and a small effective focal spot size can be created




What is the most common target angle? - ANSWER>12 degrees


-good overall


-tech does not adjust (built in by manufacture)




Focal spot = - ANSWER>center of the x-ray spot produced

, Smaller focal spot = - ANSWER>-better detail


-better spatial resolution


-pronounced heel effect




Anode heel effect - ANSWER>-very pronounced


-unequal density


-photons wont go through


-give light and black side




-the angle causes the intensity of the x-ray beam to be less on the anode side because some of the x-rays are


absorbed in the target heel




If the angle of the target face is less than 45 degrees.... - ANSWER>the effectie focal spot will be smaller




longer filament/larger focal spot = - ANSWER>decreased spatial resolution