AVIA342quiz1.

Question 1
pts
To toggle between active navigation frequencies (ILS/VOR) you will press the
<--> button to flip between the active and standby channel within the blue
box. The active channel is on the right and the standby is on the left.




True



False




Question 2
pts
How and where does your turn coordinator show up on the Garmin G1000 PFD?




Small bar under the roll triangle (Step on the ball) &
Magenta arrow that extends to the right or left from top center of the HSI


It is a standby instrument and not part of the G1000



It is displayed on the MFD aux page 4



Turn coordinator will only show on the PFD in GPS NAV mode

, Question 3
pts
When turning the COM-RADIO, which channel is active for TX and RX?




The one indicated in Red


The one indicated in White


The one indicated in Green


The one indicated in Blue

The green field is the active field for TX and RX. The left field that is white
can be used for RX only.




Question 4
Not yet graded / 5 pts
How do you get in and out of the flight plan page group?
Your Answer:
Pressing the FPL button on the side of the screen. PFD only allows access to
the current flight plan but the MFD will show all the stored flight plans plus
the active. To get out, just press the FPL button again to exit.


Question 5
pts
Up to 99 flight plans can be stored in the Garmin G1000?
(According to the Garmin G1000 Integrated Flight Deck Pilot's Guide - Section 5.6)



True