School Bus Exam 2023 Graded A
During loading or unloading procedure the students should cross the road in
front of the bus within ____ feet
10
To be a school bus driver, individuals must pass the following written tests
CDL General Knowledge, Passenger Endorsement, School Bus Endorsement
The blind spot behind the bus could extend to how many feet?
400
Overhead inside mirror is used to
see all of the students
When stopping on a railroad crossing the driver must stop no closer than
15 feet
You should conduct a post-trip inspection
you should walk through the bus and around the bus
which of the following should you do when driving the school bus in high wind?
keep a strong grip on the steering wheel and try to anticipate gust
The most dangerous time during the school bus ride is
when loading and unloading students
Passive railway crossing
the type of crossing, which does not have any type of traffic control device
Check that the entry door is not damaged and
operates smoothly and closes securely from the inside
By law, the warning lights must only be used when approaching a
stop to load or unload students
you should activate hazard lights within approximately how many feet before
railroad crossing?
200
At a railroad crossing, the bus is required to stop at the stop line. If there is no
clearly marked stop line, what is the required minimum and maximum stopping
distance?
No closer than 15 feet and no further than 50 feet, where you have the best view of the
tracks
In addition to checking for spare electrical fuses, three red reflective triangles and
a properly charged and rated fire extinguisher, school bus drivers must also
inspect the following emergency equipment
Three red burning flares, a nine-item first-aid kit
All mirrors should be viewed in what manner?
In a logical sequence to ensure that a child or object is not in any of the danger zones
The driver who misses the child to unload at a bus stop should
radio the dispatcher for direction and follow the local procedure
A battery box check is important. The batter must be secure, connection must be
tight, and cell caps must be present. In addition these items should be checked
Battery connections should not show signs of excessive corrosion, and the battery box
and cover or door should be damaged and should be secure
During loading or unloading procedure the students should cross the road in
front of the bus within ____ feet
10
To be a school bus driver, individuals must pass the following written tests
CDL General Knowledge, Passenger Endorsement, School Bus Endorsement
The blind spot behind the bus could extend to how many feet?
400
Overhead inside mirror is used to
see all of the students
When stopping on a railroad crossing the driver must stop no closer than
15 feet
You should conduct a post-trip inspection
you should walk through the bus and around the bus
which of the following should you do when driving the school bus in high wind?
keep a strong grip on the steering wheel and try to anticipate gust
The most dangerous time during the school bus ride is
when loading and unloading students
Passive railway crossing
the type of crossing, which does not have any type of traffic control device
Check that the entry door is not damaged and
operates smoothly and closes securely from the inside
By law, the warning lights must only be used when approaching a
stop to load or unload students
you should activate hazard lights within approximately how many feet before
railroad crossing?
200
At a railroad crossing, the bus is required to stop at the stop line. If there is no
clearly marked stop line, what is the required minimum and maximum stopping
distance?
No closer than 15 feet and no further than 50 feet, where you have the best view of the
tracks
In addition to checking for spare electrical fuses, three red reflective triangles and
a properly charged and rated fire extinguisher, school bus drivers must also
inspect the following emergency equipment
Three red burning flares, a nine-item first-aid kit
All mirrors should be viewed in what manner?
In a logical sequence to ensure that a child or object is not in any of the danger zones
The driver who misses the child to unload at a bus stop should
radio the dispatcher for direction and follow the local procedure
A battery box check is important. The batter must be secure, connection must be
tight, and cell caps must be present. In addition these items should be checked
Battery connections should not show signs of excessive corrosion, and the battery box
and cover or door should be damaged and should be secure
