Springer Series in Advanced Manufacturing
,Other titles in this series
Assembly Line Design
B. Rekiek and A. Delchambre
Advances in Design
H.A. ElMaraghy and W.H. ElMaraghy (Eds.)
Effective Resource Management in Manufacturing Systems:
Optimization Algorithms in Production Planning
M. Caramia and P. Dell’Olmo
Condition Monitoring and Control for Intelligent Manufacturing
L. Wang and R.X. Gao (Eds.)
Optimal Production Planning for PCB Assembly
W. Ho and P. Ji
Trends in Supply Chain Design and Management:
Technologies and Methodologies
H. Jung, F.F. Chen and B. Jeong (Eds.)
Collaborative Product Design and Manufacturing
Methodologies and Applications
W.D. Li, S.K. Ong, A.Y.C. Nee and C. McMahon (Eds.)
Process Planning and Scheduling for Distributed Manufacturing
L. Wang and W. Shen (Eds.)
,Stanislav S. Makhanov
Weerachai Anotaipaiboon
Advanced Numerical
Methods to Optimize
Cutting Operations
of Five-Axis
Milling Machines
With 113 Figures and 16 Tables
123
, Stanislav S. Makhanov
School of Information and Computer Technology
Sirindhorn International Institute of Technology
Thammasat University
131 Moo 5, Tiwanont Road
Bangkadi, Pathum Thani 12000
Thailand
http://www.5axis-thai.com/
Weerachai Anotaipaiboon
National Science and Technology Development Agency
111 Thailand Science Park
Klong 1, Klong Luang
Pathumthani, 12120, Thailand
Library of Congress Control Number: 2007922327
ISBN 978-3-540-71120-9 Springer Berlin Heidelberg New York
This work is subject to copyright. All rights are reserved, whether the whole or part of the material
is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broad-
casting, reproduction on microfilm or in any other way, and storage in data banks. Duplication of
this publication or parts thereof is permitted only under the provisions of the German Copyright Law
of September 9, 1965, in its current version, and permission for use must always be obtained from
Springer. Violations are liable for prosecution under the German Copyright Law.
Springer is a part of Springer Science+Business Media
springer.com
© Springer-Verlag Berlin Heidelberg 2007
The use of general descriptive names, registered names, trademarks, etc. in this publication does not
imply, even in the absence of a specific statement, that such names are exempt from the relevant
protective laws and regulations and therefore free for general use.
Typesetting: Digital data supplied by author
Production: LE-TEX Jelonek, Schmidt & Vöckler GbR, Leipzig
Cover: eStudio Calamar S.L., F. Steinen-Broo, Girona, Spain
SPIN 11803164 89/3100/YL - 5 4 3 2 1 0 Printed on acid-free paper
,Other titles in this series
Assembly Line Design
B. Rekiek and A. Delchambre
Advances in Design
H.A. ElMaraghy and W.H. ElMaraghy (Eds.)
Effective Resource Management in Manufacturing Systems:
Optimization Algorithms in Production Planning
M. Caramia and P. Dell’Olmo
Condition Monitoring and Control for Intelligent Manufacturing
L. Wang and R.X. Gao (Eds.)
Optimal Production Planning for PCB Assembly
W. Ho and P. Ji
Trends in Supply Chain Design and Management:
Technologies and Methodologies
H. Jung, F.F. Chen and B. Jeong (Eds.)
Collaborative Product Design and Manufacturing
Methodologies and Applications
W.D. Li, S.K. Ong, A.Y.C. Nee and C. McMahon (Eds.)
Process Planning and Scheduling for Distributed Manufacturing
L. Wang and W. Shen (Eds.)
,Stanislav S. Makhanov
Weerachai Anotaipaiboon
Advanced Numerical
Methods to Optimize
Cutting Operations
of Five-Axis
Milling Machines
With 113 Figures and 16 Tables
123
, Stanislav S. Makhanov
School of Information and Computer Technology
Sirindhorn International Institute of Technology
Thammasat University
131 Moo 5, Tiwanont Road
Bangkadi, Pathum Thani 12000
Thailand
http://www.5axis-thai.com/
Weerachai Anotaipaiboon
National Science and Technology Development Agency
111 Thailand Science Park
Klong 1, Klong Luang
Pathumthani, 12120, Thailand
Library of Congress Control Number: 2007922327
ISBN 978-3-540-71120-9 Springer Berlin Heidelberg New York
This work is subject to copyright. All rights are reserved, whether the whole or part of the material
is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broad-
casting, reproduction on microfilm or in any other way, and storage in data banks. Duplication of
this publication or parts thereof is permitted only under the provisions of the German Copyright Law
of September 9, 1965, in its current version, and permission for use must always be obtained from
Springer. Violations are liable for prosecution under the German Copyright Law.
Springer is a part of Springer Science+Business Media
springer.com
© Springer-Verlag Berlin Heidelberg 2007
The use of general descriptive names, registered names, trademarks, etc. in this publication does not
imply, even in the absence of a specific statement, that such names are exempt from the relevant
protective laws and regulations and therefore free for general use.
Typesetting: Digital data supplied by author
Production: LE-TEX Jelonek, Schmidt & Vöckler GbR, Leipzig
Cover: eStudio Calamar S.L., F. Steinen-Broo, Girona, Spain
SPIN 11803164 89/3100/YL - 5 4 3 2 1 0 Printed on acid-free paper
