CLL013 DoD Packaging Exam 100%
1. Which of the following publications provides the minimum requirements for
uniform military marking for shipping and storage?
• MIL-STD-2073-1D
• MIL-STD-129
• MIL-STD-1660
• MIL-STD-1660C
2. On a new acquisition program who is responsible for developing the packaging
requirements for new items?
• LEM or the contractor
• PM or Inventory Manager
• Service Inventory Manager, Supply Planners or the contractor
• Packaging Specialist or PM
3. During which phase should the LEM/IPS Manager ensure that spares
procurements contain proper packaging requirements?
• Production and Deployment
• Technology Maturation and Risk
• Operation and Support
• Material Solution Analysis
4. Which of the following regulations provides management principles and
mandatory policies and procedures for managing all acquisition programs?
• DoD 4100.1-R
• DoD 4145.19-R-1
• DoD 4500.9-R
• DoD 5000.1
5. Which of the following refers to an item which is manufactured and sent to the
warfighter for immediate use or installation or to a contractors facility for the use
within a larger system?
• Production Units
• Spare Parts
6. Which of the following publications provides the minimum requirements for
uniform military marking for shipping and storage?
• MIL-STD-2073-1
• MIL-STD-129
• MIL-HDBK-774
7. What is the military packaging based upon?
• Lowest overall cost
• All answers are correct
• Optimum packaging designs
• Lessons learned
8. Which of the following are legitimate DCMA CAO responsibilities that can be
delegated by Contracting Officer?
• Supply Discrepancy Report (SDR) investigations
, • Packaging Pre award survey
• Contractor Packaging capabilities review
• All of the answers are correct
9. What are the two major operations involved in packaging?
• Storage and Handling
• Preservation and Packaging
• Transportation and Storage
• Wrapping and cushioning
10. Which of the following is considered the greatest risk factor in the distribution
cycle?
• Packaging
• Receiving
• Storage
• Transportation
11.Which of the following standards covers the establishment and implementation
of Electrostatic discharge (ESD) Control Program for any activity that designs, test,
inspects, manufactures, processes, assembles, installs, packages, labels, or
otherwise handles electrical or electrical parts, assemblies and equipment
susceptible to damage by static electricy?
MIL-STD-1686
MIL-STD-2073-
1 MIL-HDBK-
774 MIL-STD-
300
12.During World War II which of the following types of packaging referred to
supplies that were strapped or otherwise fastened to pallets that had been
especially designed for particular commodities?
Skiloads
Overpacked wirebound boxes
Palletized unit loads
V-board boxes
Bonus Questions and Answers
1. The responsibility for evaluating unique PHS&T requirements for a system for
its entire life cycle belongs to whom?
• DCMA Packaging Division
• CAO Technic al Specialist
• Program Manager
• Logistics Element Manager (LEM) or the Integrated Product Support (IPS) Element
Manager
2. What is the goal of providing packaging to retrograde materiel?
• Reduce repair costs, damage in transit and ensure the safe return of materiel to
the repair facility or storage
• To increase the amount of materiel support to the warfighter while operating
in a forward capacity
• To reduce shipping cost and make sure that shipping designs function.
1. Which of the following publications provides the minimum requirements for
uniform military marking for shipping and storage?
• MIL-STD-2073-1D
• MIL-STD-129
• MIL-STD-1660
• MIL-STD-1660C
2. On a new acquisition program who is responsible for developing the packaging
requirements for new items?
• LEM or the contractor
• PM or Inventory Manager
• Service Inventory Manager, Supply Planners or the contractor
• Packaging Specialist or PM
3. During which phase should the LEM/IPS Manager ensure that spares
procurements contain proper packaging requirements?
• Production and Deployment
• Technology Maturation and Risk
• Operation and Support
• Material Solution Analysis
4. Which of the following regulations provides management principles and
mandatory policies and procedures for managing all acquisition programs?
• DoD 4100.1-R
• DoD 4145.19-R-1
• DoD 4500.9-R
• DoD 5000.1
5. Which of the following refers to an item which is manufactured and sent to the
warfighter for immediate use or installation or to a contractors facility for the use
within a larger system?
• Production Units
• Spare Parts
6. Which of the following publications provides the minimum requirements for
uniform military marking for shipping and storage?
• MIL-STD-2073-1
• MIL-STD-129
• MIL-HDBK-774
7. What is the military packaging based upon?
• Lowest overall cost
• All answers are correct
• Optimum packaging designs
• Lessons learned
8. Which of the following are legitimate DCMA CAO responsibilities that can be
delegated by Contracting Officer?
• Supply Discrepancy Report (SDR) investigations
, • Packaging Pre award survey
• Contractor Packaging capabilities review
• All of the answers are correct
9. What are the two major operations involved in packaging?
• Storage and Handling
• Preservation and Packaging
• Transportation and Storage
• Wrapping and cushioning
10. Which of the following is considered the greatest risk factor in the distribution
cycle?
• Packaging
• Receiving
• Storage
• Transportation
11.Which of the following standards covers the establishment and implementation
of Electrostatic discharge (ESD) Control Program for any activity that designs, test,
inspects, manufactures, processes, assembles, installs, packages, labels, or
otherwise handles electrical or electrical parts, assemblies and equipment
susceptible to damage by static electricy?
MIL-STD-1686
MIL-STD-2073-
1 MIL-HDBK-
774 MIL-STD-
300
12.During World War II which of the following types of packaging referred to
supplies that were strapped or otherwise fastened to pallets that had been
especially designed for particular commodities?
Skiloads
Overpacked wirebound boxes
Palletized unit loads
V-board boxes
Bonus Questions and Answers
1. The responsibility for evaluating unique PHS&T requirements for a system for
its entire life cycle belongs to whom?
• DCMA Packaging Division
• CAO Technic al Specialist
• Program Manager
• Logistics Element Manager (LEM) or the Integrated Product Support (IPS) Element
Manager
2. What is the goal of providing packaging to retrograde materiel?
• Reduce repair costs, damage in transit and ensure the safe return of materiel to
the repair facility or storage
• To increase the amount of materiel support to the warfighter while operating
in a forward capacity
• To reduce shipping cost and make sure that shipping designs function.
