150+ QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY GRADED
A+
When the side cover of Precision Tower 7920 is not assembled, the system
will still power on. - ANSWER-False
On Latitude 14 Rugged Extreme - 7414, which light is used to
communicate error using Single LED ? - ANSWER-not Power light
We Import a Foreign configuration in a RAID Array, if: - ANSWER-The
array containing foreign configuration is in an Offline state
Select statements that are true about Trusted Platform Module (TPM) -
ANSWER-not The Trusted Platform Module (TPM) is used to generate and
store keys
After completing a service incident on a Precision Tower 7920, technician
attempts to run ePSA before re-assembling the side cover. However,
system is not able to power on and displays LED error code of 4-7. What
could be the issue? - ANSWER-The intrusion switch is triggered and power
is cut-off. Install the side cover to de-activate the intrusion switch.
Before replacing any hardware, what is the recommended solution for the
BSOD or system freezing? - ANSWER-not Reseat the DIMMs
If an Edge Gateway is Blinking green after the diagnostics, what does it
indicate? - ANSWER-ePSA Pass
On a Precision Workstation, if a Hard drive status indicator flashes green,
amber and then turns off; this indicates the drive is rebuilding - ANSWER-
False
, DELL CLIENT ADVANCED 2023-2024 ACTUAL EXAM
150+ QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY GRADED
A+
In general, an Anti-Static Mat is used to prevent Electrostatic damage -
ANSWER-True
Onsite Services for Ruggedized Notebooks are limited to CRU parts and
Service Assembly Parts. - ANSWER-True
How many thermal performance control modes are there in Alienware Area
51m to support different user scenarios? - ANSWER-not 1.0
Overclocking is the process of making a computer or component in a
computer operate faster than specified by the manufacturer by modifying
the system parameters - ANSWER-True
In a PERC H730P controller, P stands for Performance - ANSWER-True
iDRAC with Lifecycle Controller can be used for: - ANSWER-not OS
Deployment
A CAN (Controller Area Network) bus is a vehicle bus standard designed to
allow micro controllers and devices to communicate with each other in
applications without a host computer. - ANSWER-True
Under what scenarios can we clear the NVRAM by moving the PSWD
jumper to the RTCRST pins? - ANSWER-No POST
No Video
, DELL CLIENT ADVANCED 2023-2024 ACTUAL EXAM
150+ QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY GRADED
A+
Where can the Field Service Manual containing Critical Callout,
Disassembly and Reassembly instructions be found? - ANSWER-PRM /
Educate Dell
iDRAC stands for: - ANSWER-Integrated Dell Remote Access Controller
What steps must be taken if there is a fan-related error message displayed
at the Start up, but the system boots to the OS? - ANSWER-not Check for
Dust or debris on the Fans, clean them
The following items are unaffected by the RTC reset: - ANSWER-not
Service Tag
Which screwdriver is recommended for removing PHM (Processor Heat
Sink module) used on a Precision Rack 7920? - ANSWER-Torx #T30
USB Service Key is used for Windows OS installation and debranding (for
OEM) in an Edge Gateway - ANSWER-True
Tobii eye-tracker module enables user to perform the following: -
ANSWER-not Interact intelligently with their computers
Which keyboard key is used in an Edge Gateway 3000 series to start
ePSA? - ANSWER-not F11