SONICWALL – SNSA 2026/2027
ACTUAL QUESTIONS WITH VERIFIED
ANSWERS.
If the Logging Level filter is defined as Error, which of the
following alert types will also be displayed in the results?(Select
all that apply) - correct answer-Least to most significant logging
levels: Debug, Inform, Notice, Warning, Error, Critical, Alert &
Emergency. If "error" is filtered then the 3 higher priority event
logs will also be displayed while excluding the lower priorities.
Answer is Critical, Alert and Emergency.
Select the default server types that are available when
configuring the Public Server wizard.(Select all that apply) -
correct answer-Web Server, FTP Server, Mail Server, Terminal
Service Server & other
Sonicwall Adminstrator has modified the default LAN>WAN
Access Rule from "Allow" to "Deny" blocking all outbound WAN
traffic. Which of the following statements is applicable in this
context? - correct answer-LAN user cannot access the Internet,
but the appliance can still register with MySonicWall.com and
update the UTM signatures.
,Which Filtering option allows you to exclude events at lower
priority? - correct answer-The logging levels. See answer from
question 90 above as reference.
Which of the following user variables are defined to configure
static routes to foward traffic?(Select all that apply) - correct
answer-Destination address, destination mask, gateway and
interface
What type of system schedule options can be defined in
SonicOS?(Select all that apply) - correct answer-Once,
Recurring and Mixed. The option can be found under the
Manage Tab >> Appliance >> System Schedule
Which option is recommended to be left unchecked when using
Stateful HA? - correct answer-Preempt mode is recommended
to be disabled when enabling Stateful High Availability, because
preempt mode can be over-aggressive about failing over to the
Backup appliance.
What type of intermetiate traffic is monitored by the Packet
Monitor?(Select all that apply) - correct answer-Multicast
IP helper
, reassembled
fragmented
remote mirror
IPsec
SSL decrypted
What type of information is displayed on the Threat Protection
panel?(Select all that apply) - correct answer-Viruses Blocked
Intrusions Prevented
Spyware Blocked
Multimedia (IM/P2P) Detected/Blocked
How do you enable dynamic OSF routing on the SonicWall
firewall? - correct answer-1. Navigate to MANAGE | System
Setup | Network > Routing > Settings.
2. From Routing mode, select Advanced Routing. A
confirmation message displays.
DPI-SSL examines SSL traffic, regardless of the port number. -
correct answer-True
ACTUAL QUESTIONS WITH VERIFIED
ANSWERS.
If the Logging Level filter is defined as Error, which of the
following alert types will also be displayed in the results?(Select
all that apply) - correct answer-Least to most significant logging
levels: Debug, Inform, Notice, Warning, Error, Critical, Alert &
Emergency. If "error" is filtered then the 3 higher priority event
logs will also be displayed while excluding the lower priorities.
Answer is Critical, Alert and Emergency.
Select the default server types that are available when
configuring the Public Server wizard.(Select all that apply) -
correct answer-Web Server, FTP Server, Mail Server, Terminal
Service Server & other
Sonicwall Adminstrator has modified the default LAN>WAN
Access Rule from "Allow" to "Deny" blocking all outbound WAN
traffic. Which of the following statements is applicable in this
context? - correct answer-LAN user cannot access the Internet,
but the appliance can still register with MySonicWall.com and
update the UTM signatures.
,Which Filtering option allows you to exclude events at lower
priority? - correct answer-The logging levels. See answer from
question 90 above as reference.
Which of the following user variables are defined to configure
static routes to foward traffic?(Select all that apply) - correct
answer-Destination address, destination mask, gateway and
interface
What type of system schedule options can be defined in
SonicOS?(Select all that apply) - correct answer-Once,
Recurring and Mixed. The option can be found under the
Manage Tab >> Appliance >> System Schedule
Which option is recommended to be left unchecked when using
Stateful HA? - correct answer-Preempt mode is recommended
to be disabled when enabling Stateful High Availability, because
preempt mode can be over-aggressive about failing over to the
Backup appliance.
What type of intermetiate traffic is monitored by the Packet
Monitor?(Select all that apply) - correct answer-Multicast
IP helper
, reassembled
fragmented
remote mirror
IPsec
SSL decrypted
What type of information is displayed on the Threat Protection
panel?(Select all that apply) - correct answer-Viruses Blocked
Intrusions Prevented
Spyware Blocked
Multimedia (IM/P2P) Detected/Blocked
How do you enable dynamic OSF routing on the SonicWall
firewall? - correct answer-1. Navigate to MANAGE | System
Setup | Network > Routing > Settings.
2. From Routing mode, select Advanced Routing. A
confirmation message displays.
DPI-SSL examines SSL traffic, regardless of the port number. -
correct answer-True
