AC HPAT Physics Well Explained Questions
DIstance
· Distance is a scalar quantity that refers to "how much ground an object has covered"
during its motion.
Displacement
· Displacement is a vector quantity that refers to "how far out of place an object is"; it is
the object's overall change in position.
Position
· Position is a place where someone or something is located or has been put. In
physics, position is usually a number on an axis. ... Position is a vector, because
direction matters. But distance is a scalar. Distance is how far you've traveled.
Speed
· Speed is the distance traveled per unit of time. It is how fast an object is moving.
Speed is the scalar quantity that is the magnitude of the velocity vector. It doesn't have
a direction.
Acceleration
· Acceleration is the rate of change of velocity with time.
Instantenous velocity
· Instantaneous velocity is the velocity of an object in motion at a specific point in time.
This is determined similarly to average velocity, but we narrow the period of time so that
it approaches zero. If an object has a standard velocity over a period of time, its
average and instantaneous velocities may be the same.
A force
a force is any interaction that, when unopposed, will change the motion of an object. A
force can cause an object with mass to change its velocity (which includes to begin
moving from a state of rest), i.e., to accelerate. Force can also be described intuitively
as a push or a pull
Net force
· Net force is the vector sum of forces acting on a particle or body. The net force is a
single force that replaces the effect of the original forces on the particle's motion. It
gives the particle the same acceleration as all those actual forces together as described
by the Newton's second law of motion.
Uniform vs. non-uniform motion
· Difference between uniform and non-uniform motion with examples. In Uniform motion,
movement of a body is along the straight line with constant speed. In non uniform
motion, movement of a body is along the straight line with variable speed. In uniform
motion, body covers equal distance in equal interval of time
What is the difference between constant, instantaneous, and average speed?
· constant speed is where the speed is the same throughout and instantaneous speed is
speed given at any moment and average speed is a total distance traveled divided by
the amount of time it took to travel it.
Newtons Laws
, Newton's first law states that every object will remain at rest or in uniform motion in a
straight line unless compelled to change its state by the action of an external force. The
second law states that the acceleration of an object is dependent upon two variables -
the net force acting upon the object and the mass of the object.
The third law states that for every action (force) in nature there is an equal and opposite
reaction.
Coefficient of friction
· A coefficient of friction is a value that shows the relationship between two objects and
the normal reaction between the objects that are involved. ... The coefficient of friction
depends on the objects that are causing friction. The value is usually between 0 and 1
but can be greater than 1.
Torque
Torque is a measure of the force that can cause an object to rotate about an axis. Just
as force is what causes an object to accelerate in linear kinematics, torque is what
causes an object to acquire angular acceleration. Torque is a vector quantity
Mechanical advantage
· Mechanical advantage is the ratio of the force produced by a machine to the force
applied to it, used in assessing the performance of a machine.
Input vs output force
· The difference between the two is very simple to understand: Input Force represents
the amount of force that you put into another object. Output Force represents the force
that a specific object has as a result of the input force.
Gravitational force
· The gravitational force is a force that attracts any two objects with mass. ... In fact,
every object, including you, is pulling on every other object in the entire universe! This is
called Newton's Universal Law of Gravitation.
Friction
· Friction is a force that holds back the movement of a sliding object. That's it. Friction is
just that simple. You will find friction everywhere that objects come into contact with
each other.
Normal force
· The normal force is the support force exerted upon an object that is in contact with
another stable object. For example, if a book is resting upon a surface, then the surface
is exerting an upward force upon the book in order to support the weight of the book.
Tension
· tension is described as the pulling force transmitted axially by the means of a string, a
cable, chain, or similar one-dimensional continuous object, or by each end of a rod,
truss member, or similar three-dimensional object
kinetic friction
· Kinetic friction magnitude is directly proportional to the normal force magnitude and the
roughness between the sliding surfaces. Static friction magnitude is directly proportional
to the normal force magnitude and the roughness between the sliding surfaces.
Alternating current vs direct current
· AC vs. DC (Alternating Current vs. Direct current) The difference between AC and DC
lies in the direction in which the electrons flow. In DC, the electrons flow steadily in a
DIstance
· Distance is a scalar quantity that refers to "how much ground an object has covered"
during its motion.
Displacement
· Displacement is a vector quantity that refers to "how far out of place an object is"; it is
the object's overall change in position.
Position
· Position is a place where someone or something is located or has been put. In
physics, position is usually a number on an axis. ... Position is a vector, because
direction matters. But distance is a scalar. Distance is how far you've traveled.
Speed
· Speed is the distance traveled per unit of time. It is how fast an object is moving.
Speed is the scalar quantity that is the magnitude of the velocity vector. It doesn't have
a direction.
Acceleration
· Acceleration is the rate of change of velocity with time.
Instantenous velocity
· Instantaneous velocity is the velocity of an object in motion at a specific point in time.
This is determined similarly to average velocity, but we narrow the period of time so that
it approaches zero. If an object has a standard velocity over a period of time, its
average and instantaneous velocities may be the same.
A force
a force is any interaction that, when unopposed, will change the motion of an object. A
force can cause an object with mass to change its velocity (which includes to begin
moving from a state of rest), i.e., to accelerate. Force can also be described intuitively
as a push or a pull
Net force
· Net force is the vector sum of forces acting on a particle or body. The net force is a
single force that replaces the effect of the original forces on the particle's motion. It
gives the particle the same acceleration as all those actual forces together as described
by the Newton's second law of motion.
Uniform vs. non-uniform motion
· Difference between uniform and non-uniform motion with examples. In Uniform motion,
movement of a body is along the straight line with constant speed. In non uniform
motion, movement of a body is along the straight line with variable speed. In uniform
motion, body covers equal distance in equal interval of time
What is the difference between constant, instantaneous, and average speed?
· constant speed is where the speed is the same throughout and instantaneous speed is
speed given at any moment and average speed is a total distance traveled divided by
the amount of time it took to travel it.
Newtons Laws
, Newton's first law states that every object will remain at rest or in uniform motion in a
straight line unless compelled to change its state by the action of an external force. The
second law states that the acceleration of an object is dependent upon two variables -
the net force acting upon the object and the mass of the object.
The third law states that for every action (force) in nature there is an equal and opposite
reaction.
Coefficient of friction
· A coefficient of friction is a value that shows the relationship between two objects and
the normal reaction between the objects that are involved. ... The coefficient of friction
depends on the objects that are causing friction. The value is usually between 0 and 1
but can be greater than 1.
Torque
Torque is a measure of the force that can cause an object to rotate about an axis. Just
as force is what causes an object to accelerate in linear kinematics, torque is what
causes an object to acquire angular acceleration. Torque is a vector quantity
Mechanical advantage
· Mechanical advantage is the ratio of the force produced by a machine to the force
applied to it, used in assessing the performance of a machine.
Input vs output force
· The difference between the two is very simple to understand: Input Force represents
the amount of force that you put into another object. Output Force represents the force
that a specific object has as a result of the input force.
Gravitational force
· The gravitational force is a force that attracts any two objects with mass. ... In fact,
every object, including you, is pulling on every other object in the entire universe! This is
called Newton's Universal Law of Gravitation.
Friction
· Friction is a force that holds back the movement of a sliding object. That's it. Friction is
just that simple. You will find friction everywhere that objects come into contact with
each other.
Normal force
· The normal force is the support force exerted upon an object that is in contact with
another stable object. For example, if a book is resting upon a surface, then the surface
is exerting an upward force upon the book in order to support the weight of the book.
Tension
· tension is described as the pulling force transmitted axially by the means of a string, a
cable, chain, or similar one-dimensional continuous object, or by each end of a rod,
truss member, or similar three-dimensional object
kinetic friction
· Kinetic friction magnitude is directly proportional to the normal force magnitude and the
roughness between the sliding surfaces. Static friction magnitude is directly proportional
to the normal force magnitude and the roughness between the sliding surfaces.
Alternating current vs direct current
· AC vs. DC (Alternating Current vs. Direct current) The difference between AC and DC
lies in the direction in which the electrons flow. In DC, the electrons flow steadily in a
