Auto200 level 1 bar smog inspector course 2023 Questions
and Answers
What are 2 types of tsi tests
2500 rpm test; idle test
What are two types of asm test
50/15 test; 25/25 test
What are the fuel caps that are used to calibrate the eis machine
Known good and bad fuel caps
What types of gases are used to calibratethe E I S machine
What does dad stand for
Data acquisition device.
What completed copy of the invoice must the customer receive when they drop
off their vehicle for repairs?
Written estimate.
What is the most important part of completed work order
Customer authorization.
May a test and repair station sublet repairs? If so what repairs?
Exhaust prior to repair
When performing a smog inspection the registration needs to compare to the
vehicle, true or false
True
Are all of the required ECS components listed on the under hood in missions
label
No
Part of the ecs system has been removed from the vehicle. How should this be
entered in the eis?
Missing
The belt is missing from the air pump. There is no visual evidence of tempering.
How should it be entered into the eis?
Defective
What entry should be completed if the ignition system is COP?
Not required
How is nox measured in california emissions test?
You see that oil is dripping from the engine before you start your eis emission
test. What should you do?
Reject vehicle before customer leaves.
During the asm test the maintenance reminder light is on. What should the
technician do?
Continue as normal, not a smog issue
What should you do if the VIN does not match the vehicle registration?
Notify customer
The vehicle failed the emission test. You work at a inspection and repair facility.
What should you do next?
and Answers
What are 2 types of tsi tests
2500 rpm test; idle test
What are two types of asm test
50/15 test; 25/25 test
What are the fuel caps that are used to calibrate the eis machine
Known good and bad fuel caps
What types of gases are used to calibratethe E I S machine
What does dad stand for
Data acquisition device.
What completed copy of the invoice must the customer receive when they drop
off their vehicle for repairs?
Written estimate.
What is the most important part of completed work order
Customer authorization.
May a test and repair station sublet repairs? If so what repairs?
Exhaust prior to repair
When performing a smog inspection the registration needs to compare to the
vehicle, true or false
True
Are all of the required ECS components listed on the under hood in missions
label
No
Part of the ecs system has been removed from the vehicle. How should this be
entered in the eis?
Missing
The belt is missing from the air pump. There is no visual evidence of tempering.
How should it be entered into the eis?
Defective
What entry should be completed if the ignition system is COP?
Not required
How is nox measured in california emissions test?
You see that oil is dripping from the engine before you start your eis emission
test. What should you do?
Reject vehicle before customer leaves.
During the asm test the maintenance reminder light is on. What should the
technician do?
Continue as normal, not a smog issue
What should you do if the VIN does not match the vehicle registration?
Notify customer
The vehicle failed the emission test. You work at a inspection and repair facility.
What should you do next?
