Always follow the ________ for your machine when operating it.
A PQR
B NSA
C SOP
D SPC
Give this one a try later!
C SOP
When circumstances at work create a dangerous situation, you should _________ .
A apply for hazardous duty pay
B not proceed until the dangerous situation is eliminated
C ensure that personal protection equipment is used
D proceed with the utmost care
,Give this one a try later!
B not proceed until the dangerous situation is eliminated
If you notice an employee acting in a manor that jeopardizes the safety of others, and
you do not feel comfortable approaching that person, you should _________.
A Write a note and leave it at the persons workstation
B Report the person to the supervisor immediately
C Report the actions to a supervisor at the end of your shift
D Tell your coworkers to approach the person
Give this one a try later!
B Report the person to the supervisor immediately
An important rule to follow for fire safety and containment is _________ .
A fight fires with available extinguishers until the fire department arrives
B open all windows and doors to release smoke and fumes
C keep exit paths cleared and doors closed
D remove unnecessary fire suppressant equipment from every workstation
Give this one a try later!
C keep exit paths cleared and doors closed
OSHA requires two people to lift any object heavier than _______ pounds if no lift device
is available.
A 10
B 40
,C 25
D 50
Give this one a try later!
D 50
A wrench applies __________ to the head of a threaded fastener to turn it.
A pressure
B compression
C torque
D ratchet
Give this one a try later!
C torque
When performing robot maintenance, where should the lockout/tagout be located?
A On the breaker that controls all power to the cell
B On the robot power source
C On the robot controller
D On the teach pendant
Give this one a try later!
A On the breaker that controls all power to the cell
If a large quantity of liquid is spilled into a sanitary sewer, the worker that discovers it
should __________ .
, A close off the sewer at the first junction
B notify their supervisor or team leader immediately so the appropriate authorities
can be contacted
C ignore the problem to avoid getting the co-worker in trouble
D take a water sample to determine the concentration levels
Give this one a try later!
B notify their supervisor or team leader immediately so the appropriate
authorities can be contacted
_________ can be used effectively to increase efficiency and improve process quality.
A Work team audits
B QA work cells
C Change requests
D Member training
Give this one a try later!
D Member training
To __________ workers should always interrupt the power at the motor
disconnect/safety switch.
A perform a lockout/tagout
B test machine performance
C perform an emergency machine shutdown
D save on power usage
Give this one a try later!
A PQR
B NSA
C SOP
D SPC
Give this one a try later!
C SOP
When circumstances at work create a dangerous situation, you should _________ .
A apply for hazardous duty pay
B not proceed until the dangerous situation is eliminated
C ensure that personal protection equipment is used
D proceed with the utmost care
,Give this one a try later!
B not proceed until the dangerous situation is eliminated
If you notice an employee acting in a manor that jeopardizes the safety of others, and
you do not feel comfortable approaching that person, you should _________.
A Write a note and leave it at the persons workstation
B Report the person to the supervisor immediately
C Report the actions to a supervisor at the end of your shift
D Tell your coworkers to approach the person
Give this one a try later!
B Report the person to the supervisor immediately
An important rule to follow for fire safety and containment is _________ .
A fight fires with available extinguishers until the fire department arrives
B open all windows and doors to release smoke and fumes
C keep exit paths cleared and doors closed
D remove unnecessary fire suppressant equipment from every workstation
Give this one a try later!
C keep exit paths cleared and doors closed
OSHA requires two people to lift any object heavier than _______ pounds if no lift device
is available.
A 10
B 40
,C 25
D 50
Give this one a try later!
D 50
A wrench applies __________ to the head of a threaded fastener to turn it.
A pressure
B compression
C torque
D ratchet
Give this one a try later!
C torque
When performing robot maintenance, where should the lockout/tagout be located?
A On the breaker that controls all power to the cell
B On the robot power source
C On the robot controller
D On the teach pendant
Give this one a try later!
A On the breaker that controls all power to the cell
If a large quantity of liquid is spilled into a sanitary sewer, the worker that discovers it
should __________ .
, A close off the sewer at the first junction
B notify their supervisor or team leader immediately so the appropriate authorities
can be contacted
C ignore the problem to avoid getting the co-worker in trouble
D take a water sample to determine the concentration levels
Give this one a try later!
B notify their supervisor or team leader immediately so the appropriate
authorities can be contacted
_________ can be used effectively to increase efficiency and improve process quality.
A Work team audits
B QA work cells
C Change requests
D Member training
Give this one a try later!
D Member training
To __________ workers should always interrupt the power at the motor
disconnect/safety switch.
A perform a lockout/tagout
B test machine performance
C perform an emergency machine shutdown
D save on power usage
Give this one a try later!
