ATP Indoc Written Exam Questions and Answers 2023
with complete solution
What are the three ATP core values?
- Constant Professionalism
- Integrity with Student's Investment
- Safety Focused Decisions
When can you take off with less than full fuel tanks?
Only for operation neccesity.
What are some conditions that would allow for partial fuel?
SELECT ALL
- Weight & Balance/Performance Conflicts
- When fueling would cause departure delays
- Quanity of each tank is greater than 1/2 full
- Fuel quantity is accurately determined using methods other than the fuel quantity
indicators (Fuel measurement sticks and indicator tabs)
What are the flap settings and speeds on base?
Flaps 25, 70 KIAS
What are the weather minimums?
1,000 feet, 3 SM visibility
What is the minimum single engine runway length?
3,000 feet
What is the minimum multi engine runway length?
4,000 feet
When can you perform a stop and go?
Only on a checkride with 7,000 feet of runway or longer, and only if you can stop with
3,000 feet remaining.
What is the configuration of an accelerated stall and what speed do you start it
at?
Clean configuration and 80 KIAS.
When do you configure on a non-precision approach?
At the final approach fix at 80 KIAS.
When do you configure on a precision approach?
At half dot below glide slope intercept at 80 KIAS.
What is the flap setting for a precision approach?
Land with flaps 10
What is the flap setting for a non-precision approach?
Put in flaps 25 when descending from MDA and landing is assured
What is the ATP oil requirement?
6.5 quarts - 8 quarts
What is the engine horsepower?
180 HP
What is the engine manufacturer?
Lycoming
What is the prop length?
with complete solution
What are the three ATP core values?
- Constant Professionalism
- Integrity with Student's Investment
- Safety Focused Decisions
When can you take off with less than full fuel tanks?
Only for operation neccesity.
What are some conditions that would allow for partial fuel?
SELECT ALL
- Weight & Balance/Performance Conflicts
- When fueling would cause departure delays
- Quanity of each tank is greater than 1/2 full
- Fuel quantity is accurately determined using methods other than the fuel quantity
indicators (Fuel measurement sticks and indicator tabs)
What are the flap settings and speeds on base?
Flaps 25, 70 KIAS
What are the weather minimums?
1,000 feet, 3 SM visibility
What is the minimum single engine runway length?
3,000 feet
What is the minimum multi engine runway length?
4,000 feet
When can you perform a stop and go?
Only on a checkride with 7,000 feet of runway or longer, and only if you can stop with
3,000 feet remaining.
What is the configuration of an accelerated stall and what speed do you start it
at?
Clean configuration and 80 KIAS.
When do you configure on a non-precision approach?
At the final approach fix at 80 KIAS.
When do you configure on a precision approach?
At half dot below glide slope intercept at 80 KIAS.
What is the flap setting for a precision approach?
Land with flaps 10
What is the flap setting for a non-precision approach?
Put in flaps 25 when descending from MDA and landing is assured
What is the ATP oil requirement?
6.5 quarts - 8 quarts
What is the engine horsepower?
180 HP
What is the engine manufacturer?
Lycoming
What is the prop length?
