ASNT Level III Basic Study Guide Questions 2022/2023 |
Consisting Of 70 Questions With Verified Answers From
Experts
Which of the following statements is true concerning the usage of SNT-TC-1A?
SNT-TC-1A is not intended to be used as a strict specification.
The SNT-TC-1A Interpretation Panel will respond to inquiries about SNT-TC-1A.
The inquiry must be:
Written and stated in general terms
With regard to the training of NDT personnel, the employer:
May engage an outside service but is, nevertheless, responsible for the certification of
the company's NDT personnel
SNT-TC-1A is intended as a guideline for employers:
To establish their own written practice that must be used as a strict specification.
The following is a statement in SNT-TC-1A "It is recognized that these guidelines
may not be appropriate for certain employers; circumstances and / or
applications." What should be done if the guidelines are not appropriate?
The employer should review the detailed recommendations and modify them as
necessary to meet its particular needs.
Who should be responsible to assess whether or not an individual should be
qualified and certified who does not perform NDT, but monitors and evaluates
NDT?
The individual's employer.
To which of the following NDT methods is SNT-TC-1A currently not applicable
Holographic testing
ASNT intended that the recommendations of SNT-TC-1A be applied
With flexibility and reason
Of the following, which is most appropriate to determine the needs to qualify and
certify personnel whose only NDT function is to operate digital thickness
equipment.
The employer.
Certification is
Written testimony of qualification.
Use of SNT-TC-1A is mandatory when:
It has been specified by the customer.
The basic levels of qualification recommended by SNT-TC-1A are:
Level I, II, III.
Should personnel that operate ultrasonic digital thickness measurement
equipment to qualified and certified
Weather any NDT personnel should be qualified and certified depends solely upon the
needs of the employer and the requirements of the employer's customers or clientele.
According to the recommendations of SNT-TC-1A which of the following is true
concerning a Trainee's activities?
, The Trainee may not conduct nondestructive test independently and may not report test
results
According to SNT-TC-1A, which of the following is not true for a Level III?
Must train and examine the Level I and II personnel in his or her organization.
According to written instructions, an NDT Level I may be qualified to perform:
Specific calibrations, Specific nondestructive test, specific evaluations, and write reports
of test results.
May a Level I independently perform, evaluate and sign for results of
nondestructive test with supervision and guidance from a Level II or III?
Yes, the intent in SNT-TC-1A is that the Level I may perform the above functions
provided that they are in accordance with written instruction of a Level III or designee.
Which of the following statements is true concerning the definitions of Trainee,
Level I, II and III in SNT-TC-1A?
The qualifications for Level III equal and exceed those of Level II.
Which of the following is not within the scope of activities of a Level II individual,
as recommended in SNT-TC-1A?
Establish techniques
A recommended in SNT-TC-1A, a Level II:
My conduct on the job training and guidance of Level I personnel.
According SNT-TC-1A which of the following is true for a Level III?
The Level III shall be capable of evaluating test results in terms of codes standards and
specifications.
In Accordance with SNT-TC-1A, who is responsible for establishing a written
practice for the control and administration of NDT personnel training,
examination and certification?
The employer.
The responsibility of each level of certification for determining the acceptability of
materials or components:
Should be described in the employer's written practice only if they are different form
SNT-TC-1A recommendations.
What factors are to be considered to ensure that a candidate for certification in
NDT understands the principles and procedures involved?
Training, experience and education.
As recommended in SNT-TC-1A, which of the following is true?
SNT-TC-1A does not currently provide a recommendation regarding overtime.
High school educations are recommended as a minimum requirement for:
None of the levels
In Leak testing, recommended work time experience and training:
Differs for each of four major techniques.
It is recommended that the education and experience of a Level III candidate
include
graduation from a 4-year university or college with a degree in engineering or science
college or university plus 1 years' experience in NDT comparable to that of a Level II.
Records substantiating qualification are recommended to be kept on a
Monthly or hourly basis.
Consisting Of 70 Questions With Verified Answers From
Experts
Which of the following statements is true concerning the usage of SNT-TC-1A?
SNT-TC-1A is not intended to be used as a strict specification.
The SNT-TC-1A Interpretation Panel will respond to inquiries about SNT-TC-1A.
The inquiry must be:
Written and stated in general terms
With regard to the training of NDT personnel, the employer:
May engage an outside service but is, nevertheless, responsible for the certification of
the company's NDT personnel
SNT-TC-1A is intended as a guideline for employers:
To establish their own written practice that must be used as a strict specification.
The following is a statement in SNT-TC-1A "It is recognized that these guidelines
may not be appropriate for certain employers; circumstances and / or
applications." What should be done if the guidelines are not appropriate?
The employer should review the detailed recommendations and modify them as
necessary to meet its particular needs.
Who should be responsible to assess whether or not an individual should be
qualified and certified who does not perform NDT, but monitors and evaluates
NDT?
The individual's employer.
To which of the following NDT methods is SNT-TC-1A currently not applicable
Holographic testing
ASNT intended that the recommendations of SNT-TC-1A be applied
With flexibility and reason
Of the following, which is most appropriate to determine the needs to qualify and
certify personnel whose only NDT function is to operate digital thickness
equipment.
The employer.
Certification is
Written testimony of qualification.
Use of SNT-TC-1A is mandatory when:
It has been specified by the customer.
The basic levels of qualification recommended by SNT-TC-1A are:
Level I, II, III.
Should personnel that operate ultrasonic digital thickness measurement
equipment to qualified and certified
Weather any NDT personnel should be qualified and certified depends solely upon the
needs of the employer and the requirements of the employer's customers or clientele.
According to the recommendations of SNT-TC-1A which of the following is true
concerning a Trainee's activities?
, The Trainee may not conduct nondestructive test independently and may not report test
results
According to SNT-TC-1A, which of the following is not true for a Level III?
Must train and examine the Level I and II personnel in his or her organization.
According to written instructions, an NDT Level I may be qualified to perform:
Specific calibrations, Specific nondestructive test, specific evaluations, and write reports
of test results.
May a Level I independently perform, evaluate and sign for results of
nondestructive test with supervision and guidance from a Level II or III?
Yes, the intent in SNT-TC-1A is that the Level I may perform the above functions
provided that they are in accordance with written instruction of a Level III or designee.
Which of the following statements is true concerning the definitions of Trainee,
Level I, II and III in SNT-TC-1A?
The qualifications for Level III equal and exceed those of Level II.
Which of the following is not within the scope of activities of a Level II individual,
as recommended in SNT-TC-1A?
Establish techniques
A recommended in SNT-TC-1A, a Level II:
My conduct on the job training and guidance of Level I personnel.
According SNT-TC-1A which of the following is true for a Level III?
The Level III shall be capable of evaluating test results in terms of codes standards and
specifications.
In Accordance with SNT-TC-1A, who is responsible for establishing a written
practice for the control and administration of NDT personnel training,
examination and certification?
The employer.
The responsibility of each level of certification for determining the acceptability of
materials or components:
Should be described in the employer's written practice only if they are different form
SNT-TC-1A recommendations.
What factors are to be considered to ensure that a candidate for certification in
NDT understands the principles and procedures involved?
Training, experience and education.
As recommended in SNT-TC-1A, which of the following is true?
SNT-TC-1A does not currently provide a recommendation regarding overtime.
High school educations are recommended as a minimum requirement for:
None of the levels
In Leak testing, recommended work time experience and training:
Differs for each of four major techniques.
It is recommended that the education and experience of a Level III candidate
include
graduation from a 4-year university or college with a degree in engineering or science
college or university plus 1 years' experience in NDT comparable to that of a Level II.
Records substantiating qualification are recommended to be kept on a
Monthly or hourly basis.
