CCNA 1 Final Exam Answer v5 & v5.02 2015 (100%)
CCNA 1 Final Exam Answer v5 &
v5.02 2015 (100%)
1. Which communication tool allows real-time
collaboration?
• wiki
• e-mail
• weblog
• instant messaging
2. A host is accessing a Web server on a remote network.
Which three functions are performed by intermediary
network devices during this conversation? (Choose three.)
• regenerating data signals
• acting as a client or a server
• providing a channel over which messages travel
• applying security settings to control the flow of data
• notifying other devices when errors occur
• serving as the source or destination of the messages
3. A home user is looking for an ISP connection that
provides high speed digital transmission over regular
phone lines. What ISP connection type should be
used?
• DSL
• dial-up
• satellite
• cell modem
• cable modem
4. A company is expanding its business to other
countries. All branch offices must remain connected to
corporate headquarters at all times. Which network
technology is required to support this requirement?
• LAN
• MAN
• WAN
• WLAN
5. Refer to the exhibit. From which location did this
router load the IOS?
,CCNA 1 Final Exam Answer v5 & v5.02 2015 (100%)
CCNA 1 Final Exam Answer 001 (v5.02, 2015)
• flash memory
• NVRAM?
• RAM
• ROM
• a TFTP server?
6. Which connection provides a secure CLI session with
encryption to a Cisco network device?
• a console connection
• an AUX connection
• a Telnet connection
• an SSH connection
7. Refer to the exhibit. An administrator is trying to
configure the switch but receives the error message that is
displayed in the exhibit. What is the problem?
CCNA 1 Final Exam Answer 002 (v5.02, 2015)
• The entire command, configure terminal, must be used.
• The administrator is already in global configuration mode.
, CCNA 1 Final Exam Answer v5 & v5.02 2015 (100%)
• The administrator must first enter privileged EXEC mode before
issuing the command.
• The administrator must connect via the console port to
access global configuration mode.
8. An administrator uses the Ctrl-Shift-6 key
combination on a switch after issuing the ping
command. What is the purpose of using these
keystrokes?
• to restart the ping process
• to interrupt the ping process
• to exit to a different configuration mode
• to allow the user to complete the command
9. What function does pressing the Tab key have
when entering a command in IOS?
• It aborts the current command and returns to configuration mode.
• It exits configuration mode and returns to user EXEC mode.
• It moves the cursor to the beginning of the next line.
• It completes the remainder of a partially typed word in a command.
10. Refer to the exhibit. An administrator wants to
change the name of a brand new switch, using the
hostname command as shown. What prompt will display
after the command is issued??
CCNA 1 Final Exam Answer 003 (v5.02, 2015)
• My Switch(config)#?
• Switch(config)#?
• MySwitch(config)#?
• My(config)#?
• Switch#
11. Refer to the exhibit. A network administrator is
configuring access control to switch SW1. If the
administrator uses Telnet to connect to the switch,
which password is needed to access user EXEC mode?
CCNA 1 Final Exam Answer v5 &
v5.02 2015 (100%)
1. Which communication tool allows real-time
collaboration?
• wiki
• weblog
• instant messaging
2. A host is accessing a Web server on a remote network.
Which three functions are performed by intermediary
network devices during this conversation? (Choose three.)
• regenerating data signals
• acting as a client or a server
• providing a channel over which messages travel
• applying security settings to control the flow of data
• notifying other devices when errors occur
• serving as the source or destination of the messages
3. A home user is looking for an ISP connection that
provides high speed digital transmission over regular
phone lines. What ISP connection type should be
used?
• DSL
• dial-up
• satellite
• cell modem
• cable modem
4. A company is expanding its business to other
countries. All branch offices must remain connected to
corporate headquarters at all times. Which network
technology is required to support this requirement?
• LAN
• MAN
• WAN
• WLAN
5. Refer to the exhibit. From which location did this
router load the IOS?
,CCNA 1 Final Exam Answer v5 & v5.02 2015 (100%)
CCNA 1 Final Exam Answer 001 (v5.02, 2015)
• flash memory
• NVRAM?
• RAM
• ROM
• a TFTP server?
6. Which connection provides a secure CLI session with
encryption to a Cisco network device?
• a console connection
• an AUX connection
• a Telnet connection
• an SSH connection
7. Refer to the exhibit. An administrator is trying to
configure the switch but receives the error message that is
displayed in the exhibit. What is the problem?
CCNA 1 Final Exam Answer 002 (v5.02, 2015)
• The entire command, configure terminal, must be used.
• The administrator is already in global configuration mode.
, CCNA 1 Final Exam Answer v5 & v5.02 2015 (100%)
• The administrator must first enter privileged EXEC mode before
issuing the command.
• The administrator must connect via the console port to
access global configuration mode.
8. An administrator uses the Ctrl-Shift-6 key
combination on a switch after issuing the ping
command. What is the purpose of using these
keystrokes?
• to restart the ping process
• to interrupt the ping process
• to exit to a different configuration mode
• to allow the user to complete the command
9. What function does pressing the Tab key have
when entering a command in IOS?
• It aborts the current command and returns to configuration mode.
• It exits configuration mode and returns to user EXEC mode.
• It moves the cursor to the beginning of the next line.
• It completes the remainder of a partially typed word in a command.
10. Refer to the exhibit. An administrator wants to
change the name of a brand new switch, using the
hostname command as shown. What prompt will display
after the command is issued??
CCNA 1 Final Exam Answer 003 (v5.02, 2015)
• My Switch(config)#?
• Switch(config)#?
• MySwitch(config)#?
• My(config)#?
• Switch#
11. Refer to the exhibit. A network administrator is
configuring access control to switch SW1. If the
administrator uses Telnet to connect to the switch,
which password is needed to access user EXEC mode?
