SNT-TC-1A Questions
2026-2027
Expert-Verified Questions and Answers
(With A+ Grades Guarantee)
, d. SNT-TC-IA is not intended to be used as a strict Which of the following statements is true concerning usage the of SNT-TC-1A?
specification. a. SNT-TC-1A is intended for use by a limited set of industrial segments.
b. SNT-TC-1A was generated to satisfy the specification requirements of ASME.
C. SNT-TC-IA was last revised in 1988.
d. SNT-TC-IA is not intended to be used as a strict specification.
a. written and stated in general terms. The SNT-TC-1A Interpretation Panel will respond to inquiries about SNT-TC-1A.
The inquiry must be:
a. written and stated in general terms.
b. written including specific details of the case, e.g., names, places, dates, and
other pertinent facts.
c. considered by the ASNT Board of Directors if it involves decisions that would
place ASNT in a position between buyer and seller.
d. ruled upon by the Technical and Education Council of ASNT before the SNT-TC-
1A Interpretation Panel prepares a response.
b. SNT-TC-1A was first published in the late 1960s. Which of the following statements is true?
a. ASNT has been providing certification examinations for Level III personnel since
the late 1960s.
b. SNT-TC-1A was first published in the late 1960s.
c. SNT-TC-1A requires that Level III personnel be qualified and certified by ASNT.
d. SNT-TC-1A was developed to satisfy requirements for NDT personnel
qualification and certification set forth in parts of the ASME Boiler and Pressure
Vessel Code.
d. may engage an outside service but is, nevertheless, With regard to the training of NDT personnel, the employer:
responsible for the certification of the company's NDT a. must conduct all of the training on the premises.
personnel. b. may engage an outside service who must conduct the training on the employer's
premises.
c. should not conduct the training, being too close to the company's problems.
d. may engage an outside service but is, nevertheless, responsible for the
certification of the company's NDT personnel.
b. to establish their own written practice for the SNT-TC-1A is intended as a guideline for employers:
qualification and certification of their NDT personnel. a. to establish their own written practice that must be used as a strict specification.
b. to establish their own written practice for the qualification and certification of their
NDT personnel.
c. to define training course requirements for contractors performing outside training
services.
d. who are corporate members of ASNT.
c. The employer should review the detailed The following is a statement in SNT-TC-1A: "It is recognized that these guidelines
recommendations and modify them, as necessary, to meet may not be appropriate for certain employers, circumstances, and/or applications."
its particular needs. What should be done if the guidelines are not appropriate?
a. The employer must change its operations to conform to the guidelines.
b. The employer must seek relief from ASNT for inappropriate applications.
c. The employer should review the detailed recommendations and modify them, as
necessary, to meet its particular needs.
d. The employer shall submit an inquiry in writing directed to the SNT-TC-1A
Interpretation Panel.
d. A certifying agency is any organization used by an Which of the following statements is not true?
employer in training NDT personnel. a. Certification is written testimony of qualification.
b. Qualification is the skill, training, and experience required for personnel to
properly perform the duties of a specific job.
c. The employer is the corporate or private entity that employs personnel for wages
or salary.
d. A certifying agency is any organization used by an employer in training NDT
personnel.
b. The individual's employer. Who should be responsible to assess whether or not an individual should be
qualified and certified who does not perform NDT, but monitors and evaluates NDT?
a. ASNT.
b. The individual's employer.
c. A government regulatory agency.
d. The customer's auditor.
2026-2027
Expert-Verified Questions and Answers
(With A+ Grades Guarantee)
, d. SNT-TC-IA is not intended to be used as a strict Which of the following statements is true concerning usage the of SNT-TC-1A?
specification. a. SNT-TC-1A is intended for use by a limited set of industrial segments.
b. SNT-TC-1A was generated to satisfy the specification requirements of ASME.
C. SNT-TC-IA was last revised in 1988.
d. SNT-TC-IA is not intended to be used as a strict specification.
a. written and stated in general terms. The SNT-TC-1A Interpretation Panel will respond to inquiries about SNT-TC-1A.
The inquiry must be:
a. written and stated in general terms.
b. written including specific details of the case, e.g., names, places, dates, and
other pertinent facts.
c. considered by the ASNT Board of Directors if it involves decisions that would
place ASNT in a position between buyer and seller.
d. ruled upon by the Technical and Education Council of ASNT before the SNT-TC-
1A Interpretation Panel prepares a response.
b. SNT-TC-1A was first published in the late 1960s. Which of the following statements is true?
a. ASNT has been providing certification examinations for Level III personnel since
the late 1960s.
b. SNT-TC-1A was first published in the late 1960s.
c. SNT-TC-1A requires that Level III personnel be qualified and certified by ASNT.
d. SNT-TC-1A was developed to satisfy requirements for NDT personnel
qualification and certification set forth in parts of the ASME Boiler and Pressure
Vessel Code.
d. may engage an outside service but is, nevertheless, With regard to the training of NDT personnel, the employer:
responsible for the certification of the company's NDT a. must conduct all of the training on the premises.
personnel. b. may engage an outside service who must conduct the training on the employer's
premises.
c. should not conduct the training, being too close to the company's problems.
d. may engage an outside service but is, nevertheless, responsible for the
certification of the company's NDT personnel.
b. to establish their own written practice for the SNT-TC-1A is intended as a guideline for employers:
qualification and certification of their NDT personnel. a. to establish their own written practice that must be used as a strict specification.
b. to establish their own written practice for the qualification and certification of their
NDT personnel.
c. to define training course requirements for contractors performing outside training
services.
d. who are corporate members of ASNT.
c. The employer should review the detailed The following is a statement in SNT-TC-1A: "It is recognized that these guidelines
recommendations and modify them, as necessary, to meet may not be appropriate for certain employers, circumstances, and/or applications."
its particular needs. What should be done if the guidelines are not appropriate?
a. The employer must change its operations to conform to the guidelines.
b. The employer must seek relief from ASNT for inappropriate applications.
c. The employer should review the detailed recommendations and modify them, as
necessary, to meet its particular needs.
d. The employer shall submit an inquiry in writing directed to the SNT-TC-1A
Interpretation Panel.
d. A certifying agency is any organization used by an Which of the following statements is not true?
employer in training NDT personnel. a. Certification is written testimony of qualification.
b. Qualification is the skill, training, and experience required for personnel to
properly perform the duties of a specific job.
c. The employer is the corporate or private entity that employs personnel for wages
or salary.
d. A certifying agency is any organization used by an employer in training NDT
personnel.
b. The individual's employer. Who should be responsible to assess whether or not an individual should be
qualified and certified who does not perform NDT, but monitors and evaluates NDT?
a. ASNT.
b. The individual's employer.
c. A government regulatory agency.
d. The customer's auditor.
