NIMS measurement, materials, and safety| Questions With 100% Correct Answers | Verified

The safest way to remove chips form a lathe or milling machine is to use a - Brush Small chips left on the spindle nose of the lathe should be cleaned to avoid - Run out on work piece Grease guns are used to insert grease into - Zerk fittings on machine tools To lubricate the ways of a lather, the gibs of a mill, or the cross slide of a grinder - Use lubricant found in central lubricating systems (one shots) If a vertical mill table is loose and has side play, the best solution to alleviate side play is to - Tighten the taper gib adjustment A machinist want to find the proper type of lubrication, schedule and recommended maintenance practices for the head stock of a lathe. The best source of this info is - Preventative maintenance manual Pinning refers to - Loading the file with metal chips Files should be stored - In a toolbox separated from each other The best way to clean chips out of a file is to use - A file card What is the most common injury that may occur during a filing operation - Being stabbed with the tang The best lubricant to prevent wear and increase cutting efficiency for tapping common steels is - Sulfur based oil