BTEC Assignment Brief
Pearson BTEC Level 3 National Foundation Diploma in
Qualification
Engineering
Unit number and title
Unit 2: Delivery of Engineering Processes Safely as a
Team
Learning aim(s) (For NQF B: Develop two dimensional (2D) computer-aided
only)
drawings that can be used in engineering processes.
Assignment title
2D CAD drawings
Assessor
Issue date
Hand in deadline
You are an apprentice in a small design office, where
drawings have traditionally been created using sketching
and drawing board techniques, with limited use of CAD
software. New CAD drawings are being created from
Vocational Scenario or artefacts and your manager has asked you to generate
Context two of these new drawings from a given engineered
component and a given electrical circuit. The drawings
you prepare will be used to produce the engineered
component and electrical circuit, so your manager will be
checking that they meet international standards.
You are going to use CAD software to produce a developed
orthographic projection and a circuit diagram.
To do this:
Your tutor will provide you with an engineered component
containing at least three different types of common feature
Task 1 and an electrical circuit containing at least six different
component types.
You then need to:
• Generate an accurate orthographic projection of the
engineered component to an international standard using
, appropriate layers, and provide evidence of employing the
full range of appropriate CAD commands; and
• Generate an accurate circuit diagram of the given
electrical circuit to an international standard using
appropriate layers, and provide evidence of employing the
full range of appropriate CAD commands.
Checklist of evidence
required A small portfolio of assessment evidence. The 2D CAD
drawings should include an orthographic projection and an
electrical circuit diagram. The evidence will include the
drawings, annotated screen shots and observation
records/witness statements to supplement the assessment
evidence you generate.
Criteria covered by this task:
Unit/Criteria
To achieve the criteria you must show that you are able to:
reference
Refine, using layers, an accurate orthographic projection of a
2/B.D2 component containing at least three different types of common feature
and a circuit diagram containing at least six different component types
to an international standard.
Produce, using layers, an accurate orthographic projection of a
2/B.M2 component containing at least three different types of feature and a
circuit diagram containing at least six different component types that
mainly meet an international standard.
2/B.P3 Create an orthographic projection of a given component containing at
least three different types of feature.
2/B.P4 Create a diagram of a given electrical circuit containing at least six
different component types.
Sources of information
to support you with
this Assignment
2
BTEC Assignment Brief v1.0
BTEC Internal Assessment QDAM January 2015
Pearson BTEC Level 3 National Foundation Diploma in
Qualification
Engineering
Unit number and title
Unit 2: Delivery of Engineering Processes Safely as a
Team
Learning aim(s) (For NQF B: Develop two dimensional (2D) computer-aided
only)
drawings that can be used in engineering processes.
Assignment title
2D CAD drawings
Assessor
Issue date
Hand in deadline
You are an apprentice in a small design office, where
drawings have traditionally been created using sketching
and drawing board techniques, with limited use of CAD
software. New CAD drawings are being created from
Vocational Scenario or artefacts and your manager has asked you to generate
Context two of these new drawings from a given engineered
component and a given electrical circuit. The drawings
you prepare will be used to produce the engineered
component and electrical circuit, so your manager will be
checking that they meet international standards.
You are going to use CAD software to produce a developed
orthographic projection and a circuit diagram.
To do this:
Your tutor will provide you with an engineered component
containing at least three different types of common feature
Task 1 and an electrical circuit containing at least six different
component types.
You then need to:
• Generate an accurate orthographic projection of the
engineered component to an international standard using
, appropriate layers, and provide evidence of employing the
full range of appropriate CAD commands; and
• Generate an accurate circuit diagram of the given
electrical circuit to an international standard using
appropriate layers, and provide evidence of employing the
full range of appropriate CAD commands.
Checklist of evidence
required A small portfolio of assessment evidence. The 2D CAD
drawings should include an orthographic projection and an
electrical circuit diagram. The evidence will include the
drawings, annotated screen shots and observation
records/witness statements to supplement the assessment
evidence you generate.
Criteria covered by this task:
Unit/Criteria
To achieve the criteria you must show that you are able to:
reference
Refine, using layers, an accurate orthographic projection of a
2/B.D2 component containing at least three different types of common feature
and a circuit diagram containing at least six different component types
to an international standard.
Produce, using layers, an accurate orthographic projection of a
2/B.M2 component containing at least three different types of feature and a
circuit diagram containing at least six different component types that
mainly meet an international standard.
2/B.P3 Create an orthographic projection of a given component containing at
least three different types of feature.
2/B.P4 Create a diagram of a given electrical circuit containing at least six
different component types.
Sources of information
to support you with
this Assignment
2
BTEC Assignment Brief v1.0
BTEC Internal Assessment QDAM January 2015
