INTERVIEW QUESTION FOR HSE
1. What is the difference between Risk and Hazards?
2. Explain Flash Back Arrestor?
3. Name any ten types of Hazards?
4. List the main causes of accidents with suitable examples.
5. What is the difference LMI and Anti Two Block?
6. What is MSDS?
7. What is PASS in the use of fire extinguisher?
8. List the requirements for a Crane to work at site?
9. List the main parts of a scaffold?
10. What is the difference between JSA and STA?
11. What are the points to be considered for an excavation safety
inspection?
12. List the safety requirement for working at height?
13. List the safety Hazards in confined space?
14. List the Safety points for storage and use of Compressed Gas
Cylinders?
15. What is CABA?
16. List the documents to be checked during Administrative Audit?
17. What do you understand by 100% tie off?
18. List the document to be audited during HSE Audit?
19. Explain HSE Policy statement?
20. List the requirements to be met for approving an Hot Work Permit?
21. What is IDLH?
•STARRT- Safety Task and Risk Reduction Talk
•COSHH- Control of substance hazardous to Health.
•OSHA- Occupational Safety and Health Administration.
•OSHAS- Occupational Health and Safety Assessment Series.
•ELCB- Earth Leakage Circuit Breaker.
•GFCI- Ground Fault circuit Interrupter.
,•BS- British Standard \institute.
•SWL- Safe working Load .
•ANSI- American National standards Institute.
•Lost Time Incident.
•STEL- Short Term Exposure Limit.
•WBGT- Wet Bulb Globe Temperature
•APR- Air Purifying Respirator
•ASR- Air Supplying Respirator.
•SCBA- Self Contain Breathing Apparatus.
•RSO-Radiation Safety Officer
•NFPA- National Fire Protection association
,•ASTM- American Society for Testing of Materials.
•JSA- Job Hazards Analysis.
•LEL- Lower Explosive Limit.
•UEL- Upper Explosive Limits.
•PEL- Permissible Explosive Limit.
•REL- Recommended Exposure Limit
•PSI- Pounds/Square Inch ( 1 bar= 14.7 psi)
HSES QUESTIONS AND ANSWERS
SAFETY STANDARDS
HELMET: --------------- Z-89.1 1981 (ANSI) *5240 (BS)
SAFETY GLASS:--------- Z-87.1 1968 (ANSI) *2092 (BS)
SAFETY HARNESS------ Z-359.1 & Z-10.14 (ANSI) *1397 (BS)
SAFETY SHOES---------- Z-41.1 1967 (ANSI)
RESPIRATOR------------- Z-88.2 1992 (ANSI)
SAFETY ON SCAFFOLDING—A-10.4 1988 (ANSI)
, HSE 150 QUESTION ANSWERS.
ADDED ADVANTAGE TO YOUR KNOWLEDGE
Q1. What is Safety?
Ans.
It is a condition which gives you freedom from hazard, risk,
accident which may cause injury, damage and loss to material
or property damage and even death.
Q2. What is accident?
Ans.
It is an unexpected or unplanned event which may or may not
result in injury or damage or property loss or death.
Q3. What is injury?
Ans.
It is defined as a harmful condition sustained by the body as a
result of an accident.
Q4. What is hazard ?
Ans.
Inherent property of a substance or an occurrence which has
potential to cause loss or damage property, person or
environment.
Q5. What is risk ?
Ans.
In probability of the realization of potential for loss or damage or
injury.
Q6.What is incident?
Ans.
It is an event which represents deviation from the intended
sequence of designed steps.
Q7. What is safety policy?
Ans.
1. What is the difference between Risk and Hazards?
2. Explain Flash Back Arrestor?
3. Name any ten types of Hazards?
4. List the main causes of accidents with suitable examples.
5. What is the difference LMI and Anti Two Block?
6. What is MSDS?
7. What is PASS in the use of fire extinguisher?
8. List the requirements for a Crane to work at site?
9. List the main parts of a scaffold?
10. What is the difference between JSA and STA?
11. What are the points to be considered for an excavation safety
inspection?
12. List the safety requirement for working at height?
13. List the safety Hazards in confined space?
14. List the Safety points for storage and use of Compressed Gas
Cylinders?
15. What is CABA?
16. List the documents to be checked during Administrative Audit?
17. What do you understand by 100% tie off?
18. List the document to be audited during HSE Audit?
19. Explain HSE Policy statement?
20. List the requirements to be met for approving an Hot Work Permit?
21. What is IDLH?
•STARRT- Safety Task and Risk Reduction Talk
•COSHH- Control of substance hazardous to Health.
•OSHA- Occupational Safety and Health Administration.
•OSHAS- Occupational Health and Safety Assessment Series.
•ELCB- Earth Leakage Circuit Breaker.
•GFCI- Ground Fault circuit Interrupter.
,•BS- British Standard \institute.
•SWL- Safe working Load .
•ANSI- American National standards Institute.
•Lost Time Incident.
•STEL- Short Term Exposure Limit.
•WBGT- Wet Bulb Globe Temperature
•APR- Air Purifying Respirator
•ASR- Air Supplying Respirator.
•SCBA- Self Contain Breathing Apparatus.
•RSO-Radiation Safety Officer
•NFPA- National Fire Protection association
,•ASTM- American Society for Testing of Materials.
•JSA- Job Hazards Analysis.
•LEL- Lower Explosive Limit.
•UEL- Upper Explosive Limits.
•PEL- Permissible Explosive Limit.
•REL- Recommended Exposure Limit
•PSI- Pounds/Square Inch ( 1 bar= 14.7 psi)
HSES QUESTIONS AND ANSWERS
SAFETY STANDARDS
HELMET: --------------- Z-89.1 1981 (ANSI) *5240 (BS)
SAFETY GLASS:--------- Z-87.1 1968 (ANSI) *2092 (BS)
SAFETY HARNESS------ Z-359.1 & Z-10.14 (ANSI) *1397 (BS)
SAFETY SHOES---------- Z-41.1 1967 (ANSI)
RESPIRATOR------------- Z-88.2 1992 (ANSI)
SAFETY ON SCAFFOLDING—A-10.4 1988 (ANSI)
, HSE 150 QUESTION ANSWERS.
ADDED ADVANTAGE TO YOUR KNOWLEDGE
Q1. What is Safety?
Ans.
It is a condition which gives you freedom from hazard, risk,
accident which may cause injury, damage and loss to material
or property damage and even death.
Q2. What is accident?
Ans.
It is an unexpected or unplanned event which may or may not
result in injury or damage or property loss or death.
Q3. What is injury?
Ans.
It is defined as a harmful condition sustained by the body as a
result of an accident.
Q4. What is hazard ?
Ans.
Inherent property of a substance or an occurrence which has
potential to cause loss or damage property, person or
environment.
Q5. What is risk ?
Ans.
In probability of the realization of potential for loss or damage or
injury.
Q6.What is incident?
Ans.
It is an event which represents deviation from the intended
sequence of designed steps.
Q7. What is safety policy?
Ans.
