AUTO200 LEVEL 1 BAR SMOG INSPECTOR COURSE|2023 LATEST UPDATE|GUARANTEED SUCCESS

What are 2 types of tsi tests 2500 rpm test; idle test What are two types of asm test 50/15 test; 25/25 test What are the fuel caps that are used to calibrate the eis machine Known good and bad fuel caps What types of gases are used to calibratethe E I S machine ... What does dad stand for Data acquisition device. What completed copy of the invoice must the customer receive when they drop off their vehicle for repairs? Written estimate. What is the most important part of completed work order Customer authorization. May a test and repair station sublet repairs? If so what repairs? Exhaust prior to repair When performing a smog inspection the registration needs to compare to the vehicle, true or false True Are all of the required ECS components listed on the under hood in missions label No Part of the ecs system has been removed from the vehicle. How should this be entered in the eis? Missing The belt is missing from the air pump. There is no visual evidence of tempering. How should it be entered into the eis? Defective What entry should be completed if the ignition system is COP? Not required How is nox measured in california emissions test? ... You see that oil is dripping from the engine before you start your eis emission test. What should you do? Reject vehicle before customer leaves. During the asm test the maintenance reminder light is on. What should the technician do? Continue as normal, not a smog issue What should you do if the VIN does not match the vehicle registration? Notify customer The vehicle failed the emission test. You work at a inspection and repair facility. What should you do next? ... During the ASM test the EIS machine indicates "sample dilution" what should you do next? ... How is an ASM test weight determined? Weigh vehicle on dyno What information source specifies the functional tests to be performed? Labels, repair manuel