Automotive Exam Study Guide
Questions and Answers 100% Pass
A fire involving gasoline is what class of fire?
B class fire.
Your workplace would will be a much safer place if you:
Know what to do in an emergency.
Exhaust gases in workshops are a serious health hazard. The best way to get rid of these gases is:
With an exhaust extraction system.
Why should you disconnect the battery prior to cleaning a vehicle with solvents?
Because some solvents are highly volatile and can explode.
Material Safety Data Sheets provide information about:
The handling, use and storage of chemicals.
In the case of a building fire, the procedure will involve leaving the building and:
Assembling at a meeting point.
Before you begin a vehicle service, you notice a scratch in the fender paintwork. What should
you do about it?
Make a note of the damage on the job sheet, and bring it to the attention of your supervisor or the
customer.
,If an object is embedded in the eye, you should:
Not attempt to remove it.
The features of a 'caution' sign are:
Yellow background, black text.
Workplace safety requires:
An awareness of the risks
A plan to address the risks
An ongoing commitment to safety
If a standard screwdriver is the correct size it will:
Neatly fit the slot with the blade across the whole width
A soft-faced hammer must be used when?
Damage to the work must be prevented.
Why is one end of a chisel softer than the other?
It won't chip when hit with a hammer.
What is the most common type of pliers?
Combination pliers.
Why is the handle of a box wrench bent'?
To provide full hand grip with work clearance.
A ratchet handle is not recommended for tightening bolts to a high torque value because?
, The ratchet mechanism could be damaged.
A socket extension universal joint may be used when?
The turning force must be applied at an angle.
What tool is used to repair internal threads?
Tap.
If you were to open your hood from the front and look into the engine compartment to your right,
that would be the __________ side of the engine compartment in orientation to the car.
...
SUV stands for:
Sport utility vehicle.
You have a 2005 Chevrolet Cobalt. Cobalt is:
Model.
Where is the VIN number usually located?
On the left front corner of the windshield.
The VIN number assists in:
Identifying the make, model and year of vehicle
Identifying specific vehicle characteristics
Locating specific TSB's/Recalls for that particular vehicle
Why are fluid specifications important?
Questions and Answers 100% Pass
A fire involving gasoline is what class of fire?
B class fire.
Your workplace would will be a much safer place if you:
Know what to do in an emergency.
Exhaust gases in workshops are a serious health hazard. The best way to get rid of these gases is:
With an exhaust extraction system.
Why should you disconnect the battery prior to cleaning a vehicle with solvents?
Because some solvents are highly volatile and can explode.
Material Safety Data Sheets provide information about:
The handling, use and storage of chemicals.
In the case of a building fire, the procedure will involve leaving the building and:
Assembling at a meeting point.
Before you begin a vehicle service, you notice a scratch in the fender paintwork. What should
you do about it?
Make a note of the damage on the job sheet, and bring it to the attention of your supervisor or the
customer.
,If an object is embedded in the eye, you should:
Not attempt to remove it.
The features of a 'caution' sign are:
Yellow background, black text.
Workplace safety requires:
An awareness of the risks
A plan to address the risks
An ongoing commitment to safety
If a standard screwdriver is the correct size it will:
Neatly fit the slot with the blade across the whole width
A soft-faced hammer must be used when?
Damage to the work must be prevented.
Why is one end of a chisel softer than the other?
It won't chip when hit with a hammer.
What is the most common type of pliers?
Combination pliers.
Why is the handle of a box wrench bent'?
To provide full hand grip with work clearance.
A ratchet handle is not recommended for tightening bolts to a high torque value because?
, The ratchet mechanism could be damaged.
A socket extension universal joint may be used when?
The turning force must be applied at an angle.
What tool is used to repair internal threads?
Tap.
If you were to open your hood from the front and look into the engine compartment to your right,
that would be the __________ side of the engine compartment in orientation to the car.
...
SUV stands for:
Sport utility vehicle.
You have a 2005 Chevrolet Cobalt. Cobalt is:
Model.
Where is the VIN number usually located?
On the left front corner of the windshield.
The VIN number assists in:
Identifying the make, model and year of vehicle
Identifying specific vehicle characteristics
Locating specific TSB's/Recalls for that particular vehicle
Why are fluid specifications important?
