BICSI Practice Test-RETAKE
The 2 main considerations concerning the existing cabling are? - ANSWERGrandfathered system
Abandoned cable 11-25
The type of cutover where cross-connects are relocated one pair after another until completed is called
a - ANSWERrolling cut 11-28
Which practice involves moving the customer to a temporary office space until their section of the
retrofit is completed and then moving them back to their recabled office space? - ANSWERSwing space
phasing
Which of these testers would you clamp around a strand of fiber to check for the presence of light? -
ANSWERFiber strand identifier 11-11
A ______ provides a quick graphical representation of how the circuit is layed out? - ANSWERCLR 11-27
A ______ uses several pluggable modules to locate and Identify cables. - ANSWEROffice locator kit
A _________ injects light (at a proper wavelength) and measures the results t the other end. -
ANSWERLight source and power meter
A ________ detects the presence of light within a fiber strand - ANSWERFiber strand identifier
, A _______ uses a laser to identify fiber strands and find breaks in the fiber at the near end. -
ANSWERVisual fault locator
A________ will leave the customer momentarily without communications - ANSWERHot-cut 11-28
During a _______, cross-connects are relocated one pair after another until completed. - ANSWERRolling
cut
*_________ is a property of an electromagnetic field built around a conductor that opposes any changes
in current flow in a circuit. - ANSWERInductance
____________ is a property of conductors that allows storage of electrical charges when potential
differences (voltages) exist between the conductors. - ANSWERCapacitance
*In AC circuits, the total opposition to current flow is called _________, which is measured in ohms. -
ANSWERImpedance
The nominal characteristic impedance of balanced twisted pair cable is _______ ohms at 100 MHz -
ANSWER100
Pair 626 would be in the __________ Super Binder - ANSWERRed
Series ______ is the preferred choice for longer runs - ANSWER11
The _________ connector/s have center pins (choose all that apply) - ANSWERN
BNC
The 2 main considerations concerning the existing cabling are? - ANSWERGrandfathered system
Abandoned cable 11-25
The type of cutover where cross-connects are relocated one pair after another until completed is called
a - ANSWERrolling cut 11-28
Which practice involves moving the customer to a temporary office space until their section of the
retrofit is completed and then moving them back to their recabled office space? - ANSWERSwing space
phasing
Which of these testers would you clamp around a strand of fiber to check for the presence of light? -
ANSWERFiber strand identifier 11-11
A ______ provides a quick graphical representation of how the circuit is layed out? - ANSWERCLR 11-27
A ______ uses several pluggable modules to locate and Identify cables. - ANSWEROffice locator kit
A _________ injects light (at a proper wavelength) and measures the results t the other end. -
ANSWERLight source and power meter
A ________ detects the presence of light within a fiber strand - ANSWERFiber strand identifier
, A _______ uses a laser to identify fiber strands and find breaks in the fiber at the near end. -
ANSWERVisual fault locator
A________ will leave the customer momentarily without communications - ANSWERHot-cut 11-28
During a _______, cross-connects are relocated one pair after another until completed. - ANSWERRolling
cut
*_________ is a property of an electromagnetic field built around a conductor that opposes any changes
in current flow in a circuit. - ANSWERInductance
____________ is a property of conductors that allows storage of electrical charges when potential
differences (voltages) exist between the conductors. - ANSWERCapacitance
*In AC circuits, the total opposition to current flow is called _________, which is measured in ohms. -
ANSWERImpedance
The nominal characteristic impedance of balanced twisted pair cable is _______ ohms at 100 MHz -
ANSWER100
Pair 626 would be in the __________ Super Binder - ANSWERRed
Series ______ is the preferred choice for longer runs - ANSWER11
The _________ connector/s have center pins (choose all that apply) - ANSWERN
BNC
