Lectures notes
On
Production and Operation
Management
Prepared by
Dr. Sarojrani Pattnaik Dr. Swagatika Mishra
Assistant Professor
Department of Mechanical Engineering
VSSUT Burla
.
, PRODUCTION AND OPERATION MANAGEMENT(3-0-0)
1. Productivity : Importance, productivity ratio, productivity measurement,
productivity index, awareness — improvement — maintenance (A.I.M)
proceSs.
2. Production System Models of production system, Product Vs. Services,
Process-focused & product focused systems, product strategies, product
life cycle, production function.
3. Forecasting : Methods — moving average, exponential smoothing,
Regression analysis, coefficient of co-relation, Delphi, Market survey.
4. Facilities Planning : Site location, facilities layout and various types,
planning using CRAFT work place design, working conditions — noise
illumination etc.
5. Motion study — principles of motion — economy, Time study-standard time.
6. Production Planning & Control : Aggregate planning. Sequencing, Line
balancing, Flow control, Dispatching, expediting, Gantt chart, line of
balance, learing curve.
7. Project Management — Network scheduling, PERT. Critical path, Most
likely time estimate , Resource leveling.
8. 38.Modern Trends in Manufacturing :Basic concepts of CAD,CAM,FMS, CIM,
ISO 9000, Quality circle, Kaizen, Kanbans, Poke Yoke' supply chain
management.
Text Books
1. Production Systems : Planning, Analysis & Control : By — Riggs, J.L.(4th
Edn.) John Wiley & Sons
2. Modern Production/Operation management : By — Buffa, E.S. & Sarin,
=,.K.(8`" Edn.) John Wiley & Sons.
3. Production & Operations Management : By Panneer saivem, R.(2' 1 Edn.)
PHI
4. Production & Operations Managem ent : By Chary, S.N.(TMH)
, VEER SURENDRA SAI UNIVERSITY OF TECHNOLOGY BURLAHA
DEPARTMENT OF MECHANICAL
LESSON PLAN FOR Production and Operation Management
SUBJECT CODE: 8th Semester
Lecture Topics to be covered Remark
Lecture 1 Productivity: Importance, productivity ratio, productivity
measurement, productivity index
Lecture 2 Awareness – improvement – maintenance (A.I.M) process,
Production System, Models of production system
Lecture 3 Product Vs. Services, Process-focused & product- focused systems
Lecture 4 Product strategies, product life cycle, production function
Lecture 5 Forecasting: Methods
Lecture 6 Moving average, Exponential smoothing
Lecture 7 Regression analysis, coefficient of co-relation
Lecture 8 Delphi, Market survey
Lecture 9 Facilities planning: Site location, facilities layout
Lecture 10 Types of facility layout, Planning using CRAFT work place design
Lecture 11 Working conditions – noise illumination etc.
Lecture 12 Problems on single facility location using median method
Lecture 13 Problems on single facility location using minimax method and
gravity method
Lecture 14 Problems on single facility location using Euclidean-distance
location
Lecture 15 Motion study, Principles of motion- economy, method study
Lecture 16 Rules concerning human body, workplace layout and materials
handling,
Lecture 17 Rules concerning tools and equipments design, time conservation
Lecture 18 Time study and work measurement techniques
, Lecture 19 Performance rating and different types of allowances
Lecture 20 Production planning and control- Aggregate planning
Lecture 21 Sequencing and line balancing
Lecture 22 Flow control
Lecture 23 Dispatching, centralized and decentralized dispatching
Lecture 24 Expediting and Gantt chart
Lecture 25 Line of balance and learning curve
Lecture 26 Project management, network scheduling
Lecture 27 PERT with problems
Lecture 28 Problems
Lecture 29 Critical path method with problems
Lecture 30 Problems
Lecture 31 Resource levelling
Lecture 32 Basic concepts of CAD, CAM, FMS
Lecture 33 CIM, JIT, ISO 9000
Lecture 34 Quality circle, Kaizen, Kanbans
Lecture 35 Poke Yoke, Supply chain management
Lecture 36 Revision of problems
Lecture 37 Revision of problems
Lecture 38 Revision of problems
Lecture 39 Revision of problems
Lecture 40 Revision of problems
On
Production and Operation
Management
Prepared by
Dr. Sarojrani Pattnaik Dr. Swagatika Mishra
Assistant Professor
Department of Mechanical Engineering
VSSUT Burla
.
, PRODUCTION AND OPERATION MANAGEMENT(3-0-0)
1. Productivity : Importance, productivity ratio, productivity measurement,
productivity index, awareness — improvement — maintenance (A.I.M)
proceSs.
2. Production System Models of production system, Product Vs. Services,
Process-focused & product focused systems, product strategies, product
life cycle, production function.
3. Forecasting : Methods — moving average, exponential smoothing,
Regression analysis, coefficient of co-relation, Delphi, Market survey.
4. Facilities Planning : Site location, facilities layout and various types,
planning using CRAFT work place design, working conditions — noise
illumination etc.
5. Motion study — principles of motion — economy, Time study-standard time.
6. Production Planning & Control : Aggregate planning. Sequencing, Line
balancing, Flow control, Dispatching, expediting, Gantt chart, line of
balance, learing curve.
7. Project Management — Network scheduling, PERT. Critical path, Most
likely time estimate , Resource leveling.
8. 38.Modern Trends in Manufacturing :Basic concepts of CAD,CAM,FMS, CIM,
ISO 9000, Quality circle, Kaizen, Kanbans, Poke Yoke' supply chain
management.
Text Books
1. Production Systems : Planning, Analysis & Control : By — Riggs, J.L.(4th
Edn.) John Wiley & Sons
2. Modern Production/Operation management : By — Buffa, E.S. & Sarin,
=,.K.(8`" Edn.) John Wiley & Sons.
3. Production & Operations Management : By Panneer saivem, R.(2' 1 Edn.)
PHI
4. Production & Operations Managem ent : By Chary, S.N.(TMH)
, VEER SURENDRA SAI UNIVERSITY OF TECHNOLOGY BURLAHA
DEPARTMENT OF MECHANICAL
LESSON PLAN FOR Production and Operation Management
SUBJECT CODE: 8th Semester
Lecture Topics to be covered Remark
Lecture 1 Productivity: Importance, productivity ratio, productivity
measurement, productivity index
Lecture 2 Awareness – improvement – maintenance (A.I.M) process,
Production System, Models of production system
Lecture 3 Product Vs. Services, Process-focused & product- focused systems
Lecture 4 Product strategies, product life cycle, production function
Lecture 5 Forecasting: Methods
Lecture 6 Moving average, Exponential smoothing
Lecture 7 Regression analysis, coefficient of co-relation
Lecture 8 Delphi, Market survey
Lecture 9 Facilities planning: Site location, facilities layout
Lecture 10 Types of facility layout, Planning using CRAFT work place design
Lecture 11 Working conditions – noise illumination etc.
Lecture 12 Problems on single facility location using median method
Lecture 13 Problems on single facility location using minimax method and
gravity method
Lecture 14 Problems on single facility location using Euclidean-distance
location
Lecture 15 Motion study, Principles of motion- economy, method study
Lecture 16 Rules concerning human body, workplace layout and materials
handling,
Lecture 17 Rules concerning tools and equipments design, time conservation
Lecture 18 Time study and work measurement techniques
, Lecture 19 Performance rating and different types of allowances
Lecture 20 Production planning and control- Aggregate planning
Lecture 21 Sequencing and line balancing
Lecture 22 Flow control
Lecture 23 Dispatching, centralized and decentralized dispatching
Lecture 24 Expediting and Gantt chart
Lecture 25 Line of balance and learning curve
Lecture 26 Project management, network scheduling
Lecture 27 PERT with problems
Lecture 28 Problems
Lecture 29 Critical path method with problems
Lecture 30 Problems
Lecture 31 Resource levelling
Lecture 32 Basic concepts of CAD, CAM, FMS
Lecture 33 CIM, JIT, ISO 9000
Lecture 34 Quality circle, Kaizen, Kanbans
Lecture 35 Poke Yoke, Supply chain management
Lecture 36 Revision of problems
Lecture 37 Revision of problems
Lecture 38 Revision of problems
Lecture 39 Revision of problems
Lecture 40 Revision of problems
