F-60 FIRE GUARD EXAM STUDY GUIDE COMPLETE 2022

F-60 FIRE GUARD EXAM STUDY GUIDE COMPLETE
2022
THE COF HOLDER MUST KEEP THE COF ___________ OR READILY AVAILABLE
FOR INSPECTION
UPON HIS OR HER PERSON
PORTABLE LPG CONTAINERS THAT ARE MORE THAN ________ MUST NOT BE
STORED, HANDLED, OR USED INDOORS.
16.4 OZ
PERMITS SHALL BE READILY AVAILABLE ON THE _________ FOR INSPECTION
BY FIRE DEPARTMENT REPRESENTATIVES.
PREMISES
HOT WORK PERMITS SHALL BE AVAILABLE FOR INSPECTION BY ANY
REPRESENTATIVE FOR __________ AFTER THE WORK IS COMPLETE.
48 HOURS
FOR _____________, THE OWNER OF THE HOT WORK OPERATION AREAS MUST
BE NOTIFIED IN WRITING BY THE CITYWIDE PERMIT HOLDER AT LEAST 48
HOURS BEFORE HOT WORK IS TO BE STARTED.
CITYWIDE HOT WORK OPERATIONS
PRE-HOT WORK CHECKS MUST BE CONDUCTED BEFORE HOT WORK IS
AUTHORIZED AND AT LEAST ___________.
ONCE PER DAY
FIRE WATCH WILL BE PROVIDED FOR A MINIMUM OF _________ AFTER WORK
IS COMPLETE.
30 MINUTES
HOT WORK AREAS MUST BE KEPT ___________ FEET AWAY FROM ANY
COMBUSTIBLE MATERIAL.
35
PAPER, WOOD SHAVINGS, STRAW AND FABRIC ARE EXAMPLES OF
______________.
COMBUSTIBLE MATERIAL
THE ENTIRE WORK AREA SHOULD BE CHECKED AFTER COMPLETION OF HOT
WORK FOR __________.
FIRES
A MINIMUM ____________ RATING FIRE EXTINGUISHER MUST BE READILY
ACCESSIBLE.
2-A:20-B:C
THE FIRE EXTINGUISHER MUST BE ACCESSIBLE WITHIN __________ FEET OF
HOT WORK LOCATION AND FIRE GUARD.
30
FOR TORCH-APPLIED ROOF SYSTEMS, A MINIMUM ___________ RATING FIRE
EXTINGUISHER MUST BE READILY ACCESSIBLE.
3-A: 40-B:C
___________ PROTECTION SYSTEMS SHALL NOT BE SHUT OFF WHILE HOT
WORK IS PERFORMED.