ACI Concrete Strength Testing
Technician CP-19 Exam Questions and
Answers with Verified Solutions | Latest
Updated 2026
These procedures for capping Planeness, perpendicularity
enable concrete cylinders and
cores to meet the standard's
requirements for ________ and
_________.
Equipment needed for the Plates, alignment, melting
capping process includes
capping _____, _____devices,
and ______ pots.
Plates for neat cement and Glass, metal granite or diabase
high strength gypsum plaster
caps should be made of _____,
_____, _____ or _____.
Sulfur mortar cap plates Metal, Stone
should be formed against _____
or _____ plates.
The purpose of the guide bar True
or bull's eye level is to ensure
that caps remain
perpendicular to the axis of
the cylinder within 0.5
, degrees. True or False?
To avoid accidents during Peripheral heating
reheating of cooled sulfur, use
melting pots that have _____.
The technician should use a Neat cement paste
stiff layer of _____ to cap fresh
concrete cylinders.
Hardened concrete cylinders High-strength gypsum paste, neat
should be capped with _____, cement paste, or sulfur mortar
_____ or _____.
Plaster of paris and mixtures False
of plaster of paris and portland
cement are examples of
suitable high strength plasters.
True or False?
Sulfur mortars and 35MPa (5000 psi), the cylinder
high-strength gypsum cement strength
cubes must demonstrate a
minimum compressive
strength of _____ or ___ __,
whichever is greater.
The cement paste should be 2,4, settling
applied to the freshly molded
cylinder from _____ to _____
hours after molding. This is to
allow for _____ of the concrete
specimen.
Technician CP-19 Exam Questions and
Answers with Verified Solutions | Latest
Updated 2026
These procedures for capping Planeness, perpendicularity
enable concrete cylinders and
cores to meet the standard's
requirements for ________ and
_________.
Equipment needed for the Plates, alignment, melting
capping process includes
capping _____, _____devices,
and ______ pots.
Plates for neat cement and Glass, metal granite or diabase
high strength gypsum plaster
caps should be made of _____,
_____, _____ or _____.
Sulfur mortar cap plates Metal, Stone
should be formed against _____
or _____ plates.
The purpose of the guide bar True
or bull's eye level is to ensure
that caps remain
perpendicular to the axis of
the cylinder within 0.5
, degrees. True or False?
To avoid accidents during Peripheral heating
reheating of cooled sulfur, use
melting pots that have _____.
The technician should use a Neat cement paste
stiff layer of _____ to cap fresh
concrete cylinders.
Hardened concrete cylinders High-strength gypsum paste, neat
should be capped with _____, cement paste, or sulfur mortar
_____ or _____.
Plaster of paris and mixtures False
of plaster of paris and portland
cement are examples of
suitable high strength plasters.
True or False?
Sulfur mortars and 35MPa (5000 psi), the cylinder
high-strength gypsum cement strength
cubes must demonstrate a
minimum compressive
strength of _____ or ___ __,
whichever is greater.
The cement paste should be 2,4, settling
applied to the freshly molded
cylinder from _____ to _____
hours after molding. This is to
allow for _____ of the concrete
specimen.
