1|Page
RCO Final Exam|| Most Recent Exam Actual Complete
Real Verified Exam Questions And Correct Answers
(Verified Answers) Already Graded A+ | Guaranteed
Success!! Newest Exam!!!
List the steps for recovering a full service brake
application. - Answer-stop, match , vigilance, release
What is the first RTO feature the operator tests when
initially setting up a unit for remote operation? - Answer-
tilt/attachment
What would cause a clicking sound followed by a steady
tone alarm? - Answer-tilt down for 5 secs
9. Which OCU component will allow the RCO to send an
emergency stop command to the RCL? - Answer-ind
10. The RCO begins hearing a steady clicking sound from
the OCU after remaining in 7 mph for
50 seconds. How should the RCO respond? - Answer-full
app
,2|Page
What is the preferred method of slowing or stopping the
movement? - Answer-ramp down
If the primary OCU fails, what would the other operator
need to do in order to continue working? - Answer-
restart.... unlink then relink
Using the OCU, how does the primary RCO initiate a pitch
after completing a job briefing? - Answer-press the pitch
button
How does the secondary RCO accept the pitch? - Answer-
pres the vig button
15. How many seconds does the secondary RCO have to
accept the pitch? - Answer-10 seconds
16. If the primary RCO sends a pitch in error, how could
the primary RCO prevent control from
ni/035
being transferred? - Answer-don't except it
,3|Page
What must the RCO do to avoid "shock loading" (making a
rough/hard joint)? - Answer-use couple the stop
The vigilance feature on the OCU will begin to sound an
alarm after how many seconds of inactivitv? - Answer-50
What brake application will occur if the OCU is tilted and
allowed to time out? - Answer-Emergency
2. When the secondary operator places the OCU into
emergency, who must perform the recovery procedure? -
Answer-both, sec then primary
When are remote control movements not considered
shoving movements? - Answer-when riding the point
List the steps for recovering an emergency brake
application. - Answer-stop, match, vigilance, recover
What speed must not be exceeded when using cameras
to protect a road crossing? When may speed be
resumed? - Answer-4mph
, 4|Page
How many seconds does the RCO have to respond to the
vigilance alarm? - Answer-10
What brake application will occur when the vigilance
feature is allowed to time out? - Answer-full set on the ind.
When set up for two OCU operations, the locomotive will
accept an emergency stop command from which OCU? -
Answer-both
what will occur when the RCL is out of range - Answer-
com loss will apply a full set on the loco
what must be done to move the loco from stop - Answer-
press the vig, then move into couple
that test must be performed when linking up - Answer-tilt,
man down, vigilance test, and a consist test
What test must a crew member perform when changing
crews and the locomotive remains linked? - Answer-
attachment test, light engine running test
RCO Final Exam|| Most Recent Exam Actual Complete
Real Verified Exam Questions And Correct Answers
(Verified Answers) Already Graded A+ | Guaranteed
Success!! Newest Exam!!!
List the steps for recovering a full service brake
application. - Answer-stop, match , vigilance, release
What is the first RTO feature the operator tests when
initially setting up a unit for remote operation? - Answer-
tilt/attachment
What would cause a clicking sound followed by a steady
tone alarm? - Answer-tilt down for 5 secs
9. Which OCU component will allow the RCO to send an
emergency stop command to the RCL? - Answer-ind
10. The RCO begins hearing a steady clicking sound from
the OCU after remaining in 7 mph for
50 seconds. How should the RCO respond? - Answer-full
app
,2|Page
What is the preferred method of slowing or stopping the
movement? - Answer-ramp down
If the primary OCU fails, what would the other operator
need to do in order to continue working? - Answer-
restart.... unlink then relink
Using the OCU, how does the primary RCO initiate a pitch
after completing a job briefing? - Answer-press the pitch
button
How does the secondary RCO accept the pitch? - Answer-
pres the vig button
15. How many seconds does the secondary RCO have to
accept the pitch? - Answer-10 seconds
16. If the primary RCO sends a pitch in error, how could
the primary RCO prevent control from
ni/035
being transferred? - Answer-don't except it
,3|Page
What must the RCO do to avoid "shock loading" (making a
rough/hard joint)? - Answer-use couple the stop
The vigilance feature on the OCU will begin to sound an
alarm after how many seconds of inactivitv? - Answer-50
What brake application will occur if the OCU is tilted and
allowed to time out? - Answer-Emergency
2. When the secondary operator places the OCU into
emergency, who must perform the recovery procedure? -
Answer-both, sec then primary
When are remote control movements not considered
shoving movements? - Answer-when riding the point
List the steps for recovering an emergency brake
application. - Answer-stop, match, vigilance, recover
What speed must not be exceeded when using cameras
to protect a road crossing? When may speed be
resumed? - Answer-4mph
, 4|Page
How many seconds does the RCO have to respond to the
vigilance alarm? - Answer-10
What brake application will occur when the vigilance
feature is allowed to time out? - Answer-full set on the ind.
When set up for two OCU operations, the locomotive will
accept an emergency stop command from which OCU? -
Answer-both
what will occur when the RCL is out of range - Answer-
com loss will apply a full set on the loco
what must be done to move the loco from stop - Answer-
press the vig, then move into couple
that test must be performed when linking up - Answer-tilt,
man down, vigilance test, and a consist test
What test must a crew member perform when changing
crews and the locomotive remains linked? - Answer-
attachment test, light engine running test
