latihan beda banget.pdf
MTCNA Alfabet.pdf
MTCNA Edward lulus.pdf
MTCNA Mas Arya.pdf
mtcna.pdf
mtcre 1.pdf
mtcre 2.pdf
mtcre3.pdf
My Exam MTCNA 2016 02.pdf
SOAL + JAWABAN MTCRE 1_Kusuma.pdf
SOAL + JAWABAN MTCRE 2_Giri.pdf
soal mikrotik frengky .pdf
SOAL TEST MTCNA MIKROTIK.pdf
buat pak dedi.pdf
Contoh Soal MTCNA.pdf
DOC-20160416-WA0001.pdf
FULL SOAL UJIAN MIKROTIK.pdf
jawaban jon!!! (2).pdf
jawaban jon!!!.pdf
, 00:02:54
last save: 2016-05-20 11:14:47
1. It is possible to create an encrypted PPPoE tunnel in RouterOS:
true
2. How long is level 1 (free) license valid?
A. 1 year
B. Infinite time
C. 24 hours
D. 1 month
3. Which type of encryption could be used to establish a connection with a simple passkey without using a
802.1X authentication server?
A. WPA PSK/WPA2 PSK
B. WPA EAP/WPA2 EAP
4. What is the minimal possible wireless configuration to create an Access Point?
A. radio name
B. scan-list
C. frequency
D. band
E. ssid
F. DFS mode
G. WDS
H. mode
5. Which port does PPTP use by default?
A. TCP 1721
B. UDP 1721
C. TCP 1723
D. UDP 1723
6. Mark all correct answers
A. /ip firewall filter allows to deny authentication to AP
B. Wireless access-list could allow and deny connect to your AP
C. Default-Forwarding could be enabled for a specific clients by wireless access-list
D. The only way to prevent wireless clients connections - disable wireless interface
7. You want to use PCQ and allow 256k maximum download and upload for each client. Choose correct
argument values for the required queue.
A. kind=pcq pcq-rate=5000000 pcq-classifier=dst-address
B. kind=pcq pcq-rate=1256000 pcq-classifier=dst-address
, C. kind=pcq pcq-rate=5000000 pcq-classifier=src-address
D. kind=pcq pcq-rate=256000 pcq-classifier=dst-address
E. kind=pcq pcq-rate=256000 pcq-classifier=src-address
8. To connect your MikroTik router to a wireless access point, you have to:
A. Use the same SSID as on accesspoint
B. Use the same Radio Name
C. Use the same Band (5 GHz, 2.4 GHz, ...)
9. Firewall NAT rules process only the first packet of each connection.
false
10. In which situations Netinstall can not be used to install RouterOS on a RouterBOARD?
A. The router is connected only to a secondary Ethernet port
B. The router does not have an operating system
C. The password of the router is not known
D. The router is connected only to a wireless network
11. For static routing functionality, additionally to the RouterOS 'system' package, you will also need the
following software package:
A. advanced-tools
B. routing
C. no extra package required
D. dhcp
12. When adding a static route, you must always ensure that you add both the gateway and the interface.
false
13. Bridging loops can be avoided by enabling:
A. RSTP protocol
B. STP protocol
C. Connection tracking
D. UDP filter
E. ICMP filter
14. Netinstall can be used to
A. Keep configuration, but reset a lost admin password
B. Reinstall software without losing licence
C. Install different software version (upgrade or downgrade)
D. Install package for different hardware architecture
15. For user in local PPP Secrets/PPP Profiles database, it is possible to
, A. Allow/deny use of more than one login by this user
B. Allow login by PPPoE and PPTP, but deny login by L2TP
C. Set max values for transferred data (Rx/Tx)
D. Allow only PPPoE login
E. Deny services (like telnet) only for this user or for one group of users
16. What is necessary for PPPoE client configuration?
A. Interface (on which PPPoE client is going to work)
B. Static IP address on PPPoE client interface
C. ip firewall nat masquerade rule
17. Evaluate the following information:
Access Point configuration:
-- wlan1 is in 'AP-Bridge' mode
-- Bridge1 has wlan1 and ether1 as ports
CPE configuration:
-- wlan1 is in 'Station-Bridge' mode
-- Bridge1 has wlan1 and ether1 as ports
Select protocols that will pass from ether1 on the CPE to ether1 on the Access Point.
A. IPv4
B. ARP
C. USB
D. BGP
E. Firewire
F. IPv6
G. DHCP
H. PPPoE
18. Mark all packages required for PPPoE server on MikroTik RouterOS
A. ppp
B. user-manager
C. radius
D. synchronous
E. system
19. Action=redirect applies to
A. Firewall Filter rules
B. DST-NAT rules
C. Route rules
D. SRC-NAT rules
MTCNA Alfabet.pdf
MTCNA Edward lulus.pdf
MTCNA Mas Arya.pdf
mtcna.pdf
mtcre 1.pdf
mtcre 2.pdf
mtcre3.pdf
My Exam MTCNA 2016 02.pdf
SOAL + JAWABAN MTCRE 1_Kusuma.pdf
SOAL + JAWABAN MTCRE 2_Giri.pdf
soal mikrotik frengky .pdf
SOAL TEST MTCNA MIKROTIK.pdf
buat pak dedi.pdf
Contoh Soal MTCNA.pdf
DOC-20160416-WA0001.pdf
FULL SOAL UJIAN MIKROTIK.pdf
jawaban jon!!! (2).pdf
jawaban jon!!!.pdf
, 00:02:54
last save: 2016-05-20 11:14:47
1. It is possible to create an encrypted PPPoE tunnel in RouterOS:
true
2. How long is level 1 (free) license valid?
A. 1 year
B. Infinite time
C. 24 hours
D. 1 month
3. Which type of encryption could be used to establish a connection with a simple passkey without using a
802.1X authentication server?
A. WPA PSK/WPA2 PSK
B. WPA EAP/WPA2 EAP
4. What is the minimal possible wireless configuration to create an Access Point?
A. radio name
B. scan-list
C. frequency
D. band
E. ssid
F. DFS mode
G. WDS
H. mode
5. Which port does PPTP use by default?
A. TCP 1721
B. UDP 1721
C. TCP 1723
D. UDP 1723
6. Mark all correct answers
A. /ip firewall filter allows to deny authentication to AP
B. Wireless access-list could allow and deny connect to your AP
C. Default-Forwarding could be enabled for a specific clients by wireless access-list
D. The only way to prevent wireless clients connections - disable wireless interface
7. You want to use PCQ and allow 256k maximum download and upload for each client. Choose correct
argument values for the required queue.
A. kind=pcq pcq-rate=5000000 pcq-classifier=dst-address
B. kind=pcq pcq-rate=1256000 pcq-classifier=dst-address
, C. kind=pcq pcq-rate=5000000 pcq-classifier=src-address
D. kind=pcq pcq-rate=256000 pcq-classifier=dst-address
E. kind=pcq pcq-rate=256000 pcq-classifier=src-address
8. To connect your MikroTik router to a wireless access point, you have to:
A. Use the same SSID as on accesspoint
B. Use the same Radio Name
C. Use the same Band (5 GHz, 2.4 GHz, ...)
9. Firewall NAT rules process only the first packet of each connection.
false
10. In which situations Netinstall can not be used to install RouterOS on a RouterBOARD?
A. The router is connected only to a secondary Ethernet port
B. The router does not have an operating system
C. The password of the router is not known
D. The router is connected only to a wireless network
11. For static routing functionality, additionally to the RouterOS 'system' package, you will also need the
following software package:
A. advanced-tools
B. routing
C. no extra package required
D. dhcp
12. When adding a static route, you must always ensure that you add both the gateway and the interface.
false
13. Bridging loops can be avoided by enabling:
A. RSTP protocol
B. STP protocol
C. Connection tracking
D. UDP filter
E. ICMP filter
14. Netinstall can be used to
A. Keep configuration, but reset a lost admin password
B. Reinstall software without losing licence
C. Install different software version (upgrade or downgrade)
D. Install package for different hardware architecture
15. For user in local PPP Secrets/PPP Profiles database, it is possible to
, A. Allow/deny use of more than one login by this user
B. Allow login by PPPoE and PPTP, but deny login by L2TP
C. Set max values for transferred data (Rx/Tx)
D. Allow only PPPoE login
E. Deny services (like telnet) only for this user or for one group of users
16. What is necessary for PPPoE client configuration?
A. Interface (on which PPPoE client is going to work)
B. Static IP address on PPPoE client interface
C. ip firewall nat masquerade rule
17. Evaluate the following information:
Access Point configuration:
-- wlan1 is in 'AP-Bridge' mode
-- Bridge1 has wlan1 and ether1 as ports
CPE configuration:
-- wlan1 is in 'Station-Bridge' mode
-- Bridge1 has wlan1 and ether1 as ports
Select protocols that will pass from ether1 on the CPE to ether1 on the Access Point.
A. IPv4
B. ARP
C. USB
D. BGP
E. Firewire
F. IPv6
G. DHCP
H. PPPoE
18. Mark all packages required for PPPoE server on MikroTik RouterOS
A. ppp
B. user-manager
C. radius
D. synchronous
E. system
19. Action=redirect applies to
A. Firewall Filter rules
B. DST-NAT rules
C. Route rules
D. SRC-NAT rules
