OSHA FINAL EXAM GUIDE
Which hard hat class protects against falling objects and high-voltage electric shock and burns?
Class E
In the construction industry, what is the most common route of lead exposure?
Inhalation
According to OSHA, workers have all these responsibilities EXCEPT:
Following the employer's safety and health rules
Reporting hazardous conditions
Cooperating with OSHA inspectors
Correcting violations
Correcting Violations
Hazards directly related to excavations include all these types EXCEPT:
Lack of oxygen—asphyxiation
Inhalation of toxic materials
Lack of water—dehydration
Fire
lack of water
If they discover important new information about a chemical's hazards, manufacturers or importers of
hazardous chemicals must update the chemical's Material Safety Data Sheet within _____ months.
3
Limited access zones around masonry wall construction must meet all these requirements EXCEPT:
Equal to the height of the wall plus four feet
Set up on the side of the wall that is scaffolded
Run the entire length of the wall
Restricted to workers actively engaged in building the wall
Set up on the side of the wall that is scaffolded
As part of Process Safety Management, written procedures are required for establishing and implementing
changes in the event of all these situations EXCEPT:
New technology
Replacement in kind
, Change in chemicals
Change in equipment
placement in kind
As part of a written plan for emergency operations, the employer must identify _____ at a construction site
before construction operations begin.
emergency escape routes
A worker who is not using fall arrest protection loses his footing at the top of a six-story building, calls for
help, and then falls. If his coworkers on the ground hear his cry, how much time do they have to take
measures to break his fall?
2 seconds
Who is covered by the OSH Act?
All workers and their employers under federal government authority
All self-employed workers
Immediate members of all farm families
The unemployed
All workers and their employers under federal government authority
Which of these metals should not be welded, cut, or heated unless general or local ventilation is installed?
Cadmium-bearing filler materials
When there is a break in an electric tool's insulation or wiring, the tool's metal parts may become _____.
Energized
Before a worker enters a confined space, the internal atmosphere must be _____.
Tested
What criteria determine a company's exemption from OSHA's injury-recording requirement?
the total number of employees, including temporary employees
What causes the majority of fire-related deaths?
burns
Power tools must be fitted with guards and _____.
safety switches
The working length of a ladder is the distance between the foot and the _____.
top support
Which hard hat class protects against falling objects and high-voltage electric shock and burns?
Class E
In the construction industry, what is the most common route of lead exposure?
Inhalation
According to OSHA, workers have all these responsibilities EXCEPT:
Following the employer's safety and health rules
Reporting hazardous conditions
Cooperating with OSHA inspectors
Correcting violations
Correcting Violations
Hazards directly related to excavations include all these types EXCEPT:
Lack of oxygen—asphyxiation
Inhalation of toxic materials
Lack of water—dehydration
Fire
lack of water
If they discover important new information about a chemical's hazards, manufacturers or importers of
hazardous chemicals must update the chemical's Material Safety Data Sheet within _____ months.
3
Limited access zones around masonry wall construction must meet all these requirements EXCEPT:
Equal to the height of the wall plus four feet
Set up on the side of the wall that is scaffolded
Run the entire length of the wall
Restricted to workers actively engaged in building the wall
Set up on the side of the wall that is scaffolded
As part of Process Safety Management, written procedures are required for establishing and implementing
changes in the event of all these situations EXCEPT:
New technology
Replacement in kind
, Change in chemicals
Change in equipment
placement in kind
As part of a written plan for emergency operations, the employer must identify _____ at a construction site
before construction operations begin.
emergency escape routes
A worker who is not using fall arrest protection loses his footing at the top of a six-story building, calls for
help, and then falls. If his coworkers on the ground hear his cry, how much time do they have to take
measures to break his fall?
2 seconds
Who is covered by the OSH Act?
All workers and their employers under federal government authority
All self-employed workers
Immediate members of all farm families
The unemployed
All workers and their employers under federal government authority
Which of these metals should not be welded, cut, or heated unless general or local ventilation is installed?
Cadmium-bearing filler materials
When there is a break in an electric tool's insulation or wiring, the tool's metal parts may become _____.
Energized
Before a worker enters a confined space, the internal atmosphere must be _____.
Tested
What criteria determine a company's exemption from OSHA's injury-recording requirement?
the total number of employees, including temporary employees
What causes the majority of fire-related deaths?
burns
Power tools must be fitted with guards and _____.
safety switches
The working length of a ladder is the distance between the foot and the _____.
top support
