OSHA Basic Orientation Plus Test | 51
Questions with 100% Correct Answers |
Verified | Updated Summer 2023.
What is the most frequently cited OSHA violation? - -Fall Protection
-What key elements are essential to recognizing hazards and reducing or eliminating
workplace hazards? - -Management commitment and employee involvement
-You are encouraged to ask your coworkers/supervisor for information whenever you
have a problem or are in doubt about what to do on a job? - -True
-It is your responsibility to follow all safety regulations, inform your employer of any
unsafe condition; report all injuries no matter how minor they seem and wear the
proper personal protective equipment? - -True
-The OSHA standard that addresses the requirements for preventing and lessening the
results of a bad release of toxic, reactive, flammable, or highly explosive hazardous
chemicals from a process - -Process safety management Standard
-The process Hazard Analysis (PHA) is one of the most important parts of the PSM
program. PHAs are used to identify and evaluate major processes and ensure they are -
-Evaluated, Controlled, and Identified
-In the PSM standard OSHA states employees must be trained if they work with highly
hazardous chemicals. - -True
-Facilities are not permitted to control your entrance and exit in covered process areas.
- -False
, -What should be your first concern from the moment you enter the work site? - -Safety
-Under the Stop Work Authority, you have the right and obligation to stop a work
activity if you have reason to believe your own safety or a coworkers safety is in jeopardy
or if the work plan is not clearly established or understood . - -True
-What's needed in order to operate a plant-owned vehicle or mobile equipment while at
a facility - -qualified only authorized only
-What type of work permits you may encounter on the job - -safe work permits
confined space entry permits, hot work permits, line entry or line breaking permits,
lockout/tagout permits
-if you are replacing a piece of equipment the new one should be the same as the one
being removed. If its not you should find out whether the change was on purpose. what
is this called - -Management of change
-Used only where an immediate life threatening hazard exists - -Danger
-Used where immediate non life threatening hazards exist - -Warning Sign
-Used to warn against potential hazards or to caution against unsafe practices - -
Caution signs
-Physical devices that are designed to prevent entry into an area where hazards are
present. - -Barriers
-Obstacles that discourage the passage of persons or vehicles - -Barricade
-When lifting or setting down a load, bend at the - -Knees
Questions with 100% Correct Answers |
Verified | Updated Summer 2023.
What is the most frequently cited OSHA violation? - -Fall Protection
-What key elements are essential to recognizing hazards and reducing or eliminating
workplace hazards? - -Management commitment and employee involvement
-You are encouraged to ask your coworkers/supervisor for information whenever you
have a problem or are in doubt about what to do on a job? - -True
-It is your responsibility to follow all safety regulations, inform your employer of any
unsafe condition; report all injuries no matter how minor they seem and wear the
proper personal protective equipment? - -True
-The OSHA standard that addresses the requirements for preventing and lessening the
results of a bad release of toxic, reactive, flammable, or highly explosive hazardous
chemicals from a process - -Process safety management Standard
-The process Hazard Analysis (PHA) is one of the most important parts of the PSM
program. PHAs are used to identify and evaluate major processes and ensure they are -
-Evaluated, Controlled, and Identified
-In the PSM standard OSHA states employees must be trained if they work with highly
hazardous chemicals. - -True
-Facilities are not permitted to control your entrance and exit in covered process areas.
- -False
, -What should be your first concern from the moment you enter the work site? - -Safety
-Under the Stop Work Authority, you have the right and obligation to stop a work
activity if you have reason to believe your own safety or a coworkers safety is in jeopardy
or if the work plan is not clearly established or understood . - -True
-What's needed in order to operate a plant-owned vehicle or mobile equipment while at
a facility - -qualified only authorized only
-What type of work permits you may encounter on the job - -safe work permits
confined space entry permits, hot work permits, line entry or line breaking permits,
lockout/tagout permits
-if you are replacing a piece of equipment the new one should be the same as the one
being removed. If its not you should find out whether the change was on purpose. what
is this called - -Management of change
-Used only where an immediate life threatening hazard exists - -Danger
-Used where immediate non life threatening hazards exist - -Warning Sign
-Used to warn against potential hazards or to caution against unsafe practices - -
Caution signs
-Physical devices that are designed to prevent entry into an area where hazards are
present. - -Barriers
-Obstacles that discourage the passage of persons or vehicles - -Barricade
-When lifting or setting down a load, bend at the - -Knees
