Safe Work Practices (All Answered) 2024.

Introduction correct answers The first step in creating a safe work environment is to develop a list of standing orders, or standing operating procedures (SOPs). SOPs are usually developed by the site manager. They assist in safety awareness and enforcement of safety procedures. To ensure that all workers are properly informed, written SOPs, should be distributed to everyone and posted at the command post and entrances. Because they should be routinely updated, they should be reviewed with the field crew regularly. Standing orders should be: Distributed to everyone who enters the site Posted at the command post Posted at the entrance access control points Reviewed with the field crew at the beginning of each workday All new or revised orders communicated to workers In addition to the standing orders, hazardous substance information forms must be posted for all to see. Employees must be briefed on hazardous substances at the beginning of the project, or whenever they first join the work team. Employees must also be updated when previously unknown chemicals are identified on site. Hazards in the Work Environment - Walking and Working Surfaces correct answers Some of the most common work hazards cause slips, trips, and falls on walking and working surfaces. A variety of working surfaces can be hazardous to a worker. If a working surface is not properly engineered or maintained, workers can be seriously injured. Preventative steps include: Adding railings or coverings on any openings such as manholes Adding tread and handrails to steps or slippery surfaces Inspecting and using ladders correctly Checking the safety of scaffolding regularly and using fall-protection devices Openings correct answers Falls from openings can be prevented by using the proper guarding, railings, or coverings to prevent workers from accidentally falling through. Stairs correct answers Stairs need to be designed and constructed so that they can safely carry expected loads. They must be adequately wide and angle as specified in the regulations. The tread on the steps should be slip-resistant, and railings and handrails should properly guard exposed stairways and platforms. Ladders correct answers Many types of ladders are used on a hazardous waste site. Each type has specifications and requirements, including: Maximum length Care and use Proper angle placement of portable ladders Protective cages for fixed ladders' Some safe work practices to follow include: