NCCER Core Module 1 Questions and
Answers Already Passed
Companies with strong safety cultures usually have lower? ✔✔Turnover
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of
✔✔unsafe conditions
The activity that consists of breaking a job into its component tasks and then analyzing each step
for
potential hazards is called a _____. ✔✔Job Safety Analysis
A measure of the probability, consequences, and exposure related to an event is referred to as
_____. ✔✔Risk
If there is a hole in the floor of a structure, the preferred method of protecting workers from falls
is to _____. ✔✔Cover and mark it
, The D-ring or support point on a safety harness should be placed _____. ✔✔Between the
shoulder blades, middle of your back
A personal fall arrest system should be inspected monthly by a _____. ✔✔Competent person
Lanyards that have no shock-absorbing features are used for _____. ✔✔Positioning
When placing a ladder against a platform or roof, the top of the ladder should extend above the
point where
the ladder touches the platform or roof by at least _____. ✔✔3 Feet
When performing overhead work on scaffolding, what protective measures must be taken to
prevent objects
from falling and striking a person below? ✔✔toe boards, debris nets, or canopies
When stacking materials such as bricks or block, do not stack materials beyond a _____. ✔✔4:1
Ratio
Answers Already Passed
Companies with strong safety cultures usually have lower? ✔✔Turnover
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of
✔✔unsafe conditions
The activity that consists of breaking a job into its component tasks and then analyzing each step
for
potential hazards is called a _____. ✔✔Job Safety Analysis
A measure of the probability, consequences, and exposure related to an event is referred to as
_____. ✔✔Risk
If there is a hole in the floor of a structure, the preferred method of protecting workers from falls
is to _____. ✔✔Cover and mark it
, The D-ring or support point on a safety harness should be placed _____. ✔✔Between the
shoulder blades, middle of your back
A personal fall arrest system should be inspected monthly by a _____. ✔✔Competent person
Lanyards that have no shock-absorbing features are used for _____. ✔✔Positioning
When placing a ladder against a platform or roof, the top of the ladder should extend above the
point where
the ladder touches the platform or roof by at least _____. ✔✔3 Feet
When performing overhead work on scaffolding, what protective measures must be taken to
prevent objects
from falling and striking a person below? ✔✔toe boards, debris nets, or canopies
When stacking materials such as bricks or block, do not stack materials beyond a _____. ✔✔4:1
Ratio
